sql 高性能存储过程分页

USE [Lyjjr]
GO
/****** Object:  StoredProcedure [dbo].[P_ViewPage]    Script Date: 05/29/2015 17:18:56 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO

ALTER PROC [dbo].[P_ViewPage]
@TableName VARCHAR(200),     --表名
@FieldList VARCHAR(2000),    --显示列名，如果是全部字段则为*
@PrimaryKey VARCHAR(100),    --单一主键或唯一值键
@Where VARCHAR(4000),        --查询条件 不含'where'字符，如id>10 and len(userid)>9
@Order VARCHAR(1000),        --排序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
--注意当@SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
@SortType INT,               --排序规则 1:正序asc 2:倒序desc 3:多列排序方法
@RecorderCount INT,          --记录总数 0:会返回总记录
@PageSize INT,               --每页输出的记录数
@PageIndex INT,              --当前页数
@TotalCount INT OUTPUT,      --记返回总记录
@TotalPageCount INT OUTPUT   --返回总页数
AS
SET NOCOUNT ON
IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
SET @Order = RTRIM(LTRIM(@Order))
SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','')
WHILE CHARINDEX(', ',@Order) > 0 OR CHARINDEX(' ,',@Order) > 0
BEGIN
SET @Order = REPLACE(@Order,', ',',')
SET @Order = REPLACE(@Order,' ,',',')
END
IF ISNULL(@TableName,'') = '' OR ISNULL(@FieldList,'') = ''
OR ISNULL(@PrimaryKey,'') = ''
OR @SortType < 1 OR @SortType >3
OR @RecorderCount  < 0 OR @PageSize < 0 OR @PageIndex < 0
BEGIN
PRINT('ERR_00')
RETURN
END
IF @SortType = 3
BEGIN
IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC')
BEGIN PRINT('ERR_02') RETURN END
END
DECLARE @new_where1 VARCHAR(2000)
DECLARE @new_where2 VARCHAR(2000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
IF ISNULL(@where,'') = ''
BEGIN
SET @new_where1 = ' '
SET @new_where2 = ' WHERE  '
END
ELSE
BEGIN
SET @new_where1 = ' WHERE ' + @where
SET @new_where2 = ' WHERE ' + @where + ' AND '
END
IF ISNULL(@order,'') = '' OR @SortType = 1  OR @SortType = 2
BEGIN
IF @SortType = 1
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' ASC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' DESC'
END
IF @SortType = 2
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' DESC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' ASC'
END
END
ELSE
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
END
IF @SortType = 3 AND  CHARINDEX(','[email protected]+' ',','[email protected])>0
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
SET @new_order2 = @Order + ','
SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
SET @new_order2 = ' ORDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @FieldList <> '*'
BEGIN
SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',')
SET @FieldList = ',' + @FieldList
WHILE CHARINDEX(',',@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(','[email protected]_order3,1,CHARINDEX(',',@new_order3)),','[email protected]+',')>0
BEGIN
SET @FieldList =
@FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
END
SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))
END
END
SET @SqlCount = 'SELECT @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/'
+ CAST(@PageSize AS VARCHAR)+') FROM ' + @TableName + @new_where1
IF @RecorderCount  = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
SELECT @TotalCount = @RecorderCount
END
IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
SET @PageIndex =  CEILING((@TotalCount+0.0)/@PageSize)
END
IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
IF @PageIndex = 1 --返回第一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)  --返回最后一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(ABS(@PageSize*@[email protected]@PageSize))
+ ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1
END
END
ELSE
BEGIN
IF @SortType = 1  --仅主键正序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1
END
ELSE  --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@[email protected]*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 2  --仅主键反序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+' FROM '+ @TableName
+ @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1
END
ELSE  --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@[email protected]*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 3  --多列排序，必须包含主键，且放置最后，否则不处理
BEGIN
IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0
BEGIN PRINT('ERR_02') RETURN END
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
ELSE  --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
END
END
EXEC(@Sql)

调用方法：

 /// <summary>
        /// 存储过程分页
        /// </summary>
        /// <param name="pageIndex"></param>
        /// <param name="pageSize"></param>
        /// <param name="where"></param>
        /// <param name="order"></param>
        /// <param name="sortType"></param>
        /// <param name="totalCount"></param>
        /// <returns></returns>
        public DataTable GetLineRoadPage(int pageIndex, int pageSize, string where, string order, int sortType, out int totalCount)
        {
            totalCount = 0;
            SqlParameter[] parameters = {
					new SqlParameter("@TableName", SqlDbType.VarChar,200),
                    new SqlParameter("@FieldList", SqlDbType.VarChar,2000),
                    new SqlParameter("@PrimaryKey", SqlDbType.VarChar,100),
					new SqlParameter("@Where", SqlDbType.VarChar,2000),
					new SqlParameter("@Order", SqlDbType.VarChar,1000),
					new SqlParameter("@SortType", SqlDbType.Int,4),
					new SqlParameter("@RecorderCount", SqlDbType.Int,4),
					new SqlParameter("@PageSize", SqlDbType.Int,4),
					new SqlParameter("@PageIndex", SqlDbType.Int,4),
                    new SqlParameter("@TotalCount", SqlDbType.Int,4),
                    new SqlParameter("@TotalPageCount", SqlDbType.Int,4)};
            parameters[0].Value = "vLineRoad";
            parameters[1].Value = "[LrID],[Title],[SettlePrice],[MarketPrice],[ImageUrls],[LineType],[TraficTool],[NeedDays],[IsShow],[IsRecommend],[ThemID],[SplID],[LinePriceType],[IsUseTicket],[NeedNights],[ProductCode],[ChildrenPrice],[CreateTime],[UpdateTime],[SpLnName],[SupplierName],[Tel],[Dates]";
            parameters[2].Value = "LrID";
            parameters[3].Value = where;
            parameters[4].Value = order;
            parameters[5].Value = sortType;
            parameters[6].Value = 0;
            parameters[7].Value = pageSize;
            parameters[8].Value = pageIndex;
            parameters[9].Direction = ParameterDirection.Output;
            parameters[10].Direction = ParameterDirection.Output;
            DataTable dt = DbHelperSQL.RunProcedureToDataTable("P_ViewPage", parameters);
            totalCount = Convert.ToInt32(parameters[9].Value);
            return dt;
        }
时间： 2024-10-26 12:34:23

sql 高性能存储过程分页的相关文章

sql server存储过程分页，行变列

CREATE PROCEDURE [dbo].[PROC_GetPriviousAndNextDetailContent]@Index varchar(20),--表主键@Table varchar(100),--从哪个表获取数据@Columns varchar(100),--需要获取哪些字段@OrderStr varchar(100),--排序字段及方式@Where1    varchar(100),--row_number中的初步过滤条件@Where2 varchar(100)--当前要查询

Sql Server 存储过程分页

[2014-09-05] 在企业级项目开发中,分页查询,获取某一类数据的List列表,这一功能是最普遍也是最重要的功能.其做法有很多种,例如ORM中自定义分页查询,一般情况下是拼接强类型的查询条件,然后转换成sql语句,查出出分页结果.在ORM转换过程中会稍微损失性能,效率会降低.对于百万级以上的大数据量,要求查询界面显示速度快,此时手动写存储过程,并且在存储过程中分页是最佳选择.下面给出具体的示例与说明: ============================================

SQL 存储过程 分页

set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go -- ============================================= -- Author: *** -- Create date: 2014-03-27 20:00 -- Description: 采用最新的 row_number() over 技术高效分页方法 -- ============================================= ALTER PRO

SQL SERVER 通用分页存储过程

SQL SERVER 通用分页存储过程 从SQLSERVER 2005开始,提供了Row_Number()函数,利用函数生成的Index来处理分页,按照正常的逻辑思维都是传pageIndex和pageSize来完成分页,昨天前端和我沟通,他们使用jQuery.DataTable.js插件,而且经过了公司底层的封装,pageIndex需要变动一下,变成pageIndex*pageSize来传. 也就是说按每页显示30条算,第一次传0,第二次传30这样来计算,我也是醉了. 1.传pageIndex和

Oracle实践--PL/SQL综合之分页存储过程

当我们查看JDK API的时候,总会发现一些类说明写着,线程安全或者线程不安全,比如说StringBuilder中,有这么一句,"将StringBuilder 的实例用于多个线程是不安全的.如果需要这样的同步,则建议使用StringBuffer. ",那么下面手动创建一个线程不安全的类,然后在多线程中使用这个类,看看有什么效果. Count.java: [java] view plaincopy public class Count { private int num; public 

Sql Server通用分页存储过程

Sql Server2005通用分页存储过程 CREATE PROCEDURE [dbo].[Common_GetPagedList] ( @TableName nvarchar(100), --表名 @ColumnNames nvarchar(1000) = '*', --字段名集合(全部字段为*,其它逗号分隔) @OrderClause nvarchar(1000), --排序从句(不包含order by) @WhereClause nvarchar(1000) =N' 1=1 ',   

SQL存储过程分页（通用的拼接SQL语句思路实现）

多表通用的SQL存储过程分页 USE [EmailCenter] GO /****** Object: StoredProcedure [dbo].[Common_PageList] Script Date: 2016/2/29 11:00:19 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE PROC [dbo].[Common_PageList] ( @tab nvarchar(200),---表名 @strFl

SQL Server 2008 分页存储过程

在用的,已经不知道出处了,如果有侵权请告诉我,我立刻删掉. USE [ActivaOnlineSupport] GO /****** Object: StoredProcedure [dbo].[PROCE_PAGECHANGE] Script Date: 08/13/2014 13:45:17 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[PROCE_PAGECHANGE] ( @

Sql Server 存储过程中查询数据无法使用 Union(All)

原文:Sql Server 存储过程中查询数据无法使用 Union(All) 微软Sql Server数据库中,书写存储过程时,关于查询数据,无法使用Union(All)关联多个查询. 1.先看一段正常的SQL语句,使用了Union(All)查询: SELECT ci.CustId --客户编号 , ci.CustNam --客户名称 , ci.ContactBy --联系人 , ci.Conacts --联系电话 , ci.Addr -- 联系地址 , ci.Notes --备注信息 , ai