本人用的BLE是TIcc2541，1.3.2协议栈
1、首先要说明的是，iphone手机将信息保护了，BLE设备读到的iphone地址是随机的，每次连接都会不同
2、下面我就具体说明如何查看手机的mac地址
首先我的程序是作为从机的，从机配好开始广播，事件SBP_START_DEVICE_EVT ---> GAPRole_StartDevice( &simpleBLEPeripheral_PeripheralCBs );
然后进入peripheral.c中的GAPRole_ProcessEvent函数（关于回调函数我就不提了），
由事件SYS_EVENT_MSG --->gapRole_ProcessOSALMsg( (osal_event_hdr_t *)pMsg );
---> GAP_MSG_EVENT ---> gapRole_ProcessGAPMsg( (gapEventHdr_t *)pMsg );
---> GAP_LINK_ESTABLISHED_EVENT --->
#define GAP_LINK_ESTABLISHED_EVENT 0x05
//!< Sent when the Establish Link Request is complete. This event is sent as an OSAL message defined as gapEstLinkReqEvent_t.
uint8 devAddr[B_ADDR_LEN]; //!< Device address of link
typedef struct
{
osal_event_hdr_t hdr; //!< GAP_MSG_EVENT and status
uint8 opcode; //!< GAP_LINK_ESTABLISHED_EVENT
uint8 devAddrType; //!< Device address type: @ref GAP_ADDR_TYPE_DEFINES
uint8 devAddr[B_ADDR_LEN]; //!< Device address of link
uint16 connectionHandle; //!< Connection Handle from controller used to ref the device
uint16 connInterval; //!< Connection Interval
uint16 connLatency; //!< Conenction Latency
uint16 connTimeout; //!< Connection Timeout
uint8 clockAccuracy; //!< Clock Accuracy
} gapEstLinkReqEvent_t;
gapEstLinkReqEvent_t *pPkt = (gapEstLinkReqEvent_t *)pMsg;
DEBUG_PRINT("address: %s(%d)\r\n", bdAddr2Str(pPkt->devAddr), __LINE__);
此时address就是你手机蓝牙的mac地址了，安卓和ios都可以，亲测
欢迎交流，如有转载请注明出处
新浪博客：http://blog.sina.com.cn/u/2049150530
博客园：http://www.cnblogs.com/sky-heaven/
知乎：http://www.zhihu.com/people/zhang-bing-hua