1.tcpdump；
nginx开启后会占用80端口，此时执行命令：tcpdump tcp port 80
结果如下：
[[email protected] ~]$ sudo tcpdump tcp port 80 [sudo] password for syswj: tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on Auto_eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
采用tcpdump抓到大包会显示到屏幕上：
1.在windows上通过telnet ip 端口号 来连接linux上80端口运行的nginx服务器
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on Auto_eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 14:14:23.406697 IP 192.168.137.1.7352 > 192.168.137.128.http: Flags [S], seq 322176964, win 8192, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0 14:14:23.406740 IP 192.168.137.128.http > 192.168.137.1.7352: Flags [S.], seq 300095102, ack 322176965, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 6], length 0 14:14:23.406992 IP 192.168.137.1.7352 > 192.168.137.128.http: Flags [.], ack 1, win 256, length 0
这就是tcp的3次握手经过
2.退出windows上的telnet后：
14:16:37.910069 IP 192.168.137.1.7360 > 192.168.137.128.http: Flags [F.], seq 1, ack 1, win 256, length 0 14:16:37.910194 IP 192.168.137.128.http > 192.168.137.1.7360: Flags [F.], seq 1, ack 2, win 229, length 0 14:16:37.910854 IP 192.168.137.1.7360 > 192.168.137.128.http: Flags [.], ack 2, win 256, length 0
客户端跟服务器发送一个FIN结束报文，服务器收到后，
3.在网页上(windows)进入http:192.168.137.128
进入的时候：
[sudo] password for syswj: tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on Auto_eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 14:23:09.504575 IP 192.168.137.1.rtps-dd-mt > 192.168.137.128.http: Flags [S], seq 4063271087, win 65535, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0 14:23:09.504610 IP 192.168.137.128.http > 192.168.137.1.rtps-dd-mt: Flags [S.], seq 1526809447, ack 4063271088, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 6], length 0 14:23:09.504867 IP 192.168.137.1.rtps-dd-mt > 192.168.137.128.http: Flags [.], ack 1, win 1024, length 0
也是和上面一样的3次握手
关闭页面，等待一段时间后：
14:24:09.565990 IP 192.168.137.128.http > 192.168.137.1.rtps-dd-mt: Flags [F.], seq 1, ack 1, win 229, length 0 14:24:09.566290 IP 192.168.137.1.rtps-dd-mt > 192.168.137.128.http: Flags [.], ack 2, win 1024, length 0
再等待一段时间后：
14:25:32.242143 IP 192.168.137.1.rtps-dd-mt > 192.168.137.128.http: Flags [F.], seq 1, ack 2, win 1024, length 0 14:25:32.242248 IP 192.168.137.128.http > 192.168.137.1.rtps-dd-mt: Flags [R], seq 1526809449, win 0, length 0
--因为超时的原因服务器已经关闭了这个连接，此时客户端再向服务器发送信息，服务器根本不识别这个客户端，所以返回一个RST报文
关于端口的一些命令：
lsof -i :端口号 ----查看端口进程信息
关闭某个端口的进程：
先用lsof -i:端口号 查出这个端口的进程，找出pid，然后kill -9 pid，关闭进程
或者 直接: fuser -k 80/tcp
查看端口进程：
netstat -anp | grep 80
时间： 2025-01-17 15:24:56