对于linux系统的使用者来说如何正确的来进行系统的分区，如何当初对系统评估不准确的话，那么一旦系统分区不够用了，那么不得不备份，删除相关数据，重要的时候被迫还得重新规划分区并装系统来满足需求。今天我们来写一下如何在linux下进行LVM逻辑卷的使用，让我们自由调整分区容量。
一． LVM逻辑卷管理
- 概述
LVM：（逻辑卷管理Logical Volume Manager）就是可以自由调整分区大小 作用：动态调整磁盘容量，从而提高磁盘管理的灵活性
需要注意：/boot分区用于存放引导文件，不能基于LVM创建
图形界面：system-config-lvm- LVM的管理命令
PV（Physical Volume，物理卷）
整个硬盘，或使用fdisk等工具建立的普通分区
包括许多默认4MB大小的PE（Physical Extent，基本单元）VG（Volume Group，卷组）
一个或多个物理卷组合而成的整体LV（Logical Volume，逻辑卷）
从卷组中分割出的一块空间，用于建立文件系统- LVM应用实例
| 功能 | 物理卷管理 | 卷组管理 | 逻辑卷管理 |
| Scan 扫描 | pvscan | vgscan | lvscan |
| Create 建立 | pvcreate | vgcreate | lvcreate |
| Display 显示 | pvdisplay | vgdisplay | lvdisplay |
| Remove 删除 | pvremove | vgremove | lvremove |
| Extend 扩展 | vgextend | lvextend | |
| Reduce 减少 | vgreduce | lvreduce |
首先我在系统上添加了两块硬盘 /dev/sdb /dev/dbc来为下面的LVM做准备，你也可以先进行fdisk工具分完区然后再做PV,此处我们直接拿新添加的硬盘来做PV
1.物理卷【PV】的创建、删除.
- 创建物理卷【pvcreate 设备名/设备名2….】
[[email protected] ~]# pvcreate /dev/sdb /dev/sdc
Physical volume "/dev/sdb" successfully created
Physical volume "/dev/sdc" successfully created
[[email protected] ~]# pvscan
PV VG Fmt Attr PSize PFree
/dev/sda2 VolGroup lvm2 a-- 49.51g 0
/dev/sdb lvm2 a-- 100.00g 100.00g
/dev/sdc lvm2 a-- 50.00g 50.00g
[[email protected] ~]# pvdisplay
--- Physical volume ---
"/dev/sdb" is a new physical volume of "100.00 GiB"
--- NEW Physical volume ---
PV Name /dev/sdb
VG Name
PV Size 100.00 GiB
Allocatable NO
PE Size 0
Total PE 0
Free PE 0
Allocated PE 0
PV UUID su9PDS-jtXa-SKWH-n4Pf-TM0j-w8SW-swgd6d
"/dev/sdc" is a new physical volume of "50.00 GiB"
--- NEW Physical volume ---
PV Name /dev/sdc
VG Name
PV Size 50.00 GiB
Allocatable NO
PE Size 0
Total PE 0
Free PE 0
Allocated PE 0
PV UUID AASOe8-1yje-2rjn-O33d-0y27-PmIw-YoYCpF- 删除物理卷【pvremove 设备名/设备名2….】前提是下面没有分配VG
[root@localhost ~]# pvremove /dev/sdc
Labels on physical volume "/dev/sdc" successfully wiped
[root@localhost ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sdb vg_new lvm2 a-- 100.00g 50.00g
[root@localhost ~]# pvdisplay
--- Physical volume ---
PV Name /dev/sdb
VG Name vg_new
PV Size 100.00 GiB / not usable 4.00 MiB
Allocatable yes
PE Size 4.00 MiB
Total PE 25599
Free PE 12799
Allocated PE 12800
PV UUID su9PDS-jtXa-SKWH-n4Pf-TM0j-w8SW-swgd6d2.卷组【VG】创建、扩展、减少、删除、
- 创建卷组【vgcreate 卷组名 物理卷名1 物理卷名2 】
[[email protected] ~]# vgcreate vg_new /dev/sdb /dev/sdc
Volume group "vg_new" successfully created
[[email protected] ~]# vgscan
Reading all physical volumes. This may take a while...
Found volume group "vg_new" using metadata type lvm2
Found volume group "VolGroup" using metadata type lvm2
[[email protected] ~]# vgdisplay
--- Volume group ---
VG Name vg_new
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 2
Act PV 2
VG Size 149.99 GiB
PE Size 4.00 MiB
Total PE 38398
Alloc PE / Size 0 / 0
Free PE / Size 38398 / 149.99 GiB
VG UUID qZmTmm-g2fV-La4E-vzcN-yN9S-giyQ-eWra2G- 扩展卷组【vgextend 卷组名 物理卷名】
[root@localhost ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg_new 1 0 0 wz--n- 50.00g 50.00g
[root@localhost ~]# vgextend vg_new /dev/sdb
Volume group "vg_new" successfully extended
[root@localhost ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg_new 2 0 0 wz--n- 149.99g 149.99g
[root@localhost ~]# vgdisplay
--- Volume group ---
VG Name vg_new
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 2
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 2
Act PV 2
VG Size 149.99 GiB
PE Size 4.00 MiB
Total PE 38398
Alloc PE / Size 0 / 0
Free PE / Size 38398 / 149.99 GiB
VG UUID 31tIMa-ldzd-caOd-0lsl-tZnY-QN47-H6mYO9- 缩减卷组【vgreduce 卷组名 物理卷】
[root@localhost ~]# vgreduce vg_new /dev/sdb
Removed "/dev/sdb" from volume group "vg_new"
[root@localhost ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg_new 1 0 0 wz--n- 50.00g 50.00g
[root@localhost ~]# vgdisplay
--- Volume group ---
VG Name vg_new
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 50.00 GiB
PE Size 4.00 MiB
Total PE 12799
Alloc PE / Size 0 / 0
Free PE / Size 12799 / 50.00 GiB
VG UUID 31tIMa-ldzd-caOd-0lsl-tZnY-QN47-H6mYO9- 删除卷组【vgremove 卷组名 】
[root@localhost ~]# vgs
VG #PV #LV #SN Attr VSize VFree
VolGroup 1 2 0 wz--n- 49.51g 0
vg_new 1 0 0 wz--n- 50.00g 50.00g
[root@localhost ~]# vgremove vg_new
Volume group "vg_new" successfully removed3.逻辑卷【LV】创建、扩展、缩减、删除
- 创建逻辑卷【lvcreate -L 大小 -n 逻辑卷名 卷组名 】
[root@localhost ~]# lvcreate -L 50G -n lv_new vg_new
Logical volume "lv_new" created
[root@localhost ~]# lvscan
ACTIVE ‘/dev/vg_new/lv_new‘ [50.00 GiB] inherit
[root@localhost ~]# lvdisplay
--- Logical volume ---
LV Path /dev/vg_new/lv_new
LV Name lv_new
VG Name vg_new
LV UUID wxH3Nn-GKXH-UrRX-Xotl-1bVi-GWUC-VQejzZ
LV Write Access read/write
LV Creation host, time localhost, 2016-04-17 13:17:13 -0400
LV Status available
# open 0
LV Size 50.00 GiB
Current LE 12800
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:2 - 扩展逻辑卷【lvextend -L +大小 /dev/卷组名/逻辑卷名】
[[email protected] ~]# lvs
LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert
lv_new vg_new -wi-a---- 50.00g
[[email protected] ~]# lvextend -L +20G /dev/vg_new/lv_new
Extending logical volume lv_new to 70.00 GiB
Logical volume lv_new successfully resized
[[email protected] ~]# lvdisplay
--- Logical volume ---
LV Path /dev/vg_nw/lv_new
LV Name lv_new
VG Name vg_new
LV UUID 1JAHRk-JShy-jsqE-IpOL-Bzbq-VGOS-0HhVtz
LV Write Access read/write
LV Creation host, time localhost, 2016-04-17 13:56:42 -0400
LV Status available
# open 0
LV Size 70.00 GiB
Current LE 17920
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:2- 缩减逻辑卷空间【注意：必须按以下几步操作】
1、 先卸载逻辑卷lv_new 【逻辑卷只在挂载目录使用】
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root
ext4 45G 3.2G 40G 8% /
tmpfs tmpfs 491M 0 491M 0% /dev/shm
/dev/sda1 ext4 485M 38M 423M 9% /boot
/dev/mapper/vg_new-lv_new
ext4 69G 180M 66G 1% /date
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# umount /date2、 然后通过e2fsck命令检测逻辑卷上空余的空间。
[[email protected] ~]# e2fsck -f /dev/vg_new/lv_new
e2fsck 1.41.12 (17-May-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/vg_new/lv_new: 139/4587520 files (0.0% non-contiguous), 334336/18350080 blocks3、 使用resize2fs将文件系统减少到50G。
[[email protected] ~]# resize2fs /dev/mapper/vg_new-lv_new 50G
resize2fs 1.41.12 (17-May-2010)
Resizing the filesystem on /dev/mapper/vg_new-lv_new to 13107200 (4k) blocks.
The filesystem on /dev/mapper/vg_new-lv_new is now 13107200 blocks long.4、 再使用lvreduce命令将逻辑卷减少到50G。
[root@localhost ~]# lvreduce -L 50G /dev/vg_new/lv_new
WARNING: Reducing active logical volume to 50.00 GiB
THIS MAY DESTROY YOUR DATA (filesystem etc.)
Do you really want to reduce lv_new? [y/n]: Y
Reducing logical volume lv_new to 50.00 GiB
Logical volume lv_new successfully resized
[[email protected] ~]# mount /dev/vg_new/lv_new /date
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root
ext4 45G 3.2G 40G 8% /
tmpfs tmpfs 491M 0 491M 0% /dev/shm
/dev/sda1 ext4 485M 38M 423M 9% /boot
/dev/mapper/vg_new-lv_new
ext4 50G 182M 47G 1% /date注意：文件系统大小和逻辑卷大小一定要保持一致才行。如果逻辑卷大于文件系统，由于部分区域未格式化成文件系统会造成空间的浪费。如果逻辑卷小于文件系统，哪数据就出问题了
- 删除逻辑卷【lvremove /dev/vg_new/lv_new】
[root@localhost ~]# lvs
LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert
lv_new vg_new -wi-a---- 50.00g
[root@localhost ~]# lvremove /dev/vg_new/lv_new
Do you really want to remove active logical volume lv_new? [y/n]: Y
Logical volume "lv_new" successfully removed如果某一个块物理磁盘或者分区故障了，如何将数据转移到其他卷组空间中。
1、通过pvmove命令转移空间数据
[[email protected] ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda2 VolGroup lvm2 a-- 49.51g 0
/dev/sdb vg0 lvm2 a-- 100.00g 100.00g
/dev/sdc vg0 lvm2 a-- 50.00g 50.00g
[[email protected] ~]# pvmove /dev/sdb /dev/sdc2、通过vgreduce命令将即将坏的磁盘或者分区从卷组vgdata里面移除除去。
[root@localhost ~]# vgreduce lv_new /dev/sdb
3、通过pvremove命令将即将坏的磁盘或者分区从系统中删除掉。
[root@localhost ~]# pvremove /dev/sdb4、手工拆除硬盘或者通过一些工具修复分区。
二．设置磁盘配额
- 实现磁盘限额的条件
1.需要Linux内核支持
2.安装quota软件包- Linux磁盘限额的特点
作用范围：针对指定的文件系统（分区）
限制对象：用户帐号、组帐号
限制类型：
磁盘容量（默认单位为KB）
文件数量
限制方法：
软限制：一个用户在一定时间范围内（默认为一周，可以使用命令“edquota -t”重新设置，时间单位可以为天、小时、分 钟、秒）超过其限制的额度，在不超出硬限制的范围内可以继续使用空间，系统会发出警告（警告信息设置文件为“/etc/warnquota.conf”），但如果用户达到时间期限仍未释放空间到限制的额度下，系统将不再允许该用户使用更多的空间。
硬限制：一个用户可拥有的磁盘空间或文件的绝对数量，绝对不允许超过这个限制。- 启用文件系统的配额支持
添加usrquota、grpquota挂载参数 - 检测磁盘配额并创建配额文件
使用quotacheck命令创建配额文件
quotacheck -ugcv 文件系统
quotacheck -augcv
-u、-g：检测用户、组配额
-c：创建配额数据文件
-v：显示执行过程信息
-a：检测所有可用的分区- 编辑用户和组帐号的配额设置
使用edquota命令编辑配额设置
edquota -u 用户名
edquota -g 组名- 启用、关闭文件系统的配额功能
使用quotaon、quotaoff命令- 验证磁盘配额功能
必须切换到设置配额的分区（挂载目录）
创建指定数量的文件：使用touch命令，或cp命令
创建指定容量的文件：使用dd命令，或cp命令- 查看配额使用情况
侧重用户、组帐号角度：使用quota命令
quota -u 用户名
quota -g 组名
侧重文件系统角度：使用repquota1. 练习步骤：
- 创建用户hunter，并设置为此用户进行磁盘配额
[root@localhost ~]# useradd hunter
[root@localhost ~]# passwd hunter
Changing password for user hunter.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.- 创建一个逻辑分区，对此分区设置配额。
[[email protected] ~]# fdisk /dev/sdb
WARNING: DOS-compatible mode is deprecated. It‘s strongly recommended to
switch off the mode (command ‘c‘) and change display units to
sectors (command ‘u‘).
Command (m for help): n
Command action
e extended
p primary partition (1-4)
e
Partition number (1-4): 4
First cylinder (1-13054, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-13054, default 13054):
Using default value 13054
Command (m for help):
Command (m for help): p
Disk /dev/sdb: 107.4 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xb8d88355
Device Boot Start End Blocks Id System
/dev/sdb4 1 13054 104856223+ 5 Extended
Command (m for help): n
Command action
l logical (5 or over)
p primary partition (1-4)
l
First cylinder (1-13054, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-13054, default 13054):
Using default value 13054
Command (m for help): p
Disk /dev/sdb: 107.4 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xb8d88355
Device Boot Start End Blocks Id System
/dev/sdb4 1 13054 104856223+ 5 Extended
/dev/sdb5 1 13054 104856192 83 Linux
Command (m for help): w
[[email protected] ~]# ls /dev/sdb*
/dev/sdb /dev/sdb4 /dev/sdb5
[[email protected] ~]# partx -a /dev/sdb
sdb sdb4 sdb5
[[email protected] ~]# partx -a /dev/sdb
BLKPG: Device or resource busy
error adding partition 4
BLKPG: Device or resource busy
error adding partition 5
[[email protected] ~]# ls /dev/sdb*
/dev/sdb /dev/sdb4 /dev/sdb5- 创建挂载点，并格式化分区和文件系统
[[email protected] ~]# mkdir /quota
[[email protected] ~]# mkfs.ext4 /dev/sdb5
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
6553600 inodes, 26214048 blocks
1310702 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
800 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 25 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.修改配置文件，设置挂载位置永久生效。
[[email protected] date]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root
ext4 45G 3.2G 40G 8% /
tmpfs tmpfs 491M 0 491M 0% /dev/shm
/dev/sda1 ext4 485M 38M 423M 9% /boot
/dev/sdb5 ext4 99G 188M 94G 1% /quota
[[email protected] date]# vim /etc/fstab
#
# /etc/fstab
# Created by anaconda on Mon Jun 15 08:16:31 2015
#
# Accessible filesystems, by reference, are maintained under ‘/dev/disk‘
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/VolGroup-lv_root / ext4 defaults 1 1
UUID=1773339b-7194-409d-872d-6a850058e748 /boot ext4 defaults 1 2
/dev/mapper/VolGroup-lv_swap swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
[[email protected] date]# mount -a
[[email protected] date]# df -TH
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root
ext4 49G 3.5G 43G 8% /
tmpfs tmpfs 515M 0 515M 0% /dev/shm
/dev/sda1 ext4 508M 39M 443M 9% /boot
/dev/sdb5 ext4 106G 197M 101G 1% /quota- 使用quotacheck命令生成配置磁盘配置的数据库文件，如果出现以下权限不够的情况，通过setenforce 0临时关掉selinux就可以了，quotacheck执行成功可以看到/quota/下面多了两个文件。然后通过quotaon /quota/启动对应文件系统上的磁盘配额功能。
[[email protected] date]# quotacheck -cug /quota
quotacheck: Cannot create new quotafile /quota/aquota.user.new: Permission denied
quotacheck: Cannot initialize IO on new quotafile: Permission denied
quotacheck: Cannot create new quotafile /quota/aquota.group.new: Permission denied
quotacheck: Cannot initialize IO on new quotafile: Permission denied
[[email protected] date]# setenforce 0 ---> 将selinux进行关闭
[[email protected] date]# quotacheck -cug /quota
[[email protected] date]# ls -ltr
total 0
[[email protected] date]# ls -ltr /quota
total 32
drwx------. 2 root root 16384 Apr 17 16:39 lost+found
-rw-------. 1 root root 6144 Apr 17 18:46 aquota.user
-rw-------. 1 root root 6144 Apr 17 18:46 aquota.group- 通过edquota -u hunter配置用户hunter对这个磁盘分区的使用配额。还可以通过edquota -g groupname 对groupname这个组设定配额
[root@localhost date]# edquota -u hunter
Disk quotas for user hunter (uid 501):
Filesystem blocks soft hard inodes soft hard
/dev/sdb5 2 10240 20480 2 5 10
Filesystem 文件系统
blocks 已经使用的块数（块的单位为1K）
soft 块数软限制，0表示禁用
hard 块数硬限制，0表示禁用
inodes 已经创建的文件个数，如果后面有*表示已经超出软限制
soft 创建的文件个数的软限制，0表示禁用
hard 创建的文件个数的硬限制，0表示禁用
edquota -p user1 user2 把user1用户的设定复制给user2用户
这里对hunter这个用对该分区磁盘的容量软限制为10M，硬限制为20M（即使该分区有50M的空间），对文件个数的软限制为5个，硬限制为10个。
下面进行测试，测试之前要给hunter这个用户对/quota目录写权限。
进入实战测试，看刚才我给hunter用户做的磁盘限额是否生效
[[email protected] date]# su - hunter #切换到hunter用户
[[email protected] ~]$ cd /quota/
[[email protected] quota]$ touch user{1..5} #创建5个空文件
[[email protected] quota]$ ls -ltr
total 32
drwx------. 2 root root 16384 Apr 17 16:39 lost+found
-rw-------. 1 root root 7168 Apr 17 19:59 aquota.user
-rw-rw-r--. 1 hunter hunter 0 Apr 17 20:06 user5
-rw-rw-r--. 1 hunter hunter 0 Apr 17 20:06 user4
-rw-rw-r--. 1 hunter hunter 0 Apr 17 20:06 user3
-rw-rw-r--. 1 hunter hunter 0 Apr 17 20:06 user2
-rw-rw-r--. 1 hunter hunter 0 Apr 17 20:06 user1
-rw-------. 1 root root 7168 Apr 17 20:06 aquota.group
[[email protected] quota]$ touch user6 #此处触发了软限制
sdb5: warning, user file quota exceeded.
[[email protected] quota]$ ls
aquota.group aquota.user lost+found use6 user1 user2 user3 user4 user5
[[email protected] quota]$ touch user{7..15} #此处真正到了硬限制
sdb5: write failed, user file limit reached.
touch: cannot touch `user11‘: Disk quota exceeded
touch: cannot touch `user12‘: Disk quota exceeded
touch: cannot touch `user13‘: Disk quota exceeded
touch: cannot touch `user14‘: Disk quota exceeded
touch: cannot touch `user15‘: Disk quota exceeded
[[email protected] quota]$ rm -rf user* #删除之后我们再来试验一下容量的限制
[[email protected] quota]$ ls -ltr
total 32
drwx------. 2 root root 16384 Apr 17 16:39 lost+found
-rw-------. 1 root root 7168 Apr 17 19:59 aquota.user
-rw-------. 1 root root 7168 Apr 17 20:06 aquota.group
[[email protected] quota]$ dd if=/dev/zero of=text.txt bs=1M count=11
sdb5: warning, user block quota exceeded. #此处已经触发了容量10M的软限制，不过还能进行写入
11+0 records in
11+0 records out
11534336 bytes (12 MB) copied, 0.373587 s, 30.9 MB/s
[email protected] quota]$ dd if=/dev/zero of=text.txt bs=1M count=21
sdb5: warning, user block quota exceeded.#此处已经触发了20M的硬限制，现已经写不进去了，看来做的对用户的磁盘限额没有问题。
sdb5: write failed, user block limit reached.
dd: writing `text.txt‘: Disk quota exceeded
21+0 records in
20+0 records out
20971520 bytes (21 MB) copied, 0.351462 s, 59.7 MB/s- 切换root用户使用repquota -a来查看当前各磁盘配额的使用情况。从下图可以看出hunter用户已经达到了磁盘使用的最大容量限制
[[email protected] date]# repquota -a
*** Report for user quotas on device /dev/sdb5
Block grace time: 7days; Inode grace time: 7days
Block limits File limits
User used soft hard grace used soft hard grace
----------------------------------------------------------------------
root -- 20 0 0 2 0 0
hunter +- 11264 10240 20480 6days 1 5 10 需要注意的是，当用户触发软限制时，grace time就会倒计时，在这个时间（默认是7天）没有耗尽之前，若用户还不清理磁盘使之符合软限制的要求，则软限制就会变成硬限制，这个时间叫宽限期。可以通过edquota -t设置这个时间，分别设置容量和文件数量的宽限期。
[[email protected] date]# edquota -t
Grace period before enforcing soft limits for users:
Time units may be: days, hours, minutes, or seconds
Filesystem Block grace period Inode grace period
/dev/sdb5 7days 7days对于LVM逻辑卷和磁盘配额还是比较重要的，请各位大神多多指教！！！
给大家推荐一个可以将EXCEL表格转化成HTML格式的在线网址：http://pressbin.com/tools/excel_to_html_table/index.html
时间： 2024-10-26 14:58:12