Centos 6.5 安装Oracle 11g R2 on vbox

由于上一篇的rac安装，截图较多，这一篇选择以txt的方式叙述，另外上一篇的时间比较久远，这里最近从新安装

--2018-10-29

1 os环境初始化

[[email protected] yum.repos.d]# lsb_release -a
LSB Version: :base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch
Distributor ID: CentOS
Description: CentOS release 6.5 (Final)
Release: 6.5
Codename: Final
[[email protected] yum.repos.d]# uname -r
2.6.32-431.el6.x86_64
[[email protected] ~]# ls -l /dev/cdrom |grep cdrom
lrwxrwxrwx. 1 root root 3 Oct 26 2018 /dev/cdrom -> sr0
[[email protected] ~]# mount -t iso9660 /dev/cdrom /mnt/
mount: block device /dev/sr0 is write-protected, mounting read-only
[[email protected] ~]# cd /etc/yum.repos.d/
[[email protected] yum.repos.d]# mv CentOS-Base.repo CentOS-Base.repo.bk
[[email protected] yum.repos.d]# vim public-yum-ol6.repo
[[email protected] yum.repos.d]# cat public-yum-ol6.repo
[ol6_latest]
name=CentOS6 $releasever Latest ($basearch)
gpgkey=file:///mnt/RPM-GPG-KEY-CentOS-6
baseurl=file:///mnt
gpgcheck=1
enabled=1
[[email protected] yum.repos.d]# yum clean all
[[email protected] yum.repos.d]# yum makecache
[[email protected] yum.repos.d]# yum install lrzsz -y

[[email protected] opt]# vi /etc/sysconfig/selinux
[[email protected] opt]# setenforce 0
[[email protected] opt]# service iptables stop
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Flushing firewall rules: [ OK ]
iptables: Unloading modules: [ OK ]
[[email protected] opt]# chkconfig iptables off

2 oracle环境初始化

[[email protected] opt]# /usr/sbin/groupadd -g 1000 oinstall
[[email protected] opt]# /usr/sbin/groupadd -g 1020 asmadmin
[[email protected] opt]# /usr/sbin/groupadd -g 1021 asmdba
[[email protected] opt]# /usr/sbin/groupadd -g 1022 asmoper
[[email protected] opt]# /usr/sbin/groupadd -g 1031 dba
[[email protected] opt]# /usr/sbin/groupadd -g 1032 oper
[[email protected] opt]# useradd -u 1100 -g oinstall -G asmadmin,asmdba,asmoper,oper,dba grid
[[email protected] opt]# useradd -u 1101 -g oinstall -G dba,asmdba,oper oracle
[[email protected] opt]# mkdir -p /u01/app/11.2.0/grid
[[email protected] opt]# mkdir -p /u01/app/grid
[[email protected] opt]# mkdir /u01/app/oracle
[[email protected] opt]# chown -R grid:oinstall /u01
[[email protected] opt]# chown oracle:oinstall /u01/app/oracle
[[email protected] opt]# chmod -R 775 /u01/
[[email protected] ~]# passwd grid
[[email protected] ~]# passwd oracle
[[email protected] opt]# grep MemTotal /proc/meminfo
MemTotal: 3088656 kB
[[email protected] opt]# vi /etc/sysctl.conf
[[email protected] opt]# sysctl -p
[[email protected] opt]# vim /etc/security/limits.conf
[[email protected] opt]# vi /etc/pam.d/login

[[email protected] yum.repos.d]# echo "nameserver 8.8.8.8" >> /etc/resolv.conf
[[email protected] yum.repos.d]# echo "DNS1=8.8.8.8" >> /etc/sysconfig/network-scripts/ifcfg-eth0

yum install gcc gcc-c++ libaio* glibc* glibc-devel* ksh libgcc* libstdc++* libstdc++-devel* make sysstat \
unixODBC* compat-libstdc++-33.x86_64 elfutils-libelf-devel glibc.i686 compat-libcap1 smartmontools unzip openssh* parted cvuqdisk -y
[[email protected] ~]# yum install ntpdate -y
[[email protected] ~]# ntpdate time.windows.com
[[email protected] ~]# date
yum install xterm xclock -y

3 ip规划

[[email protected] ~]# vim /etc/hosts
#Public IP
10.15.7.11 rac1
10.15.7.12 rac2
#Private IP
172.168.1.18 rac1priv
172.168.1.19 rac2priv
#Virtual IP
10.15.7.13 rac1vip
10.15.7.14 rac2vip
#Scan IP
10.15.7.15 racscan
[[email protected] ~]# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=rac1
GATEWAY=10.15.4.1
[[email protected] ~]# vim .bash_profile
umask 022
DISPLAY=10.15.7.115:0.0 ; export DISPLAY
HISTTIMEFORMAT="%Y:%M:%D %H-%m-%s"
export=HISTTIMEFORMAT
[[email protected] ~]# source .bash_profile

4 grid和oracle 的bash文件

[[email protected] ~]$ cat .bash_profile
# .bash_profile

# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi

# User specific environment and startup programs

PATH=$PATH:$HOME/bin

export PATH
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=+ASM1
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/11.2.0/grid
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
umask 022
[[email protected] ~]# su - oracle
[[email protected] ~]$ vi .bash_profile
[[email protected] ~]# cat /home/oracle/.bash_profile
# .bash_profile

# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi

# User specific environment and startup programs

PATH=$PATH:$HOME/bin

export PATH

export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=bol1
export ORACLE_UNQNAME=bol
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export TNS_ADMIN=$ORACLE_HOME/network/admin
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib

$ source .bash_profile使配置文件生效
[[email protected] ~]# source /home/grid/.bash_profile
[[email protected] ~]# source /home/oracle/.bash_profile

5 克隆主机rac1并修改

克隆并配置虚拟主机rac2 或者重新配置rac2
[[email protected] ~]# cat /home/grid/.bash_profile
# .bash_profile

# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi

# User specific environment and startup programs

PATH=$PATH:$HOME/bin
export PATH
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=+ASM2
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/11.2.0/grid
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
umask 022
export PATH
[[email protected] ~]# cat /home/oracle/.bash_profile
# .bash_profile

# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi

# User specific environment and startup programs

PATH=$PATH:$HOME/bin
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=bol2
export ORACLE_UNQNAME=bol
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
export TNS_ADMIN=$ORACLE_HOME/network/admin
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export PATH

6 配置ssh等效性

各节点生成Keys：
[[email protected] ~]# su - oracle
[[email protected] ~]$ mkdir ~/.ssh
[[email protected] ~]$ chmod 700 ~/.ssh
[[email protected] ~]$ ssh-keygen -t rsa
[[email protected] ~]$ ssh-keygen -t dsa
[[email protected] ~]# su - oracle
[[email protected] ~]$ mkdir ~/.ssh
[[email protected] ~]$ chmod 700 ~/.ssh
[[email protected] ~]$ ssh-keygen -t rsa
[[email protected] ~]$ ssh-keygen -t dsa
在节点1上进行互信配置：
[[email protected] ~]$ touch ~/.ssh/authorized_keys
[[email protected] ~]$ cd ~/.ssh
[[email protected] .ssh]$ ssh rac1 cat ~/.ssh/id_rsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac2 cat ~/.ssh/id_rsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac1 cat ~/.ssh/id_dsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac2 cat ~/.ssh/id_dsa.pub >> authorized_keys
在rac1把存储公钥信息的验证文件传送到rac2上
[[email protected] .ssh]$ pwd
/home/oracle/.ssh
[[email protected] .ssh]$ scp authorized_keys [email protected]:/home/oracle/.ssh/.

设置验证文件的权限
在每一个节点执行：
$ chmod 600 ~/.ssh/authorized_keys

启用用户一致性
在你要运行OUI的节点以oracle用户运行(这里选择rac1)：
[[email protected] .ssh]$ exec /usr/bin/ssh-agent $SHELL
[[email protected] .ssh]$ ssh-add
Identity added: /home/oracle/.ssh/id_rsa (/home/oracle/.ssh/id_rsa)
Identity added: /home/oracle/.ssh/id_dsa (/home/oracle/.ssh/id_dsa)

验证ssh配置是否正确
以oracle用户在所有节点分别执行：
ssh rac1 date
ssh rac2 date
ssh rac1priv date
ssh rac2priv date
===========
[[email protected] .ssh]$ su - grid
Password:
[[email protected] ~]$ mkdir ~/.ssh
[[email protected] ~]$ ssh-keygen -t rsa
[[email protected] ~]$ ssh-keygen -t dsa
[[email protected] ~]$ chmod 700 ~/.ssh

[[email protected] .ssh]$ su - grid
Password:
[[email protected] ~]$ mkdir ~/.ssh
[[email protected] ~]$ ssh-keygen -t rsa
[[email protected] ~]$ ssh-keygen -t dsa
[[email protected] ~]$ chmod 700 ~/.ssh

[[email protected] ~]$ touch ~/.ssh/authorized_keys
[[email protected] ~]$ cd ~/.ssh
[[email protected] .ssh]$ ssh rac1 cat ~/.ssh/id_rsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac2 cat ~/.ssh/id_rsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac1 cat ~/.ssh/id_dsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac2 cat ~/.ssh/id_dsa.pub >> authorized_keys
[[email protected] .ssh]$ scp authorized_keys [email protected]:/home/grid/.ssh/.
[grid[email protected] .ssh]$ exec /usr/bin/ssh-agent $SHELL
[[email protected] .ssh]$ ssh-add
Identity added: /home/grid/.ssh/id_rsa (/home/grid/.ssh/id_rsa)
Identity added: /home/grid/.ssh/id_dsa (/home/grid/.ssh/id_dsa)

[[email protected] .ssh]$
ssh rac1 date
ssh rac2 date
ssh rac1priv date
ssh rac2priv date

[[email protected] .ssh]$
ssh rac1 date
ssh rac2 date
ssh rac1priv date
ssh rac2priv date

7 配置共享存储

udev方式
[[email protected] ~]# cat /etc/issue
CentOS release 6.5 (Final)
Kernel \r on an \m
[[email protected] ~]# echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config
[[email protected] ~]# for i in b c d e f g;
> do
> echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules
> done
===
for i in b c d e f g;
do
echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules
done
===
[[email protected] ~]# cat /etc/udev/rules.d/99-oracle-asmdevices.rules
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBae01435a-3e52303e", NAME="asm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB714cf53b-64b30d94", NAME="asm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBdbf678d2-9ce1dd68", NAME="asm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBfe506a5f-89a411c1", NAME="asm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB0b346c6a-a4a60e78", NAME="asm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB9a904921-a5958d54", NAME="asm-diskg", OWNER="grid", GROUP="asmadmin", MODE="0660"
[[email protected] ~]# /sbin/start_udev
Starting udev: [ OK ]
[[email protected] ~]# ls -l /dev/asm*
brw-rw---- 1 grid asmadmin 8, 16 Oct 29 08:15 /dev/asm-diskb
brw-rw---- 1 grid asmadmin 8, 32 Oct 29 08:15 /dev/asm-diskc
brw-rw---- 1 grid asmadmin 8, 48 Oct 29 08:15 /dev/asm-diskd
brw-rw---- 1 grid asmadmin 8, 64 Oct 29 08:15 /dev/asm-diske
brw-rw---- 1 grid asmadmin 8, 80 Oct 29 08:15 /dev/asm-diskf
brw-rw---- 1 grid asmadmin 8, 96 Oct 29 08:15 /dev/asm-diskg

[[email protected] ~]# ls -l /dev/asm*
brw-rw---- 1 grid asmadmin 8, 16 Oct 29 08:19 /dev/asm-diskb
brw-rw---- 1 grid asmadmin 8, 32 Oct 29 08:19 /dev/asm-diskc
brw-rw---- 1 grid asmadmin 8, 48 Oct 29 08:19 /dev/asm-diskd
brw-rw---- 1 grid asmadmin 8, 64 Oct 29 08:19 /dev/asm-diske
brw-rw---- 1 grid asmadmin 8, 80 Oct 29 08:19 /dev/asm-diskf
brw-rw---- 1 grid asmadmin 8, 96 Oct 29 08:19 /dev/asm-diskg

8 安装gird

[[email protected] opt]# unzip p13390677_112040_Linux-x86-64_3of7.zip

/usr/bin/xterm -ls -display $DISPLAY
=[INS-41104]存在找不到private网卡，
几番试过之后，把eth1删除，然后重启，ifconfig找到eth1的hwaddr，cp eth0 eth1 ,并修改hwaddr和ipaddr，device，name，注释uuid
结果如下
===
[[email protected] ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
UUID=7e047ed1-c530-478f-8704-65565ac802ab
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=08:00:27:0E:DE:0E
IPADDR=10.15.7.11
PREFIX=22
GATEWAY=10.15.4.1
DNS1=8.8.8.8
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"

[[email protected] ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
TYPE=Ethernet
#UUID=7e047ed1-c530-478f-8704-65565ac802ab
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=08:00:27:8A:F5:38
IPADDR=1.1.1.1
PREFIX=22
GATEWAY=10.15.4.1
DNS1=8.8.8.8
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth1"

[[email protected] ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
UUID=288aa282-1d1f-4578-bd6a-1b45a48892b1
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=08:00:27:33:6D:5A
IPADDR=10.15.7.12
PREFIX=22
GATEWAY=10.15.4.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
DNS1=8.8.8.8
[[email protected] ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
TYPE=Ethernet
#UUID=288aa282-1d1f-4578-bd6a-1b45a48892b1
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
HWADDR=08:00:27:DC:E4:01
IPADDR=1.1.1.2
PREFIX=22
GATEWAY=10.15.4.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth1"
DNS1=8.8.8.8

=======
[[email protected] ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
10.15.7.11 rac1
1.1.1.1 rac1priv
10.15.7.13 rac1vip
10.15.7.12 rac2
1.1.1.2 rac2priv
10.15.7.14 rac2vip
10.15.7.15 scanip

两节点进行ping测试，分别ping“公有IP”和“私有IP”，两节点ping通正常后，按如下方式配置：
[[email protected] ~]# ping 1.1.1.2
[[email protected] ~]# ping 10.15.7.12
[[email protected] ~]# ping rac2priv
[[email protected] ~]# ping 1.1.1.1
[[email protected] ~]# ping 10.15.7.11
[[email protected] ~]# ping rac1priv

ssh rac1 date
ssh rac2 date
ssh rac1priv date
ssh rac2priv date

# yum install -y ksh
[[email protected] opt]# rpm -ivh --nodeps pdksh-5.2.14-36.el5.i386.rpm
[[email protected] ~]# yum list|grep ksh
ksh.x86_64 20120801-37.el6_9 @base
pdksh.i386 5.2.14-36.el5 installed
mksh.x86_64 39-7.el6_4.1 l6_latest

[[email protected] rpm]# rpm -ivh cvuqdisk-1.0.9-1.rpm
[[email protected] ~]# vi /etc/sysctl.conf
#ORACLE SETTING
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586

在rac1中执行脚本
[[email protected] rpm]# /u01/app/oraInventory/orainstRoot.sh
[[email protected] rpm]# /u01/app/11.2.0/grid/root.sh
在rac2执行脚本
[[email protected] grid]# /u01/app/oraInventory/orainstRoot.sh
[[email protected] grid]# /u01/app/11.2.0/grid/root.sh

[[email protected] ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.

Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[[email protected] ~]# /u01/app/11.2.0/grid/root.sh
Performing root user operation for Oracle 11g

The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid

Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...

Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
Installing Trace File Analyzer
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding Clusterware entries to upstart
CRS-2672: Attempting to start ‘ora.mdnsd‘ on ‘rac1‘
CRS-2676: Start of ‘ora.mdnsd‘ on ‘rac1‘ succeeded
CRS-2672: Attempting to start ‘ora.gpnpd‘ on ‘rac1‘
CRS-2676: Start of ‘ora.gpnpd‘ on ‘rac1‘ succeeded
CRS-2672: Attempting to start ‘ora.cssdmonitor‘ on ‘rac1‘
CRS-2672: Attempting to start ‘ora.gipcd‘ on ‘rac1‘
CRS-2676: Start of ‘ora.cssdmonitor‘ on ‘rac1‘ succeeded
CRS-2676: Start of ‘ora.gipcd‘ on ‘rac1‘ succeeded
CRS-2672: Attempting to start ‘ora.cssd‘ on ‘rac1‘
CRS-2672: Attempting to start ‘ora.diskmon‘ on ‘rac1‘
CRS-2676: Start of ‘ora.diskmon‘ on ‘rac1‘ succeeded
CRS-2676: Start of ‘ora.cssd‘ on ‘rac1‘ succeeded

ASM created and started successfully.

Disk Group OCR created successfully.

clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user ‘root‘, privgrp ‘root‘..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk 62cb5cc42bdc4ff8bfd1069706eeed4b.
Successfully replaced voting disk group with +OCR.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
-- ----- ----------------- --------- ---------
1. ONLINE 62cb5cc42bdc4ff8bfd1069706eeed4b (/dev/asm-diskb) [OCR]
Located 1 voting disk(s).
CRS-2672: Attempting to start ‘ora.asm‘ on ‘rac1‘
CRS-2676: Start of ‘ora.asm‘ on ‘rac1‘ succeeded
CRS-2672: Attempting to start ‘ora.OCR.dg‘ on ‘rac1‘
CRS-2676: Start of ‘ora.OCR.dg‘ on ‘rac1‘ succeeded
Configure Oracle Grid Infrastructure for a Cluster ... succeeded

[[email protected] ~]# su - grid
[[email protected] ~]$ crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
[[email protected] ~]$ crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora....ER.lsnr ora....er.type 0/5 0/ ONLINE ONLINE rac1
ora....N1.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE rac1
ora.OCR.dg ora....up.type 0/5 0/ ONLINE ONLINE rac1
ora.asm ora.asm.type 0/5 0/ ONLINE ONLINE rac1
ora.cvu ora.cvu.type 0/5 0/0 ONLINE ONLINE rac1
ora.gsd ora.gsd.type 0/5 0/ OFFLINE OFFLINE
ora....network ora....rk.type 0/5 0/ ONLINE ONLINE rac1
ora.oc4j ora.oc4j.type 0/1 0/2 ONLINE ONLINE rac1
ora.ons ora.ons.type 0/3 0/ ONLINE ONLINE rac1
ora....SM1.asm application 0/5 0/0 ONLINE ONLINE rac1
ora....C1.lsnr application 0/5 0/0 ONLINE ONLINE rac1
ora.rac1.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac1.ons application 0/3 0/0 ONLINE ONLINE rac1
ora.rac1.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac1
ora....SM2.asm application 0/5 0/0 ONLINE ONLINE rac2
ora....C2.lsnr application 0/5 0/0 ONLINE ONLINE rac2
ora.rac2.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac2.ons application 0/3 0/0 ONLINE ONLINE rac2
ora.rac2.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac2
ora.scan1.vip ora....ip.type 0/0 0/0 ONLINE ONLINE rac1

[[email protected] ~]$ olsnodes -n #.查看集群中节点配置信息
rac1 1
rac2 2
[[email protected] ~]$ olsnodes -n -i -s -t
rac1 1 rac1vip Active Unpinned
rac2 2 rac2vip Active Unpinned
[[email protected] ~]$ ps -ef|grep lsnr|grep -v ‘grep‘|grep -v ‘ocfs‘|awk ‘{print$9}‘
LISTENER_SCAN1
LISTENER
[[email protected] ~]$ srvctl status asm -a
ASM is running on rac2,rac1
ASM is enabled.
[[email protected] ~]$ crsctl query css votedisk #查看集群件的表决磁盘信息
## STATE File Universal Id File Name Disk group
-- ----- ----------------- --------- ---------
1. ONLINE 62cb5cc42bdc4ff8bfd1069706eeed4b (/dev/asm-diskb) [OCR]
Located 1 voting disk(s).

9 asmca

只在节点rac1执行即可
进入grid用户下
[[email protected] ~]# su - grid
利用asmca
[[email protected] ~]$ asmca

具体安装截图可参看上一篇rac安装

10 安装db

[[email protected] ~]# /u01/app/oracle/product/11.2.0/db_1/root.sh
[[email protected] ~]# /u01/app/oracle/product/11.2.0/db_1/root.sh

11 dbca

[[email protected] ~]# su - oracel
[[email protected] ~]$ dbca

12 RAC维护

[[email protected] ~]$ crs_stat -t
[[email protected] ~]$ crsctl check cluster
[[email protected] ~]$ crsctl check crs
[[email protected] ~]$ srvctl status database -d bol
$ olsnodes
$ olsnodes -n
$ olsnodes -n -i -s -t
$ crsctl query css votedisk
$ srvctl config scan #查看集群SCAN VIP信息
[[email protected] ~]$ srvctl config scan
SCAN name: scanip, Network: 1/10.15.4.0/255.255.252.0/eth0
SCAN VIP name: scan1, IP: /scanip/10.15.7.15
[[email protected] ~]$ srvctl config scan_listener #查看集群SCAN Listener信息
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521

12.1 启、停集群数据库

整个集群的数据库启停
进入grid用户
[[email protected] ~]$ srvctl stop database -d bol
[[email protected] ~]$ srvctl start database -d bol
[[email protected] ~]$ srvctl status database -d bol
关闭所有节点
进入root用户
关闭所有节点
[[email protected] bin]# pwd
/u01/app/11.2.0/grid/bin
[[email protected] bin]# ./crs_stat -t -v #确认集群各项资源和服务
[[email protected] bin]# ./crsctl stop crs #实际只关闭了当前结点
[[email protected] bin]# ./crsctl stop cluster -all#关闭集群
[[email protected] bin]# ./crs_stat -t -v
开启
[[email protected] bin]# ./crs_stat -t -v
[[email protected] bin]# ./crsctl start cluster -all
[[email protected] bin]# ./srvctl status database -d bol
[[email protected] bin]# ./srvctl start database -d bol
[[email protected] bin]# ./emctl start bol #开启OEM

所有实例和服务的状态
[[email protected] ~]$ srvctl status database -d bol
Instance bol1 is running on node rac1
Instance bol2 is running on node rac2
单个实例的状态
[[email protected] ~]$ srvctl status instance -d bol -i bol1
Instance bol1 is running on node rac1
列出配置的所有数据库
[[email protected] ~]$ srvctl config database
bol
特定节点上节点应用程序的状态
[[email protected] ~]$ srvctl status nodeapps -n rac1
VIP rac1vip is enabled
VIP rac1vip is running on node: rac1
Network is enabled
Network is running on node: rac1
GSD is disabled
GSD is not running on node: rac1
ONS is enabled
ONS daemon is running on node: rac1
ASM 实例的状态
[[email protected] ~]$ srvctl status asm -n rac1
ASM is running on rac1
显示 RAC 数据库的配置
[[email protected] ~]$ srvctl config database -d bol
Database unique name: bol
Database name: bol
Oracle home: /u01/app/oracle/product/11.2.0/db_1
Oracle user: oracle
Spfile: +DATA/bol/spfilebol.ora
Domain:
Start options: open
Stop options: immediate
Database role: PRIMARY
Management policy: AUTOMATIC
Server pools: bol
Database instances: bol1,bol2
Disk Groups: DATA,FRA
Mount point paths:
Services:
Type: RAC
Database is administrator managed
显示节点应用程序的配置 —（VIP、GSD、ONS、监听器）
[[email protected] ~]$ srvctl config nodeapps -n rac1 -a -g -s -l
-n <node_name> option has been deprecated.
Warning:-l option has been deprecated and will be ignored.
Network exists: 1/10.15.4.0/255.255.252.0/eth0, type static
VIP exists: /rac1vip/10.15.7.13/10.15.4.0/255.255.252.0/eth0, hosting node rac1
GSD exists
ONS exists: Local port 6100, remote port 6200, EM port 2016
Warning:-n option has been deprecated and will be ignored.
Name: LISTENER
Network: 1, Owner: grid
Home: <CRS home>
/u01/app/11.2.0/grid on node(s) rac1,rac2
End points: TCP:1521
显示 ASM 实例的配置
[[email protected] ~]$ srvctl config asm -n rac1
Warning:-n option has been deprecated and will be ignored.
ASM home: /u01/app/11.2.0/grid
ASM listener: LISTENER

集群中所有正在运行的实例
SELECT
inst_id
, instance_number inst_no
, instance_name inst_name
, parallel
, status
, database_status db_status
, active_state state
, host_name host
FROM gv$instance
ORDER BY inst_id;

1 1 bol1 YES OPEN ACTIVE NORMAL rac1
2 2 bol2 YES OPEN ACTIVE NORMAL rac2

位于磁盘组中的所有数据文件
select name from v$datafile
union
select member from v$logfile
union
select name from v$controlfile
union
select name from v$tempfile;

属于“OCR”磁盘组的所有 ASM 磁盘
SELECT path
FROM v$asm_disk
WHERE group_number IN (select group_number
from v$asm_diskgroup
where name = ‘OCR‘);

/dev/asm-diskc
/dev/asm-diskd
/dev/asm-diskb

12.2 创建表空间和用户

[[email protected] ~]$ asmcmd
ASMCMD> ls
DATA/
FRA/
OCR/
ASMCMD> pwd
+DATA/BOL/DATAFILE

#on scan_ip
$ sqlplus "/as sysdba"
create tablespace test datafile ‘+DATA/BOL/DATAFILE/test01.dbf‘ size 50m ;
create tablespace SDE_TBS
logging
datafile ‘+DATA/BOL/DATAFILE/SDE_TBS.dbf‘
size 500m
autoextend on
next 200m maxsize 20480m
extent management local;
create user SDE identified by sde default tablespace SDE_TBS;
grant connect,resource,dba to sde;

12.3 单节点关闭和启动

SQL> show parameter name;

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
cell_offloadgroup_name string
db_file_name_convert string
db_name string bol
db_unique_name string bol
global_names boolean FALSE
instance_name string bol1
lock_name_space string
log_file_name_convert string
processor_group_name string
service_names string bol
SQL> select instance_name,status from gv$instance;

INSTANCE_NAME STATUS
---------------- ------------
bol1 OPEN
bol2 OPEN

[[email protected] ~]$ srvctl stop listener -n rac1 #关闭监听
[[email protected] ~]$ srvctl status listener -n rac1 #查看监听状态
Listener LISTENER is enabled on node(s): rac1
Listener LISTENER is not running on node(s): rac1
[[email protected] ~]$ ps -ef |grep -i local=no |wc -l
8
[[email protected] ~]$ srvctl stop instance -o immediate -d bol -i bol1 #关闭节点1数据库
[[email protected] ~]$ srvctl status database -d bol #查看数据库状态
Instance bol1 is not running on node rac1
Instance bol2 is running on node rac2
[[email protected] ~]$ srvctl status instance -d bol -i bol1 #查看节点1数据库状态
Instance bol1 is not running on node rac1

[[email protected] ~]# cd /u01/app/11.2.0/grid/bin/
[[email protected] bin]# ./crsctl stop crs
[[email protected] bin]# ./crs_stat -t -v #查看状态
CRS-0184: Cannot communicate with the CRS daemon.
[[email protected] bin]# ./srvctl status asm -n rac1 #在rac1节点上执行
PRKH-1010 : Unable to communicate with CRS services.
PRKH-3003 : An attempt to communicate with the CSS daemon failed
[[email protected] bin]# ./srvctl status asm -n rac1 #在rac2节点上执行
ASM is not running on rac1

$ ps -ef |grep -i ora
$ ps -ef |grep -i asm
#登录scan ip节点，查看连接的实例
select instance_name,status from gv$instance;

#开启rac1
[[email protected] bin]# ./crs_stat -t
CRS-0184: Cannot communicate with the CRS daemon.
[[email protected] bin]# ./crsctl start crs
CRS-4123: Oracle High Availability Services has been started.
[[email protected] bin]# ./srvctl status asm #确保ASM服务已经运行在两个节点上
ASM is running on rac2,rac1
[[email protected] bin]# ./crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora.DATA.dg ora....up.type 0/5 0/ ONLINE ONLINE rac1
ora.FRA.dg ora....up.type 0/5 0/ ONLINE ONLINE rac1
ora....ER.lsnr ora....er.type 0/5 0/ ONLINE ONLINE rac2
ora....N1.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE rac2
ora.OCR.dg ora....up.type 0/5 0/ ONLINE ONLINE rac1
ora.asm ora.asm.type 0/5 0/ ONLINE ONLINE rac1
ora.bol.db ora....se.type 0/2 0/1 ONLINE ONLINE rac2
ora.cvu ora.cvu.type 0/5 0/0 ONLINE ONLINE rac2
ora.gsd ora.gsd.type 0/5 0/ OFFLINE OFFLINE
ora....network ora....rk.type 0/5 0/ ONLINE ONLINE rac1
ora.oc4j ora.oc4j.type 0/1 0/2 ONLINE ONLINE rac2
ora.ons ora.ons.type 0/3 0/ ONLINE ONLINE rac1
ora....SM1.asm application 0/5 0/0 ONLINE ONLINE rac1
ora....C1.lsnr application 0/5 0/0 OFFLINE OFFLINE
ora.rac1.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac1.ons application 0/3 0/0 ONLINE ONLINE rac1
ora.rac1.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac1
ora....SM2.asm application 0/5 0/0 ONLINE ONLINE rac2
ora....C2.lsnr application 0/5 0/0 ONLINE ONLINE rac2
ora.rac2.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac2.ons application 0/3 0/0 ONLINE ONLINE rac2
ora.rac2.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac2
ora.scan1.vip ora....ip.type 0/0 0/0 ONLINE ONLINE rac2
[[email protected] ~]$ srvctl start instance -d bol -i bol1 #开启集群节点一数据库实例
[[email protected] ~]$ srvctl status database -d bol
Instance bol1 is running on node rac1
Instance bol2 is running on node rac2
[[email protected] ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora.DATA.dg ora....up.type ONLINE ONLINE rac1
ora.FRA.dg ora....up.type ONLINE ONLINE rac1
ora....ER.lsnr ora....er.type ONLINE ONLINE rac1
ora....N1.lsnr ora....er.type ONLINE ONLINE rac2
ora.OCR.dg ora....up.type ONLINE ONLINE rac1
ora.asm ora.asm.type ONLINE ONLINE rac1
ora.bol.db ora....se.type ONLINE ONLINE rac1
ora.cvu ora.cvu.type ONLINE ONLINE rac2
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE rac1
ora.oc4j ora.oc4j.type ONLINE ONLINE rac2
ora.ons ora.ons.type ONLINE ONLINE rac1
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application OFFLINE OFFLINE
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip ora....t1.type ONLINE ONLINE rac1
ora....SM2.asm application ONLINE ONLINE rac2
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application OFFLINE OFFLINE
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip ora....t1.type ONLINE ONLINE rac2
ora.scan1.vip ora....ip.type ONLINE ONLINE rac2

select value from v$parameter where name=‘processes‘;

12.4 网络查看

[[email protected] bin]# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:0E:DE:0E
inet addr:10.15.7.11 Bcast:10.15.7.255 Mask:255.255.252.0
inet6 addr: fe80::a00:27ff:fe0e:de0e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3907156 errors:0 dropped:0 overruns:0 frame:0
TX packets:7161180 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:536184469 (511.3 MiB) TX bytes:9769872694 (9.0 GiB)

eth0:1 Link encap:Ethernet HWaddr 08:00:27:0E:DE:0E
inet addr:10.15.7.13 Bcast:10.15.7.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

eth1 Link encap:Ethernet HWaddr 08:00:27:8A:F5:38
inet addr:1.1.1.1 Bcast:1.1.3.255 Mask:255.255.252.0
inet6 addr: fe80::a00:27ff:fe8a:f538/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3636608 errors:0 dropped:0 overruns:0 frame:0
TX packets:3017320 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2524862742 (2.3 GiB) TX bytes:1669614220 (1.5 GiB)

eth1:1 Link encap:Ethernet HWaddr 08:00:27:8A:F5:38
inet addr:169.254.204.165 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2272848 errors:0 dropped:0 overruns:0 frame:0
TX packets:2272848 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1524528859 (1.4 GiB) TX bytes:1524528859 (1.4 GiB)
[[email protected] bin]# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:33:6D:5A
inet addr:10.15.7.12 Bcast:10.15.7.255 Mask:255.255.252.0
inet6 addr: fe80::a00:27ff:fe33:6d5a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8414792 errors:0 dropped:0 overruns:0 frame:0
TX packets:1577797 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9466367813 (8.8 GiB) TX bytes:172203059 (164.2 MiB)

eth0:1 Link encap:Ethernet HWaddr 08:00:27:33:6D:5A
inet addr:10.15.7.14 Bcast:10.15.7.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

eth0:3 Link encap:Ethernet HWaddr 08:00:27:33:6D:5A
inet addr:10.15.7.15 Bcast:10.15.7.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

eth1 Link encap:Ethernet HWaddr 08:00:27:DC:E4:01
inet addr:1.1.1.2 Bcast:1.1.3.255 Mask:255.255.252.0
inet6 addr: fe80::a00:27ff:fedc:e401/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3017568 errors:0 dropped:0 overruns:0 frame:0
TX packets:3637072 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1669901139 (1.5 GiB) TX bytes:2525032018 (2.3 GiB)

eth1:1 Link encap:Ethernet HWaddr 08:00:27:DC:E4:01
inet addr:169.254.202.95 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:848199 errors:0 dropped:0 overruns:0 frame:0
TX packets:848199 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:472739764 (450.8 MiB) TX bytes:472739764 (450.8 MiB)

原文地址：https://www.cnblogs.com/yhq1314/p/9921962.html

时间： 2024-10-09 23:56:51

Centos 6.5 安装Oracle 11g R2 on vbox的相关文章

CentOS 6.5 安装Oracle 11g R2

CentOS 安装Oracle 11g R2 实验环境: Linux服务器操作系统:CentOS 5.5 32位(注意:系统安装时请单独分区/data用来安装oracle数据库) Linux服务器IP地址:192.168.32.130 Oracle数据库版本:linux_11gR2_database Windows客户端系统:Windows Xp 具体操作: 一.安装 X window yum groupinstall "X Window System" vim /etc/initta

CentOS 6.5_x64安装Oracle 11g R2

安装环境: 操作系统:CentOS6.5_x64 主机名:Oracle 内存:2G(官方最低要求1G) 硬盘:500G(企业版安装所需4.29G和1.7G数据文件) 安装centos的时候要注意,swap交换分区的大小最好为物理内存的两倍,网络最好配置静态ip,还有安装时把开发工具装上,因为Linux Oracle的安装依赖于gcc,make等开发包.当然x系统也是必须安装的,因为OUI是基于图形界面的嘛.centos安装成功后,我们可以修改一下/etc/initab文件,这样下次启动时,就不会

centos 7 下面安装oracle 11g r2 过程分享

本人对LINUX等很多还不熟悉,如果有不对的地方还请各位指正.谢谢. 打算学习下ORACLE,RMAN备份与还原功能,所以安装了虚拟机,用的是centos7 X86_64-1611版本,oracle用的是linux.x64_11g R2版本.参考了其他人发表的博客. 链接:http://blog.csdn.net/whatlookingfor/article/details/52382458 但是在一步步过程中,还是遇到很多问题,整理如下: 1.centos 安装之后,无法访问网络,最开始以为是

CentOS6安装 Oracle 11g R2

选型:32位的内存是个瓶颈,已经是64位的时代了.使用64位的CentOS6 和 64位的Oracle 11g R2在虚拟机器安装,采用hostonly方式设置网络注意:能上网的网卡要设置一下ICS(Internet连接共享)给VMware Network Adapter VMnet1这样对于虚拟机,网关是192.168.137.1,IP地址请也要设置在192.168.137.0/24段硬盘40G,内存2G 1.下载软件1.1.CentOS 6(x86_64)http://mirrors.163

CentOS 5.11下Oracle 11G R2 Dataguard搭建

Datagard算是Oracle企业版的一种容灾方案,在企业中广泛应用,我就将搭建过程记录下来以作备用. 主机名    数据库版本    实例名    IP db1    Oracle 11G R2    member    172.16.1.250 db2    Oracle 11G R2    member    172.16.1.251 默认情况下以上都已经安装好了Oracle数据库,但是只在db1上建立了数据库和监听,db2只安装Oracle软件不建库,不建监听. 目录: 打开强制归档日

Oracle Linux 6.3下安装Oracle 11g R2(11.2.0.3)

本文主要描述了在Oracle Linux 6.3下安装Oracle 11gR2(11.2.0.3).从Oracle 11g开始,Oracle官方网站不再提供其Patch的下载链接,需要使用Meatlink账户才可以进行下载.童鞋们不要着急,没有Metalink账户的也可以自己百度一下,网上有很多下载链接,迅雷就可以搞定了.Oracle 11.2.0.3整合为7个zip压缩包,如果仅仅是安装Oracle Database,下载1至2.zip包即可.下面是其安装步骤. 一.准备安装环境1.安装rpm

关于安装oracle 11G R2 for Windows X64问题

下载地址: http://www.oracle.com/technetwork/cn/articles/112010-win64soft-094461.html #*特殊说明* #关于下载工具的使用:千万千万不要使用迅雷下载,至少我使用QQ旋风下载两个压缩包内的文件夹合并时不会出现需要替换的问题,如果出现需要替换,说明没有下载成功,并且如果你做了替换,在oracle创建数据库时,会出现报错. #关于两个压缩包的文件夹合并,将2of2内的database\stage\Components文件夹里面

Redhat Linux 下安装Oracle 11g R2

能够下载:http://download.csdn.net/detail/ykh554541184/8086647文档方便查阅 官方文档:http://docs.oracle.com/cd/E11882_01/nav/portal_11.htm 1:基本环境 Redhat Enterprise Linux 6.132bit 内存:128GB 磁盘空间:600GB 2:检查Oracle 11g所需的包,假设没有在Redhat Enterprise Linux 6.1的安装光盘里找,然后安装. OR

CentOS 7(同red hat)安装oracle 11g r2最全最细攻略

前瞻: 1. 安装Gnome桌面版X86_64版本的CentOS 7系统(或者相对应版本的Red Hat等). 2. 下载安装并激活Xmanager Enterprise 5用于对linux系统的连接访问以及数据传输等. 3. 下载解压缩oracle 11g r2 for linux的程序包,并将其中的[database/stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/all.jar]内添加文件夹[fallback]以及放入文件[simsun