linux下添加逻辑分区并挂载(手动和自动方式)

一、查看新磁盘
[[email protected] Desktop]# fdisk -cul /dev/sdc

Disk /dev/sdc: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders, total 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
二添加逻辑分区
[[email protected] Desktop]# fdisk -cu /dev/sdc
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x740491c5.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won‘t be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition‘s system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)

Command (m for help): n
Command action
e extended
p primary partition (1-4)
e---------------〉选择扩展分区
Partition number (1-4): 2
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): 10G
Value out of range.
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +10G

Command (m for help): N
Command action
l logical (5 or over)
p primary partition (1-4)
L-----------------〉选择逻辑分区
First sector (4096-20973567, default 4096):
Using default value 4096
Last sector, +sectors or +size{K,M,G} (4096-20973567, default 20973567): +5G

Command (m for help): N
Command action
l logical (5 or over)
p primary partition (1-4)
L-------------------〉选择逻辑分区
First sector (10491904-20973567, default 10491904):
Using default value 10491904
Last sector, +sectors or +size{K,M,G} (10491904-20973567, default 20973567): +5G
Value out of range.
Last sector, +sectors or +size{K,M,G} (10491904-20973567, default 20973567):
Using default value 20973567

Command (m for help): P--------------->打印分区列表

Disk /dev/sdc: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders, total 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x740491c5

Device Boot Start End Blocks Id System
/dev/sdc2 2048 20973567 10485760 5 Extended
/dev/sdc5 4096 10489855 5242880 83 Linux
/dev/sdc6 10491904 20973566 5240831+ 83 Linux
自动命名逻辑分区为:sdc5 sdc6
Command (m for help): w------------------>保存退出
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
[[email protected] Desktop]# part
parted partprobe partx
[[email protected] Desktop]# partx -a /dev/sdc
BLKPG: Device or resource busy
error adding partition 2
BLKPG: Device or resource busy
error adding partition 5
BLKPG: Device or resource busy
error adding partition 6
三、查看新分区
[[email protected] Desktop]# fdisk -cu /dev/sdc

Command (m for help): p

Disk /dev/sdc: 21.5 GB, 21474836480 bytes
139 heads, 49 sectors/track, 6158 cylinders, total 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x740491c5

Device Boot Start End Blocks Id System
/dev/sdc2 2048 20973567 10485760 5 Extended
/dev/sdc5 4096 10489855 5242880 83 Linux
/dev/sdc6 10491904 20973566 5240831+ 83 Linux

Command (m for help): q
四、格式化分区
1sdc5
[[email protected] Desktop]# mkfs.ext4 /dev/sdc5
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
327680 inodes, 1310720 blocks
65536 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1342177280
40 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 38 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
2sdc6
[[email protected] Desktop]# mkfs.ext4 /dev/sdc6
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
327680 inodes, 1310207 blocks
65510 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1342177280
40 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 30 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
五、新建挂载目录
[[email protected] Desktop]# cd /mnt/
[[email protected] mnt]# ls
hgfs
[[email protected] mnt]# mkdir sdc{5,6}
[[email protected] mnt]# ls
hgfs sdc5 sdc6
[[email protected] mnt]# pwd
/mnt
六、分别自动挂载sdc5、sdc6到/mnt/sdc5 、 /mnt/sdc6
[[email protected] mnt]# mount /dev/sdc5 /mnt/sdc5
[[email protected] mnt]# mount /dev/sdc6 /mnt/sdc6
七、查可挂载是否成功
[[email protected] mnt]# mount
/dev/mapper/vol0-root on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0")
/dev/sda1 on /boot type ext4 (rw)
/dev/mapper/vol0-home on /home type ext4 (rw)
/dev/sdb5 on /tmp/sdb5 type ext4 (rw)
/dev/sdb6 on /tmp/sdb6 type ext4 (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
vmware-vmblock on /var/run/vmblock-fuse type fuse.vmware-vmblock (rw,nosuid,nodev,default_permissions,allow_other)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev)
/dev/sdc5 on /mnt/sdc5 type ext4 (rw)
/dev/sdc6 on /mnt/sdc6 type ext4 (rw)
九、卸载sdc5 sdc6
[[email protected] mnt]# umount /dev/sdc5
[[email protected] mnt]# umount /dev/sdc6
[[email protected] mnt]# mount
/dev/mapper/vol0-root on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0")
/dev/sda1 on /boot type ext4 (rw)
/dev/mapper/vol0-home on /home type ext4 (rw)
/dev/sdb5 on /tmp/sdb5 type ext4 (rw)
/dev/sdb6 on /tmp/sdb6 type ext4 (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
vmware-vmblock on /var/run/vmblock-fuse type fuse.vmware-vmblock (rw,nosuid,nodev,default_permissions,allow_other)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev)
十、手工挂载
1、查看sdb5的UUID
[[email protected] mnt]#blkid /dev/sdb5
2、手工挂载sdb5、sdb6
[[email protected] mnt]# cd /etc
[[email protected] etc]# vi fstab

#
# /etc/fstab
# Created by anaconda on Fri Apr 11 00:49:26 2014
#
# Accessible filesystems, by reference, are maintained under ‘/dev/disk‘
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vol0-root / ext4 defaults 1 1
UUID=9353a628-e49f-4675-abf4-b0fe76b38fbc /boot ext4 defaults 1 2
/dev/mapper/vol0-home /home ext4 defaults 1 2
UUID=f3d4a81c-f2d6-48d8-be1a-35647cd74615 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
UUID=dfa6e086-e5be-4856-9e8d-9565d52b82e6 /mnt/sdc5 ext4 defaults 0 0
/dev/sdc6 /mnt/sdc6 ext4 defaults 0 0
方式有通过分区名和UUID
十一、查看挂载结果
[[email protected] etc]# mount -a------------------〉刷新mount
[[email protected] etc]# mount
/dev/mapper/vol0-root on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0")
/dev/sda1 on /boot type ext4 (rw)
/dev/mapper/vol0-home on /home type ext4 (rw)
/dev/sdb5 on /tmp/sdb5 type ext4 (rw)
/dev/sdb6 on /tmp/sdb6 type ext4 (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
vmware-vmblock on /var/run/vmblock-fuse type fuse.vmware-vmblock (rw,nosuid,nodev,default_permissions,allow_other)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev)
/dev/sdc5 on /mnt/sdc5 type ext4 (rw)
/dev/sdc6 on /mnt/sdc6 type ext4 (rw)
[[email protected] etc]#

原文地址:https://www.cnblogs.com/w-wfy/p/8870755.html

时间: 2024-10-07 02:10:48

linux下添加逻辑分区并挂载(手动和自动方式)的相关文章

Linux下 扩展逻辑分区和扩展逻辑卷组

开始我有个小误区,一时没有想通现在写出来,希望以后不会再犯. 练习之前,我首先添加了一块10G的硬盘,然后将该盘分区:如下 fdisk /dev/sdb  n p 4 t 8e w pvcreate /dev/sdb4 pvdisplay vgcreate  VG01  /dev/sdb4 vgdisplay lvcreate -L 100M -n lvdata1  VG01 mkfs -t ext3 /dev/VG01/lvdata1 注意关键是这里的100M,本来是10G的硬盘,我一开只划分

linux下扩大SWAP分区及挂载磁盘

1.挂载磁盘 fdisk /dev/xvdbpartprobe /dev/xvdbmkfs -t ext4 /dev/xvdb1mount /dev/xvdb1 /u01/oracle/recoverydata/umount /dev/xvdb1vim /etc/fstab 永久性挂载配置/dev/xvdb1 /u01/oracle/recoverydata ext4 defaults 1 1 2.挂载CDROM 放入安装光盘,加载光驱.mkdir /media/rhelmount /dev/c

Linux下的磁盘分区和逻辑卷

一.硬盘接口类型 硬盘的接口主要有IDE.SATA.SCSI .SAS和光纤通道等五种类型.其中IDE和SATA接口硬盘多用于家用产品中,也有部分应用于服务器,SATA是一种新生的硬盘接口类型,已经取代了大部分IDE接口应用.SCSI .SAS主要应用于服务器上,普通家用设备一般不支持SCSI和SAS接口.SAS也是是一种新生的硬盘接口类型,可以和SATA以及部分SCSI设备无缝结合.光纤通道最初设计也不是为了硬盘设计开发的接口,是专门为网络系统设计的,但随着存储系统对速度的需求,才逐渐应用到硬

linux下硬盘的分区:

提到硬盘的分区,以前就是很乱,有什么主分区/扩展分区/逻辑分区等;它们有什么区别呢?现在简单的了解一下: 由于在MBR的主引导记录中的分区表里面最多只能记录4个分区记录,这个不够用啊,为了解决这个问题,就允许创建一个扩展分区,在扩展分区里面我们可以继续分区(即逻辑分区);例如:我们最多可以创建4个主分区,当我们要创建6个分区时:我们可以创建3个主分区1个扩展分区,然后再在扩展分区里面创建3个逻辑分区;在主引导记录里面,只包含主分区与扩展分区的信息,而逻辑分区的信息都被保存在了扩展分区里面; 在L

Linux下的MBR分区

MBR分区 下面讲一讲如何给一块新添加入服务器的硬盘做MBR分区,那么为什么叫做MBR分区呢?后面会讲 做MBR分区,使用系统自带的fdisk工具.先看一看什么是fdisk,在命令行输入“fdisk”,如下: 上面是有关fdisk的信息以及相关的帮助信息. 然后再看一看系统中的分区情况,输入命令“fdisk -l”即可.截图如下: 从上图中发现系统中存在一块设备/dev/sdb,大小为8589M,我们还没有给其进行分区.下面我们就来给它进行分区吧. 我们通过命令”fdisk /dev/sdb”进

linux 下的GPT分区

Linux下的GPT分区,这是另外一种分区,针对MBR分区,它有很多优点: (1)几乎突破了分区个数的限制. 在GPT分区表中最多可以支持128个主分区. (2)单个分区容量几乎没有限制. 单个分区最大支持1EB容量. 因此GPT分区中,主分区和扩展分区,逻辑分区的概念已经很模糊了.甚至没必要这么叫.其实我们知道 扩展分区之所以存在,意义就是为了解决MBR中分区个数的限制问题.既然在GPT中,分区个数几乎没有了 限制,那么这些概念当然就模糊起来了. (3)以下是创建GPT分区的步骤: 依然是新加

Linux下的GPT分区,使用parted命令

Linux下的GPT分区,这是另外一种分区,针对MBR分区,它有很多优点: (1)几乎突破了分区个数的限制. 在GPT分区表中最多可以支持128个主分区. (2)单个分区容量几乎没有限制. 单个分区最大支持1EB容量. 因此GPT分区中,主分区和扩展分区,逻辑分区的概念已经很模糊了.甚至没必要这么叫.其实我们知道 扩展分区之所以存在,意义就是为了解决MBR中分区个数的限制问题.既然在GPT中,分区个数几乎没有了 限制,那么这些概念当然就模糊起来了. 好了,废话不多说,讲解GPT分区的步骤吧. 依

Linux 硬盘格式化、分区、挂载、卸载、删除分区

Linux 硬盘格式化.分区.挂载.卸载.删除分区 Linux 2.6 kernel以后,linux会将识别到的硬件设备,在/dev/下建立相应的设备文件.如: sda 表示第1块SCSI硬盘 hda 表示第1块IDE硬盘(即连接在第1个IDE接口的Master口上) scd0 表示第1个USB光驱. 0. 查看挂载情况 df -hl 看到系统只挂载了40G的 /dev/vda1 在 / 目录下, 分别分给了不同文件夹 1. 查看硬盘信息 fdisk -l 有一个 20G 的 /dev/vdb

Linux下添加shell脚本使得nginx日志每天定时切割压缩

Linux下添加shell脚本使得nginx日志每天定时切割压缩一 简介 对于nginx的日志文件,特别是access日志,如果我们不做任何处理的话,最后这个文件将会变得非常庞大 这时,无论是出现异常时查日志,还是使用"GoAccess"等工具对日志进行分析都将会变得非常麻烦.因此,每天定时对nginx日志进行切割压缩就非常有必要了 二 实现 我的实现思路是每天晚上接近12点时定时执行脚本.其脚本内容就是将当前的nginx日志先按照当天日期进行重命名接着进行压缩,最后是新建空白的ngi