5.1 Centos环境准备
|
Hostname |
IP |
flating ip |
func |
|
|
Lxp-node1 |
192.168.11.10 |
10.33.41.135 |
Controller+network |
|
|
Lxp-node2 |
192.168.11.11 |
10.33.41.136 |
Compute+storage |
|
|
Lxp-node3 |
192.168.11.12 |
10.33.41.139 |
Compute+storage |
/etc/hostname都要改
/etc/hosts增加：
192.168.11.10 lxp-node1
192.168.11.11 lxp-node2
192.168.11.12 lxp-node3
10.1.14.235 mirrors.hikvision.com.cn
将网卡配置成开机启动:
/etc/sysconfig/network-scripts/ifcfg-eth0中，将ONBOOT=no改为yes
配置yum 源，配置为公司内部的yum源，安装会很快
5.2 使用packstack部署三节点openstack环境
在三个节点安装packstack：
yum install openstack-packstack -y
生成answer-file：
# packstack --gen-answer-file=hcloud.txt
修改hcloud.txt中的如下配置：
（1）修改计算节点和网络节点IP
[[email protected] ~]# grep HOST ./hcloud.txt
CONFIG_CONTROLLER_HOST=192.168.11.10
CONFIG_COMPUTE_HOSTS=192.168.11.10 改为：CONFIG_COMPUTE_HOSTS=192.168.11.11,192.168.11.12
CONFIG_NETWORK_HOSTS=192.168.11.10
CONFIG_VCENTER_HOST=
CONFIG_STORAGE_HOST=192.168.11.10改为：CONFIG_STORAGE_HOST=192.168.11.11,192.168.11.12
CONFIG_SAHARA_HOST=192.168.11.10
CONFIG_AMQP_HOST=192.168.11.10
CONFIG_MARIADB_HOST=192.168.11.10
（2）不安装cirros镜像
另外将CONFIG_PROVISION_DEMO=y改为n
部署之前再检查一下/etc/hostname和/etc/hosts:
节点1：
[[email protected] ~]# cat /etc/hostname
lxp-node1
[[email protected] ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.11.10 lxp-node1
192.168.11.11 lxp-node2
192.168.11.12 lxp-node3
10.1.14.235 mirrors.hikvision.com.cn
节点2：
[[email protected] ~]# cat /etc/hostname
lxp-node2
[[email protected] ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.11.10 lxp-node1
192.168.11.11 lxp-node2
192.168.11.12 lxp-node3
10.1.14.235 mirrors.hikvision.com.cn
节点3：
[[email protected] ~]# cat /etc/hostname
lxp-node3
[[email protected] ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.11.10 lxp-node1
192.168.11.11 lxp-node2
192.168.11.12 lxp-node3
10.1.14.235 mirrors.hikvision.com.cn
再次检查hcloud.txt：
[[email protected] ~]# grep HOST ./hcloud.txt
CONFIG_CONTROLLER_HOST=192.168.11.10
CONFIG_COMPUTE_HOSTS=192.168.11.11,192.168.11.12
CONFIG_NETWORK_HOSTS=192.168.11.10
CONFIG_VCENTER_HOST=
CONFIG_STORAGE_HOST=192.168.11.11,192.168.11.12
CONFIG_SAHARA_HOST=192.168.11.10
还有如下选项：
[[email protected] ~]# grep CONFIG_PROVISION_DEMO ./hcloud.txt
CONFIG_PROVISION_DEMO=n
开始部署，只在控制节点执行即可：
# yum install screen
# screen packstack--answer-file=hcloud.txt
Welcome to the Packstack setup utility
The installation log file is available at:/var/tmp/packstack/20160509-021808-zfHLVi/openstack-setup.log
Installing:
Clean Up [DONE ]
Discovering ip protocol version [ DONE ]
这里需要手动输入三台节点的密码，接下来一直等待直到部署完成：
[email protected]‘spassword:
[email protected]‘spassword:
[email protected]‘spassword:
Setting up ssh keys [ DONE ]
部署成功后，出现如下信息：
**** Installation completed successfully******
Additional information:
*Time synchronization installation was skipped. Please note that unsynchronizedtime on server instances might be problem for some OpenStack components.
*Warning: NetworkManager is active on 192.168.11.11, 192.168.11.10,192.168.11.12. OpenStack networking currently does not work on systems thathave the Network Manager service enabled.
*File /root/keystonerc_admin has been created on OpenStack client host192.168.11.10. To use the command line tools you need to source the file.
* Toaccess the OpenStack Dashboard browse to http://192.168.11.10/dashboard .
Please, find your login credentials storedin the keystonerc_admin in your home directory.
* Touse Nagios, browse to http://192.168.11.10/nagios username: nagiosadmin,password: 60d5a77204514174
*The installation log file is available at:/var/tmp/packstack/20160509-021808-zfHLVi/openstack-setup.log
*The generated manifests are available at:/var/tmp/packstack/20160509-021808-zfHLVi/manifests
[screen is terminating]
5.3 基本服务检查
[[email protected] ~(keystone_admin)]# cinder service-list
+------------------+---------------+------+---------+-------+----------------------------+-----------------+
| Binary | Host | Zone | Status | State | Updated_at | Disabled Reason |
+------------------+---------------+------+---------+-------+----------------------------+-----------------+
| cinder-backup | lxp-node1 | nova | enabled | up | 2016-05-09T06:44:30.000000 | - |
| cinder-scheduler | lxp-node1 | nova | enabled | up | 2016-05-09T06:44:27.000000 | - |
| cinder-volume | [email protected] | nova | enabled| up | 2016-05-09T06:44:27.000000 | - |
+------------------+---------------+------+---------+-------+----------------------------+-----------------+
[[email protected] ~(keystone_admin)]#
[[email protected] ~(keystone_admin)]# nova service-list
+----+------------------+-----------+----------+---------+-------+----------------------------+-----------------+
| Id | Binary | Host | Zone | Status | State | Updated_at | Disabled Reason |
+----+------------------+-----------+----------+---------+-------+----------------------------+-----------------+
| 1 | nova-consoleauth | lxp-node1 | internal | enabled | up | 2016-05-09T06:44:42.000000 | - |
| 2 | nova-scheduler | lxp-node1 |internal | enabled | up | 2016-05-09T06:44:44.000000| - |
| 3 | nova-conductor | lxp-node1 |internal | enabled | up |2016-05-09T06:44:36.000000 | - |
| 5 | nova-cert | lxp-node1 |internal | enabled | up |2016-05-09T06:44:43.000000 | - |
| 6 | nova-compute | lxp-node3 | nova | enabled | up | 2016-05-09T06:44:38.000000 | - |
| 7 | nova-compute | lxp-node2 | nova | enabled | up | 2016-05-09T06:44:45.000000 | - |
+----+------------------+-----------+----------+---------+-------+----------------------------+-----------------+
[[email protected] ~(keystone_admin)]#
这里cinder-volume还是安装到了lxp-node1，即控制节点上
这里可能是packstack的bug，不过关系不大，cinder-volume大不了手动部署一下
接下来尝试下四个节点的安装