硬件准备：
USB转串口
4针杜邦线
PN532模块
IC卡一张(比如门禁卡，饭卡等)
软件准备：
Ubuntu 物理机一台
能够访问互联网
1，将PN532与USB转串口连接好,放一张IC卡靠近PN532模块
2，安装libnfc：
[email protected]:~$ sudo apt-get install libusb-dev
[email protected]:~$ wget https://github.com/nfc-tools/libnfc/releases/download/libnfc-1.7.1/libnfc-1.7.1.tar.bz2
[email protected]:~$ tar xf libnfc-1.7.1.tar.bz2
[email protected]:~$ cd libnfc-1.7.1/
[email protected]:~/libnfc-1.7.1$ ./configure --prefix=${HOME}/NFC && make && make install
[email protected]:~/libnfc-1.7.1$ mkdir -p ${HOME}/NFC/etc/nfc/
[email protected]:~/libnfc-1.7.1$ vim ${HOME}/NFC/etc/nfc/libnfc.conf
device.name = "microBuilder.eu"
device.connstring = "pn532_uart:/dev/ttyUSB0"
[email protected]:~/libnfc-1.7.1$
3，检查Pn532与主机连接状态：
[email protected]:~/libnfc-1.7.1$ sudo ${HOME}/NFC/bin/nfc-list
/home/chunli/NFC/bin/nfc-list uses libnfc 1.7.1
NFC device: pn532_uart:/dev/ttyUSB0 opened
1 ISO14443A passive target(s) found:
ISO/IEC 14443A (106 kbps) target:
ATQA (SENS_RES): 00 04
UID (NFCID1): 7e d5 92 90
SAK (SEL_RES): 08
[email protected]:~/libnfc-1.7.1$
驱动安装好了。
时间： 2024-10-10 16:22:14