NX二次开发-UFUN添加工程图投影视图UF_DRAW_add_orthographic_view

 1 NX9+VS2012
 2
 3 #include <uf.h>
 4 #include <uf_draw.h>
 5 #include <uf_obj.h>
 6 #include <uf_part.h>
 7
 8 UF_initialize();
 9
10 //新建工程图(A4图纸)
11 char* DrawingName = "Sheet1";//设置图纸名字
12 UF_DRAW_info_t DrawingInfo;//设置图纸大小、投影视角、视图比例等
13 DrawingInfo.size_state = UF_DRAW_METRIC_SIZE;//设置图纸类型
14 DrawingInfo.size.metric_size_code = UF_DRAW_A4;//设置图纸大小
15 DrawingInfo.drawing_scale = 1.0;//设置比例
16 DrawingInfo.units = UF_PART_METRIC;//设置单位
17 DrawingInfo.projection_angle = UF_DRAW_FIRST_ANGLE_PROJECTION;//设置投影视角
18 tag_t DrawingTag = NULL_TAG;
19 UF_DRAW_create_drawing(DrawingName, &DrawingInfo, &DrawingTag);
20
21 //导入视图(创建Top视图)
22 //找名字获取视图的Tag
23 tag_t TopViewTag = NULL_TAG;
24 UF_OBJ_cycle_by_name_and_type(UF_PART_ask_display_part(), "Top", UF_view_type, false, &TopViewTag);
25
26 UF_DRAW_view_info_t TopViewInfo;
27 UF_DRAW_initialize_view_info(&TopViewInfo);//初始化视图信息
28 double TopDwgPoint[2] = {150.0, 160.0};
29 tag_t TopDrawViewTag = NULL_TAG;
30 UF_DRAW_import_view(DrawingTag, TopViewTag, TopDwgPoint, &TopViewInfo, &TopDrawViewTag);
31
32 //添加投影视图
33 //UF_DRAW_project_infer = 0，自动判断
34 //UF_DRAW_project_above,上
35 //UF_DRAW_project_right,右
36 //UF_DRAW_project_below,下
37 //UF_DRAW_project_left左
38 UF_DRAW_proj_dir_t RightProjection =  UF_DRAW_project_right;
39 double RightDwgPoint[2] = {35.0, 160.0};
40 tag_t RightViewTag = NULL_TAG;
41 UF_DRAW_add_orthographic_view(DrawingTag, TopDrawViewTag, RightProjection, RightDwgPoint, &RightViewTag);
42
43 //更新视图
44 UF_DRAW_update_one_view(DrawingTag, TopDrawViewTag);
45 UF_DRAW_update_one_view(DrawingTag, RightViewTag);
46
47 UF_terminate();

原文地址：https://www.cnblogs.com/nxopen2018/p/10957630.html