openstack I版的搭建八--

[[email protected] ~]# ifconfig

brq39513fa0-54 Link encap:Ethernet HWaddr 00:0C:29:3B:15:9F

inet addr:192.168.33.11 Bcast:192.168.33.255 Mask:255.255.255.0

inet6 addr: fe80::48c3:d8ff:fe32:61b4/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:11 errors:0 dropped:0 overruns:0 frame:0

TX packets:7 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:1086 (1.0 KiB) TX bytes:510 (510.0 b)

eth0 Link encap:Ethernet HWaddr 00:0C:29:3B:15:9F

inet6 addr: fe80::20c:29ff:fe3b:159f/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:1134 errors:0 dropped:0 overruns:0 frame:0

TX packets:794 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:155254 (151.6 KiB) TX bytes:89524 (87.4 KiB)

eth1 Link encap:Ethernet HWaddr 00:0C:29:3B:15:A9

inet addr:192.168.224.130 Bcast:192.168.224.255 Mask:255.255.255.0

inet6 addr: fe80::20c:29ff:fe3b:15a9/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:31 errors:0 dropped:0 overruns:0 frame:0

TX packets:41 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:5789 (5.6 KiB) TX bytes:3454 (3.3 KiB)

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:20855 errors:0 dropped:0 overruns:0 frame:0

TX packets:20855 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:5930267 (5.6 MiB) TX bytes:5930267 (5.6 MiB)

ns-646b17aa-ca Link encap:Ethernet HWaddr FA:16:3E:5C:64:A9

inet addr:192.168.33.103 Bcast:192.168.33.255 Mask:255.255.255.0

inet6 addr: fe80::f816:3eff:fe5c:64a9/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:184 errors:0 dropped:0 overruns:0 frame:0

TX packets:392 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:33486 (32.7 KiB) TX bytes:30289 (29.5 KiB)

tap646b17aa-ca Link encap:Ethernet HWaddr C2:63:47:F7:43:53

inet6 addr: fe80::c063:47ff:fef7:4353/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:392 errors:0 dropped:0 overruns:0 frame:0

TX packets:184 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:30289 (29.5 KiB) TX bytes:33486 (32.7 KiB)

[[email protected] ~]# brctl show

bridge name bridge id STP enabled interfaces

brq39513fa0-54 8000.000c293b159f no eth0

tap646b17aa-ca

虚拟机开始获取的ip地址是VMware Workstation的DHCP给分配的，所以我们得给它手动配置一个IP

最好把VMware Workstation的DHCP关闭掉。

时间： 2024-10-23 18:59:15

openstack I版的搭建八--的相关文章

openstack I版的搭建二

[[email protected] ~]# cd /usr/local/src/ [[email protected] src]# cd keystone-2014.1 [[email protected] keystone-2014.1]# python setup.py install [[email protected] keystone-2014.1]# cd etc/ [[email protected] etc]# ll 总用量 72 -rw-rw-r-- 1 1004 1004

openstack I版的搭建六--

[[email protected] init.d]# chkconfig openstack-neutron-linuxbridge-agent on [[email protected] init.d]# chkconfig openstack-nova-compute on [[email protected] ~]# nova host-list +---------------------------+-------------+----------+ | host_name

openstack I版的搭建四--

[[email protected]]# cd /usr/local/src/neutron-2014.1 [[email protected] neutron-2014.1]# python setup.py install [[email protected] etc]# pwd /usr/local/src/neutron-2014.1/etc [[email protected] etc]# mkdir /etc/neutron [[email protected] etc]# mkdi

openstack I版的搭建五--

登陆用户demo登陆如果你在启动某个服务的时候,没启动起来,没日子那么我们就手动启动一下. [[email protected] ~]# neutron-server --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini --config-file /etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini 这样的

openstack I版的搭建三--Nova

安装Nova [[email protected] src]# cd ~ [[email protected] ~]# cd /usr/local/src/nova-2014.1 [[email protected] nova-2014.1]# python setup.py install [[email protected] nova]# pwd /usr/local/src/nova-2014.1/etc/nova [ro[email protected] nova]# ll 总用量 48

openstack I版的搭建一十--基于glusterfs的云硬盘

计算节点和控制节点上都安装一下 cd /etc/yum.repos.d/ wget http://download.gluster.org/pub/gluster/glusterfs/3.4/3.4.3/CentOS/glusterfs-epel.repo yum install glusterfs-server 验证一下两个节点是否安装成功 [[email protected] ~]# glusterfs -V glusterfs 3.4.5 built on Jul 24 2014 19:1

openstack-r版(rocky)搭建基于centos7.4 的openstack swift对象存储服务三

openstack-r版(rocky)搭建基于centos7.4 的openstack swift对象存储服务一 openstack-r版(rocky)搭建基于centos7.4 的openstack swift对象存储服务二 openstack-r版(rocky)搭建基于centos7.4 的openstack swift对象存储服务三 openstack-r版(rocky)搭建基于centos7.4 的openstack swift对象存储服务四以下操作在控制节点执行control

struts2+hibernate+spring配置版框架搭建以及简单测试（方便脑补）

为了之后学习的日子里加深对框架的理解和使用,这里将搭建步奏简单写一下,目的主要是方便以后自己回来脑补: 1:File--->New--->Other--->Maven--->Maven Project--->Next(之后界面如下所示:) --->Next(点击next之后出现如下界面:选择最后一个 maven-archetype-webapp,然后点击next) --->Next(点击next之后出现如下界面,然后选择好组织号,工程号,版本号即可),最后点击Fi

CentOS7.2非HA分布式部署Openstack Pike版（实验）

部署环境一.组网拓扑二.设备配置笔记本:联想L440处理器:i3-4000M 2.40GHz内存:12G虚拟机软件:VMware? Workstation 12 Pro(12.5.2 build-4638234) 三.虚拟机配置 Controller节点:系统:CentOS7.2 64位(最小化安装)处理器:4核内存:4G硬盘:100G网卡:3块 Compute节点:系统:CentOS7.2 64位(最小化安装)处理器:4核内存:4G硬盘:100G网卡:3块 Cinder节点:系统:Cen