由于最近在学习kubernetes,etcd作为kubernetes集群的主数据库，必须先启动。
| etcds实例名称 | IP地址 | Hostname |
|---|---|---|
| etcd 1 | 192.168.142.161 | kubernetes-node1.example.com |
| etcd 2 | 192.168.142.162 | kubernetes-node2.example.com |
| etcd 3 | 192.168.142.163 | kubernetes-node3.example.com |
从GitHub官网上下载etcd发布的二进制文件，etcd和etcdctl文件复制到/usr/bin目录。
- 设置systemd服务文件。
vim /usr/lib/systemd/system/etcd.service
内容如下：
[Unit]
Description=Etcd Server
After=network.target
[Service]
Type=simple
WorkingDirectory=/var/lib/etcd/
EnvironmentFile=-/etc/etcd/etcd.conf #配置文件路径
ExecStart=/usr/bin/etcd
Type=notify
[Install]
WantedBy=multi-user.target- 编写/etc/etcd/etcd.conf文件
vim /etc/etcd/etcd.conf
# [member]
ETCD_NAME=etcd1 #etcd实例名称
ETCD_DATA_DIR="/var/lib/etcd" #etcd数据保存目录
ETCD_LISTEN_CLIENT_URLS="http://192.168.142.161:2379,http://127.0.0.1:2379"
#供外部客户端使用的url
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.142.161:2379,http://127.0.0.1:2379"
#广播给外部客户端使用的url
#[cluster]
ETCD_LISTEN_PEER_URLS="http://192.168.142.161:2380" #集群内部通信使用的URL
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://192.168.142.161:2380"
#广播给集群内其他成员访问的URL
ETCD_INITIAL_CLUSTER="etcd1=http://192.168.142.161:2380,etcd2=http://192.168.142.162:2380,etcd3=http://192.168.142.163:2380"
#初始集群成员列表
ETCD_INITIAL_CLUSTER_STATE="new"
#初始集群状态，new为新建集群
ETCD_INITIAL_CLUSTER_TOKEN="k8s-etcd-cluster" #集群的名称- 启动etcd1服务器上的etcd服务。
systemctl restart etcd
-
etcd2和etcd3为加入k8s-etcd-cluster集群的实例，需要将其ETCD_INITIAL_CLUSTER_STATE设置为"exist"。etcd2的完整配置如下：
# [member]
ETCD_NAME=etcd2
ETCD_DATA_DIR="/var/lib/etcd"
ETCD_LISTEN_CLIENT_URLS="http://192.168.142.162:2379,http://127.0.0.1:2379"
ETCD_ADVERTISE_CLIENT_URLS="http://192.168.142.162:2379,http://127.0.0.1:2379"
#[cluster]
ETCD_LISTEN_PEER_URLS="http://192.168.142.162:2380"
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://192.168.142.162:2380"
ETCD_INITIAL_CLUSTER="etcd1=http://192.168.142.161:2380,etcd2=http://192.168.142.162:2380,etcd3=http://192.168.142.163:2380"
ETCD_INITIAL_CLUSTER_STATE="exist"
ETCD_INITIAL_CLUSTER_TOKEN="k8s-etcd-cluster"- 启动etcd2和etcd3服务器上的etcd服务。
systemctl restart etcd
启动完成后，在任意节点执行etcdctl cluster-healthy命令来查看运行状态。
使用etcdctl member list 来查看集群中的成员列表。
另外一种安装方法
etcd集群搭建
下载二进制软件包
https://github.com/coreos/etcd/releases
解压
将两个执行文件复制到/usr/bin/
etcd和etcdctl文件复制到/usr/bin目录
配置etcd-1
vi /etc/etcd/etcd.yml
name: etcd-1
data-dir: /var/lib/etcd
listen-client-urls: http://163.44.167.92:2379,http://127.0.0.1:2379
advertise-client-urls: http://163.44.167.92:2379,http://127.0.0.1:2379
listen-peer-urls: http://163.44.167.92:2380
initial-advertise-peer-urls: http://163.44.167.92:2380
initial-cluster: etcd-1=http://163.44.167.92:2380,etcd-2=http://150.95.148.52:2380,etcd-3=http://133.130.122.48:2380
initial-cluster-token: etcd-cluster-token
initial-cluster-state: new
配置etcd-2
vi /etc/etcd/etcd.yml
name: etcd-2
data-dir: /var/lib/etcd
listen-client-urls: http://150.95.148.52:2379,http://127.0.0.1:2379
advertise-client-urls: http://150.95.148.52:2379,http://127.0.0.1:2379
listen-peer-urls: http://150.95.148.52:2380
initial-advertise-peer-urls: http://150.95.148.52:2380
initial-cluster: etcd-1=http://163.44.167.92:2380,etcd-2=http://150.95.148.52:2380,etcd-3=http://133.130.122.48:2380
initial-cluster-token: etcd-cluster-token
initial-cluster-state: new
配置etcd-3
name: etcd-3
data-dir: /var/lib/etcd
listen-client-urls: http://133.130.122.48:2379,http://127.0.0.1:2379
advertise-client-urls: http://133.130.122.48:2379,http://127.0.0.1:2379
listen-peer-urls: http://133.130.122.48:2380
initial-advertise-peer-urls: http://133.130.122.48:2380
initial-cluster: etcd-1=http://163.44.167.92:2380,etcd-2=http://150.95.148.52:2380,etcd-3=http://133.130.122.48:2380
initial-cluster-token: etcd-cluster-token
initial-cluster-state: new
最后启动
etcd --config-file=/etc/etcd/etcd.yml &
查看成员
etcdctl member list
每个节点上执行查看健康状态
etcdctl cluster-health
原文地址：https://www.cnblogs.com/skymyyang/p/9067280.html
时间： 2024-11-14 12:57:15