Solaris 10 改ip參考文档之二

參考自：Cannot change IP address of Solaris[TM] 10 host (Doc ID 1007942.1)

本文不做翻译。全文转载。

Symptoms

Changing the IP address in /etc/hosts (linked to /etc/inet/hosts) and rebooting does not change the primary interface‘s address.

Resolution

Change the entry for the host in /etc/inet/ipnodes.

Additional Information

Prior to Solaris[TM] 10, IPv6 was not enabled by default. So there would only be entries in /etc/inet/ipnodes for any systems you may want to use IPv6 with.

The host itself is only (by default) in /etc/inet/hosts.  Therefore changes to /etc/inet/hosts would be effective on the next reboot.
Starting in Solaris 10, the host has entries in both /etc/inet/hosts and /etc/inet/ipnodes.  Both files should be kept in sync; however, if they do not match, ipnodes has precedence.  If ipnodes has the old IP address, changes in /etc/inet/hosts will appear not to have any effect.

Product

Solaris 10 Operating System

时间： 2024-10-11 00:32:08

Solaris 10 改ip參考文档之二的相关文章

Solaris 10 改ip参考文档之二

参考自:Cannot change IP address of Solaris[TM] 10 host (Doc ID 1007942.1) 本文不做翻译,全文转载. Symptoms Changing the IP address in /etc/hosts (linked to /etc/inet/hosts) and rebooting does not change the primary interface's address. Resolution Change the entry

Solaris 10 改ip参考文档之一

How to Change hostname and/or IP Address Without Running sys-unconfig - Solaris 10 and below [Video] (Doc ID 1005908.1) 本文不做翻译,全文转载: Applies to: Solaris SPARC Operating System - Version 8.0 to 10 1/13 U11 [Release 8.0 to 10.0] All Platforms Note, thi

在VirtualBox上安装Solaris 10全教程（包括下载）

您可以在博文的最下方留下评价, 也可以点击左边的关注来关注我的博客的最新动态. 如果文章内容对您有帮助, 不要忘记点击右下角的推荐来支持一下喔如果您对博文有任何疑问, 可以通过评论或发邮件的方式联系我: [email protected] 如需转载,请注明出处,谢谢合作!! 本篇随笔将详细讲解Solaris 10的下载和在VirtualBox上安装的全过程. 一.Solaris 10镜像下载最近发现呀,这个Solaris 10的iso镜像是越来越难下载了,其实自从SUN公司给Orac

通过网络给sparc环境安装solaris 10 操作系统

一. 环境介绍 1. 目的在没有光驱的情况下客户端服务器进行solaris10 1/13系统重装 2. 基础环境安装服务器:SUN M8000, 已安装Oracle Solaris 10 1/13, ixgbe0 ip:192.168.0.101 e1000g1 ip:192.168.9.10 客户端:SUN M8000,无光驱, ixgbe0 ip:192.168.0.100 e1000g1 ip:192.168.9.11 联网方式:两台主机的千兆口直连,万兆口

Install Orace 11g on Solaris 10 Sparc 64 bit

昨天去一客户那里安装11g数据库,把整个安装过程和遇到的一些问题做个记录,分享一下.由于该客户无法用自己的机器远程连接到服务器,也不允许通过U盘.移动硬盘等拷贝任何文件,因此一些记录内容无法做到很详尽,只能凭记忆大致写出. 主机:SUN Netra T4-1 M4000 CPU:8 core 2.85GHz 内存:32G 系统:Solaris 10 一.检查硬件要求 --查看内存 # /usr/sbin/prtconf | grep "Memory size" Memory size:

kubeadm安装Kubernetes V1.10集群详细文档

1:服务器信息以及节点介绍系统信息:centos1708 minimal 只修改IP地址主机名称 IP 备注 node01 192.168.150.181 master and etcd rode02 192.168.150.182 master and etcd node03 192.168.150.183 master and etcd node04 192.168.150.184 node VIP 192.168.150.186 软件版本: docker17.03.2-ce so

在Solaris 10 sparc下安装oracle database 10gR2需要打的os package和os patch

参考自: Oracle Database (RDBMS) on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) (文档 ID 169706.1) Required Packages: SUNWarc, SUNWbtool, SUNWhea, SUNWlibm,

在VMware上面安装Solaris 10

在VMware上面安装Solaris 10 导读 Oracle Solaris 11 是世界上最先进的企业操作系统,提供安全.速度.简单的企业云环境和DevOps.在这篇文章中我们将使用Solaris 10版本,但您可以按照同样的步骤,来安装刚刚发布的 Solaris 11最新版本. 我们按照以下步骤在VMware workstation 12上面完成安装Solaris. 1. 开机打开VMware工作站在你的主页,选择您创建的虚拟机Solaris 10,并点击按钮如下所示. 2. 启动菜单

运行oracle 的aix、linux主机改ip规范

/etc/hosts里要改对linux :/etc/sysconfig/network-scripts/ifcfg-ethX要改, 对aix: smitty tcpip ->Mininum Configuration & Startup->Available Network Interfaces oracle的listener.ora文件要改,若是里边配置的是ip地址. oracle的sqlnet.ora文件要改:特别关注有无限制ip地址段的那一行. 对rac而言,还需要修改ocr中