1、centos6网卡重启：service network restart
centos7网卡重启：systemctl restart network
[[email protected] ~]# systemctl restart network
网卡配置文件：
[[email protected] network-scripts]# cat -n ifcfg-ens33
[[email protected] network-scripts]# pwd
/etc/sysconfig/network-scripts
1 TYPE=Ethernet
2 PROXY_METHOD=none
3 BROWSER_ONLY=no
4 BOOTPROTO=dhcp
5 DEFROUTE=yes
6 IPV4_FAILURE_FATAL=no
7 IPV6INIT=yes
8 IPV6_AUTOCONF=yes
9 IPV6_DEFROUTE=yes
10 IPV6_FAILURE_FATAL=no
11 IPV6_ADDR_GEN_MODE=stable-privacy
12 NAME=ens33
13 UUID=8bfc7f02-2ae1-42e2-8c97-a0bc98135071
14 DEVICE=ens33
15 ONBOOT=yes
网卡配置文件：
设备类型:TYPE=Ethernet
地址分配模式:BOOTPROTO=static
网卡名称:NAME=ens33
是否启动:ONBOOT=yes
IP地址:IPADDR=192.168.30.102
子网掩码:NETMASK=255.255.255.0
网关地址:GATEWAY=192.168.30.1
DNS地址:DNS1=192.168.30.1
2、DNS配置文件：cat /etc/resolv.conf
主机和IP绑定：cat /etc/hosts
主机名：cat /etc/hostname
3、关闭防火墙并设置开机不启动
centos 7
查看防火墙状态：systemctl status firewalld
关闭：systemctl stop firewalld
开启：systemctl start firewalld
开机自动关闭：systemctl disable firewalld
开机自动启动：systemctl enable firewalld
centos6
关闭防火墙
chkconfig iptables off
开启防火墙
chkconifg iptables on
查看开机是否启动：chkconfig --list|grep network(centos 6 )
chkconfig iptables --list
4、临时和永久关闭Selinux
临时关闭：
getenforce
[[email protected] ~]# getenforce
Enforcing
setenforce 0
[[email protected] ~]# setenforce
usage: setenforce [ Enforcing | Permissive | 1 | 0 ]
setenforce:SELinux is disabled
修改配置文件：
vim /etc/selinux/config
原文地址：https://blog.51cto.com/13718453/2468397