一、安装准备 1.1平台环境:
- CentOS 5.4 x86_64 GNU/Linux
- nginx-0.8.21
- php-5.2.9
- spawn-fcgi-1.6.3
- mysql-5.1.34
.2系统安装及分区:
1.2.1操作系统安装:
安装过程中选择最少的包,采用文本模式安装,不安装图形。
1.2.3系统分区:
/boot 100M (大约100左右)
SWAP 4G 物理内存的2倍(如果你的物理内存大于4G,分配4G即可)
/ 50G
/data 剩余所有空间.
注:具体分区请根据相关业务划分
1.2.4系统软件包安装规范
系统约定:
软件源代码包存放位置 /usr/local/src
源码包编译安装位置(prefix) /usr/local/software_name
脚本以及维护程序存放位置 /usr/local/sbin
MySQL 数据库位置 /data/mysql/data(可按情况设置)
网站根目录 /data/www/wwwroot(可按情况设置)
虚拟主机日志根目录 /data/logs(可按情况设置)
Nginx运行账户 www:www
install_software_name.sh //存放编译参数脚本习惯将所有编译脚本存放在install_software_name.sh便于升级和更新软件.
1.3.系统初始化
#vi init_network.sh
#welcome cat << EOF +--------------------------------------------------------------+ | === Welcome to Centos System init === | +--------------------------------------------------------------+ +----------------------Author:NetSeek--------------------------+ EOF #disable ipv6 cat << EOF +--------------------------------------------------------------+ | === Welcome to Disable IPV6 === | +--------------------------------------------------------------+ EOF echo "alias net-pf-10 off" >> /etc/modprobe.conf echo "alias ipv6 off" >> /etc/modprobe.conf /sbin/chkconfig --level 35 ip6tables off echo "ipv6 is disabled!" #disable selinux sed -i ‘/SELINUX/s/enforcing/disabled/‘ /etc/selinux/config echo "selinux is disabled,you must reboot!" #vim sed -i "8 s/^/alias vi=‘vim‘/" /root/.bashrc echo ‘syntax on‘ > /root/.vimrc #zh_cn sed -i -e ‘s/^LANG=.*/LANG="en"/‘ /etc/sysconfig/i18n #init_ssh ssh_cf="/etc/ssh/sshd_config" sed -i -e ‘74 s/^/#/‘ -i -e ‘76 s/^/#/‘ $ssh_cf sed -i "s/#UseDNS yes/UseDNS no/" $ssh_cf #client sed -i -e ‘44 s/^/#/‘ -i -e ‘48 s/^/#/‘ $ssh_cf echo "ssh is init is ok.............." #chkser #tunoff services #-------------------------------------------------------------------------------- cat << EOF +--------------------------------------------------------------+ | === Welcome to Tunoff services === | +--------------------------------------------------------------+ EOF #--------------------------------------------------------------------------------- for i in `ls /etc/rc3.d/S*` do CURSRV=`echo $i|cut -c 15-` echo $CURSRV case $CURSRV in crond | irqbalance | microcode_ctl | network | random | sendmail | sshd | syslog | local | mysqld ) echo "Base services, Skip!" ;; *) echo "change $CURSRV to off" chkconfig --level 235 $CURSRV off service $CURSRV stop ;; esac done
1.4 系统环境部署及调整
检查系统是否正常
# tail -n100 /var/log/messages (检查有无系统级错误信息)
# dmesg (检查硬件设备是否有错误信息)
# ifconfig (检查网卡设置是否正确)
# ping www.cqseo.org (检查网络是否正常)
1.5使用 yum 程序安装所需开发包
1.5.1 更换快源
#cd /etc/yum.repos.d/
#mv CentOS-Base.repo CentOS-Base.repo.linuxtone
#wget http://docs.linuxtone.org/soft/lemp/CentOS-Base.repo
1.5.2 yum安装相关软件包:
#yum -y install ntp vim-enhanced gcc gcc-c++ gcc-g77 flex bison autoconf automake glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel libtool* zlib-devel libxml2-devel libjpeg-devel libpng-devel libtiff-devel fontconfig-devel freetype-devel libXpm-devel gettext-devel curl curl-devel pam-devel e2fsprogs-devel krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers
1.6 定时校正服务器时钟,定时与中国国家授时中心授时服务器同步
# crontab -e
加入一行: 15 3 * * * /usr/sbin/ntpdate 210.72.145.44 > /dev/null 2>&1
1.7下载相关软件包
#cd /usr/local/src
#vi list_tar.list
http://docs.linuxtone.org/soft/lemp/ImageMagick.tar.gz
http://docs.linuxtone.org/soft/lemp/PDO_MYSQL-1.0.2.tgz
http://docs.linuxtone.org/soft/lemp/eaccelerator-0.9.5.3.tar.bz2
http://docs.linuxtone.org/soft/lemp/imagick-2.2.2.tgz
http://docs.linuxtone.org/soft/lemp/libiconv-1.13.tar.gz
http://docs.linuxtone.org/soft/lemp/libmcrypt-2.5.8.tar.gz
http://docs.linuxtone.org/soft/lemp/mcrypt-2.6.8.tar.gz
http://docs.linuxtone.org/soft/lemp/memcache-2.2.5.tgz
http://docs.linuxtone.org/soft/lemp/mhash-0.9.9.9.tar.gz
http://docs.linuxtone.org/soft/lemp/mysql-5.1.34.tar.gz
http://docs.linuxtone.org/soft/lemp/pcre-7.8.tar.gz
http://www.lighttpd.net/download/spawn-fcgi-1.6.3.tar.gz
http://docs.linuxtone.org/soft/lemp/php-5.2.9.tar.bz2
http://sysoev.ru/nginx/nginx-0.8.21.tar.gz
http://docs.linuxtone.org/soft/lemp/ZendOptimizer-3.3.3-linux-glibc23-x86_64.tar.gz
#wget -i list_tar.list
1.8.添加nginx 运维账户:
#vi add_webuser.sh
/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
mkdir -p /data/www/wwwroot
chmod +w /data/www/wwwroot
chown www:www /data/www/wwwroot -R
#sh add_webuser.sh
二.编译安装
2.1 编译安装pcre
#tar zxvf pcre-7.8.tar.gz
#cd pcre-7.8
#./configure && make && make install
2.2 编译安装nginx
#tar zxvf nginx-0.8.21.tar.gz
#cd nginx-0.8.21
2.2.1 附加:修改nginx源代码,伪装nginx服务器(仅供参考,安全还得认真做起^.^):
(1).修改gcc
#vi auto/cc/gcc
NGX_GCC_OPT="-O"
NGX_GCC_OPT="-O3"
(2).修改nginx.h
#vi nginx-0.8.21/src/core/nginx.h
#define NGINX_VERSION "0.7.58"
#define NGINX_VER "nginx/" NGINX_VERSION
修改为:
#define NGINX_VERSION "1.0"
#define NGINX_VER "LTWS/" NGINX_VERSION
(3).修改nginx_http_header_filter_module
#vi nginx-0.8.21/src/http/ngx_http_header_filter_module.c
static char ngx_http_server_string[] = "Server: nginx" CRLF;
修改为:
static char ngx_http_server_string[] = "Server: LTWS" CRLF;
(4).修改ngx_http_special_response.c
#vi nginx-0.8.21/src/http/ngx_http_special_response.c
将如下
static u_char ngx_http_error_full_tail[] =
"<hr><center>" NGINX_VER "</center>" CRLF
"</body>" CRLF
"</html>" CRLF
;
static u_char ngx_http_error_tail[] =
"<hr><center>nginx</center>" CRLF
"</body>" CRLF
"</html>" CRLF
;
static u_char ngx_http_error_full_tail[] =
"<hr><center> "NGINX_VER" </center>" CRLF
"<hr><center>http://www.linuxtone.com</center>" CRLF
"</body>" CRLF
"</html>" CRLF
;
static u_char ngx_http_error_tail[] =
"<hr><center>HMGWS</center>" CRLF
"</body>" CRLF
"</html>" CRLF
;
2.2.2 nginx 编译安装
./configure \
"--user=www" \
"--group=www" \
"--prefix=/usr/local/nginx/" \
"--with-http_stub_status_module" \
"--with-http_ssl_module" \
"--with-md5=/usr/lib" \
"--with-sha1=/usr/lib"
make
make install
2.3 编译安装配置mysql
./configure "--prefix=/usr/local/mysql" "--localstatedir=/data/mysql/data" "--with-comment=Source" "--with-server-suffix=-Linuxtone.Org" "--enable-assembler" "--with-charset=utf8" "--with-collation=utf8_chinese_ci" "--with-collation=utf8_chinese_ci" "--with-extra-charsets=complex" "--enable-thread-safe-client" "--with-big-tables" "--with-readline" "--with-ssl" "--with-embedded-server" "--enable-local-infile" "--with-plugins=innobase" make make install useradd mysql -d /data/mysql -s /sbin/nologin /usr/local/mysql/bin/mysql_install_db --user=mysql cd /usr/local/mysql chown -R root:mysql . mkdir -p /data/mysql/data chown -R mysql /data/mysql/data cp share/mysql/my-huge.cnf /etc/my.cnf.bak wget http://www.caifw.com/api/my.cnf sed -i ‘50 s/^/#/‘ /etc/my.cnf cp share/mysql/mysql.server /etc/rc.d/init.d/mysqld chmod 755 /etc/rc.d/init.d/mysqld chkconfig --add mysqld /etc/rc.d/init.d/mysqld start cd /usr/local/mysql/bin for i in *; do ln -s /usr/local/mysql/bin/$i /usr/bin/$i; done
2.4 编译安装php
2.4.1安装php相应的lib
2.4.1.1 libiconv-1.13
#tar zxvf libiconv-1.13.tar.gz #cd libiconv-1.13 #./configure --prefix=/usr && make && make install
2.4.1.2 libmcrypt-2.5.8
#tar zxvf libmcrypt-2.5.8.tar.gz #cd libmcrypt-2.5.8/ #./configure --prefix=/usr && make && make install #echo "/usr/lib" >> /etc/ld.so.conf #ldconfig #cd libltdl/ #./configure --enable-ltdl-install #make && make install
2.4.1.3 mhash-0.9.9.9
#tar zxvf mhash-0.9.9.9.tar.gz #cd mhash-0.9.9.9 #./configure --prefix=/usr && make && make install #ldconfig
2.4.1.4 mcrypt-2.6.8
#tar zxvf mcrypt-2.6.8.tar.gz #cd mcrypt-2.6.8 #./configure --prefix=/usr && make&& make install
2.4.2 安装spawn-fcgi
#tar zvxf spawn-fcgi-1.6.3.tar.gz #cd spawn-fcgi-1.6.3 #./configure && make && make install
2.4.3 安装php
#tar jvxf php-5.2.9.tar.bz2 #vi install_php.sh ./configure "--prefix=/usr/local/php" "--enable-fastcgi" "--enable-fpm" "--enable-discard-path" "--enable-force-cgi-redirect" "--with-config-file-path=/usr/local/php/etc" "--with-mysql=/usr/local/mysql" "--with-mysqli=/usr/local/mysql/bin/mysql_config" "--with-iconv-dir" "--with-freetype-dir" "--with-jpeg-dir" "--with-png-dir" "--with-gd" "--with-zlib" "--with-libxml-dir" "--with-curl" "--with-curlwrappers" "--with-openssl" "--with-mhash" "--with-xmlrpc" "--with-mcrypt" "--with-ldap" "--with-ldap-sasl" "--enable-xml" "--disable-rpath" "--enable-discard-path" "--enable-safe-mode" "--enable-bcmath" "--enable-shmop" "--enable-sysvsem" "--enable-inline-optimization" "--enable-mbregex" "--enable-mbstring" "--enable-gd-native-ttf" "--enable-ftp" "--enable-pcntl" "--enable-sockets" "--enable-zip" "--disable-debug" "--disable-ipv6" make ZEND_EXTRA_LIBS=‘-liconv‘ make install cp php.ini-dist /usr/local/php/etc/php.ini
#sh install_php.sh
2.4.4安装PHP扩展模块
2.4.4.1 memcache-2.2.5
#tar zvxf memcache-2.2.5.tgz #cd memcache-2.2.5 #/usr/local/php/bin/phpize #./configure --with-php-config=/usr/local/php/bin/php-config #make && make install
2.4.4.2 eaccelerator-0.9.5.3
#tar jvxf eaccelerator-0.9.5.3.tar.bz2 #cd eaccelerator-0.9.5.3 #/usr/local/php/bin/phpize #./configure --enable-eaccelerator=shared --with-php-config=/usr/local/php/bin/php-config #make && make install
2.4.4.3 PDO_MYSQL-1.0.2
#tar zxvf PDO_MYSQL-1.0.2.tgz #cd PDO_MYSQL-1.0.2 #/usr/local/php/bin/phpize #./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/local/mysql #make && make install
2.4.4.4 ImageMagick
#tar zxvf ImageMagick.tar.gz #cd ImageMagick-6.5.1-2/ #./configure --enable-shared --with-modules --without-x --with-gs-font-dir=default --with-perl=yes --with-xml=yes --with-zlib=yes --with-jpeg=yes # make && make install
2.4.4.5 imagick-2.2.2
#tar zxvf imagick-2.2.2.tgz #cd imagick-2.2.2/ #/usr/local/php/bin/phpize #./configure --with-php-config=/usr/local/php/bin/php-config #make #make install
2.4.5脚本配置php.ini
# vi init_php.sh
#!/bin/bash fcgi_cf="/usr/local/php/etc/php.ini" ea(){ cat << EOF [eAccelerator] zend_extension="/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so" eaccelerator.shm_size="32" eaccelerator.cache_dir="/data/cache/ea" eaccelerator.enable="1" eaccelerator.optimizer="1" eaccelerator.check_mtime="1" eaccelerator.debug="0" eaccelerator.filter="" eaccelerator.shm_max="0" eaccelerator.shm_ttl="0" eaccelerator.shm_prune_period="0" eaccelerator.shm_only="0" eaccelerator.compress="1" eaccelerator.compress_level="9" EOF } #mkdir mkdir -p /data/cache/ea ea >> $fcgi_cf #config for php.ini sed -i ‘205 s#;open_basedir =#open_basedir = /data/www/wwwroot:/tmp#g‘ $fcgi_cf sed -i ‘210 s#disable_functions =#;disable_functions = phpinfo,passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_alter,ini_restore,dl,pfsockopen,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server#g‘ $fcgi_cf sed -i ‘/expose_php/s/On/Off/‘ $fcgi_cf sed -i ‘/display_errors/s/On/Off/‘ $fcgi_cf sed -i ‘s#extension_dir = "./"#extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#‘ $fcgi_cf sed -i ‘s#output_buffering = Off#output_buffering = On#‘ $fcgi_cf
2.5安装Zend
#tar zvxf ZendOptimizer-3.3.3-linux-glibc23-x86_64.tar.gz # cd ZendOptimizer-3.3.3-linux-glibc23-x86_64 # ./install
注:php.ini的位置为/usr/local/php/etc 服务器不选用apache
三、配置整合
3.1 配置nginx
注:本文spawn-fcgi开启9000跟9001两个端口,利用nginx的upstream负载均衡php程序到不同的fcgi端口上面,解决502 gateway错误
#cd /usr/local/nginx/conf
#cp nginx.conf nginx.conf.linuxtone
#vi nginx.conf
user www www; worker_processes 10; pid /var/run/nginx.pid; # [ debug | info | notice | warn | error | crit ] error_log /dev/null; #error_log /data/logs/nginxerror.log; #Specifies the value for maximum file descriptors that can be opened by this process. worker_rlimit_nofile 51200; events { use epoll; #maxclient = worker_processes * worker_connections / cpu_number worker_connections 51200; } http { include /usr/local/nginx/conf/mime.types; default_type application/octet-stream; #charset gb2312; charset utf8; log_format main ‘$remote_addr - $remote_user [$time_local] $request ‘ ‘"$status" $body_bytes_sent "$http_referer" ‘ ‘"$http_user_agent" "$http_x_forwarded_for"‘; #access_log /data/www/logs/access.log main; access_log /dev/null; #General Options server_names_hash_bucket_size 128; client_header_buffer_size 32k; large_client_header_buffers 4 32k; ignore_invalid_headers on; recursive_error_pages on; server_name_in_redirect off; sendfile on; #timeouts keepalive_timeout 60; #TCP Options tcp_nopush on; tcp_nodelay on; #fastcgi options fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; fastcgi_buffer_size 128k; fastcgi_buffers 4 128k; fastcgi_busy_buffers_size 128k; fastcgi_temp_file_write_size 128k; fastcgi_intercept_errors on; ssi on; ssi_silent_errors on; ssi_types text/shtml; #size limits client_max_body_size 50m; client_body_buffer_size 256k; #gzip compression gzip on; gzip_min_length 0; gzip_buffers 16 8k; gzip_http_version 1.0; gzip_comp_level 9; gzip_types text/plain text/css image/x-icon image/png; gzip_vary on; #temp files proxy_temp_path /dev/shm/proxy_temp; fastcgi_temp_path /dev/shm/fastcgi_temp; client_body_temp_path /dev/shm/client_body_temp; #client_body_temp_path /usr/local/nginx/client_body_temp 1 2; #proxy_temp_path /usr/local/nginx/proxy_temp 1 2; #fastcgi_temp_path /usr/local/nginx/fastcgi_temp 1 2; #upstream upstream spawn { # ip_hash; server 127.0.0.1:9000 max_fails=0 fail_timeout=30s; server 127.0.0.1:9001 max_fails=0 fail_timeout=30s; } # The following includes are specified for virtual hosts #www.linuxtone.org include /usr/local/nginx/conf/vhosts/www.linuxtone.org.conf; }
#mkdir vhosts
#vi vhosts/www.linuxtone.org.conf
server { listen 80; server_name www.linuxtone.org .linuxtone.org; index index.html index.htm index.php; root /data/www/wwwroot/linuxtone; error_page 404 http://www.linuxtone.org; #rewrite ^/bbs/(.*) http://bbs.linuxtone.org/$1; location ~ .*\.php?$ { fastcgi_pass spawn; include /usr/local/nginx/conf/spawn_php5.conf; fastcgi_index index.php; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { access_log off; expires 1d; break; } } }
#vi /usr/local/nginx/conf/spawn_php5.conf
fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect #fastcgi_param REDIRECT_STATUS 200;
3.2 配置spawn-fcgi启动脚本
#mkdir /usr/local/php/sbin
# vi /usr/local/php/sbin/spawn-fcgi
#! /bin/sh set -e PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin DESC="spawn-fcgi daemon" NAME=spawn-fcgi DAEMON=/usr/local/bin/$NAME # Gracefully exit if the package has been removed. test -x $DAEMON || exit 0 d_start() { $DAEMON -a 127.0.0.1 -p 9000 -C 128 -u www -g www -f /usr/local/php/bin/php-cgi > /dev/null 2>&1 $DAEMON -a 127.0.0.1 -p 9001 -C 128 -u www -g www -f /usr/local/php/bin/php-cgi > /dev/null 2>&1 || echo -n " already running" } d_stop() { /usr/bin/killall -9 php-cgi > /dev/null 2>&1 || echo -n " not running" } case "$1" in start) echo -n "Starting $DESC: $NAME" d_start echo "." ;; stop) echo -n "Stopping $DESC: $NAME" d_stop echo "." ;; restart) echo -n "Restarting $DESC: $NAME" d_stop sleep 1 d_start echo "." ;; *) echo "Usage: $SCRIPTNAME {start|stop|restart}" >&2 exit 3 ;; esac exit 0
#chmod 755 /usr/local/php/sbin/spawn-fcgi
四、启动WEB服务
4.1.启动spawn-fcgi
#/usr/local/php/sbin/spawn-fcgi start
4.2.启动nginx
4.2.1检查nginx配置:
# /usr/local/nginx/sbin/nginx ?t //返回如下信息说明配置正确
the configuration file /usr/local/nginx//conf/nginx.conf syntax is ok configuration file /usr/local/nginx//conf/nginx.conf test is successful
#/usr/local/nginx/sbin/nginx //启动nginx
4.3.加入开机启动
#vi /etc/rc.local
在最后加入:
ulimit -SHn 51200 /usr/local/nginx/sbin/nginx /usr/local/php/sbin/spawn-fcgi start
五、测试
#mkdir /data/www/wwwroot/linuxtone
#vi phpinfo.php
<?php Phpinfo(); ?>
打开浏览器输入:http://www.linuxtone.org/phpinfo.php
即可查看当前配置环境. 查看完成后出于安全考虑请再将此函数禁掉.
(文章来自:http://www.cnblogs.com/ado-geek/archive/2012/05/31/2528098.html)
基于CentOS 5.4搭建nginx+php+spawn-fcgi+mysql高性能php平台,布布扣,bubuko.com