Linux中 groupadd 和 useradd 的命令说明

groupadd [options] group

说明
The groupadd command creates a new group account using the values specified on the command line plus the default values from the system. The new group will be entered into the system files as needed.
Options

参数

-f, --force
    This option causes the command to simply exit with success status if the specified group already exists. When used with -g, and the specified GID already exists, another (unique) GID is chosen (i.e. -g is turned off).
    和rm -f的意义一样, 使用此参数时, 即使指定的组已经存在, 命令依然会正常退出(不返回错误), 当和-g一起使用时, 如果指定的GID已经存在, 则会自动使用另一个GID.

-g, --gid GID
    The numerical value of the group‘s ID. This value must be unique, unless the -o option is used. The value must be non-negative. The default is to use the smallest ID value greater than 999 and greater than every other group. Values between 0 and 999 are typically reserved for system accounts.

-h, --help
    Display help message and exit.

-K, --key KEY=VALUE
    Overrides /etc/login.defs defaults (GID_MIN, GID_MAX and others). Multiple -K options can be specified.
    Example: -K GID_MIN=100 -K GID_MAX=499
    Note: -K GID_MIN=10,GID_MAX=499 doesn‘t work yet.

-o, --non-unique
    This option permits to add a group with a non-unique GID.

-p, --password PASSWORD
    The encrypted password, as returned by crypt(3). The default is to disable the password.
    Note: This option is not recommended because the password (or encrypted password) will be visible by users listing the processes.
    You should make sure the password respects the system‘s password policy.

-r, --system
    Create a system group.
    The numeric identifiers of new system groups are choosen in the SYS_GID_MIN-SYS_GID_MAX range, defined in login.defs, instead of GID_MIN-GID_MAX.
    创建一个系统组. 新系统组的GID会自动从login.defs中的SYS_GID_MIN-SYS_GID_MAX中选择, 而不是 GID_MIN-GID_MAX

useradd [options] LOGIN

useradd -D
useradd -D [options]

说明
When invoked without the -D option, the useradd command creates a new user account using the values specified on the command line plus the default values from the system. Depending on command line options, the useradd command will update system files and may also create the new user‘s home directory and copy initial files.

By default, a group will also be created for the new user (see -g, -N, -U, and USERGROUPS_ENAB).

选项

-b, --base-dir BASE_DIR
    The default base directory for the system if -d HOME_DIR is not specified. BASE_DIR is concatenated with the account name to define the home directory. If the -m option is not used, BASE_DIR must exist.
    If this option is not specified, useradd will use the base directory specified by the HOME variable in /etc/default/useradd, or /home by default.

-c, --comment COMMENT
    Any text string. It is generally a short description of the login, and is currently used as the field for the user‘s full name.

-d, --home HOME_DIR
    The new user will be created using HOME_DIR as the value for the user‘s login directory. The default is to append the LOGIN name to BASE_DIR and use that as the login directory name. The directory HOME_DIR does not have to exist but will not be created if it is missing.

-D, --defaults
    See below, the subsection "Changing the default values".

-e, --expiredate EXPIRE_DATE
    The date on which the user account will be disabled. The date is specified in the format YYYY-MM-DD.
    If not specified, useradd will use the default expiry date specified by the EXPIRE variable in /etc/default/useradd, or an empty string (no expiry) by default.

-f, --inactive INACTIVE
    The number of days after a password expires until the account is permanently disabled. A value of 0 disables the account as soon as the password has expired, and a value of -1 disables the feature.
    If not specified, useradd will use the default inactivity period specified by the INACTIVE variable in /etc/default/useradd, or -1 by default.

-g, --gid GROUP
    The group name or number of the user‘s initial login group. The group name must exist. A group number must refer to an already existing group.
    If not specified, the bahavior of useradd will depend on the USERGROUPS_ENAB variable in /etc/login.defs. If this variable is set to yes (or -U/--user-group is specified on the command line), a group will be created for the user, with the same name as her loginname. If the variable is set to no (or -N/--no-user-group is specified on the command line), useradd will set the primary group of the new user to the value specified by the GROUP variable in /etc/default/useradd, or 100 by default.

-G, --groups GROUP1[,GROUP2,...[,GROUPN]]]
    A list of supplementary groups which the user is also a member of. Each group is separated from the next by a comma, with no intervening whitespace. The groups are subject to the same restrictions as the group given with the -g option. The default is for the user to belong only to the initial group.

-h, --help
    Display help message and exit.

-k, --skel SKEL_DIR
    The skeleton directory, which contains files and directories to be copied in the user‘s home directory, when the home directory is created by useradd.
    This option is only valid if the -m (or --create-home) option is specified.
    If this option is not set, the skeleton directory is defined by the SKEL variable in /etc/default/useradd or, by default, /etc/skel.

-K, --key KEY=VALUE
    Overrides /etc/login.defs defaults (UID_MIN, UID_MAX, UMASK, PASS_MAX_DAYS and others).
    Example: -K PASS_MAX_DAYS=-1 can be used when creating system account to turn off password ageing, even though system account has no password at all. Multiple -K options can be specified, e.g.: -K UID_MIN=100 -K UID_MAX=499
    Note: -K UID_MIN=10,UID_MAX=499 doesn‘t work yet.

-l, --no-log-init
    Do not add the user to the lastlog and faillog databases.
    By default, the user‘s entries in the lastlog and faillog databases are resetted to avoid reusing the entry from a previously deleted user.

-m, --create-home
    Create the user‘s home directory if it does not exist. The files and directories contained in the skeleton directory (which can be defined with the -k option) will be copied to the home directory.
    useradd will create the home directory unless CREATE_HOME in /etc/login.defs is set to no.

-M
    Do not create the user‘s home directory, even if the system wide setting from /etc/login.defs (CREATE_HOME) is set to yes.

-N, --no-user-group
    Do not create a group with the same name as the user, but add the user to the group specified by the -g option or by the GROUP variable in /etc/default/useradd.
    The default behavior (if the -g, -N, and -U options are not specified) is defined by the USERGROUPS_ENAB variable in /etc/login.defs.

-o, --non-unique
    Allow the creation of a user account with a duplicate (non-unique) UID.
    This option is only valid in combination with the -o option.

-p, --password PASSWORD
    The encrypted password, as returned by crypt(3). The default is to disable the password.
    Note: This option is not recommended because the password (or encrypted password) will be visible by users listing the processes.
    You should make sure the password respects the system‘s password policy.

-r, --system
    Create a system account.
    System users will be created with no aging information in /etc/shadow, and their numeric identifiers are choosen in the SYS_UID_MIN-SYS_UID_MAX range, defined in /etc/login.defs, instead of UID_MIN-UID_MAX (and their GID counterparts for the creation of groups).
    Note that useradd will not create a home directory for such an user, regardless of the default setting in /etc/login.defs (CREATE_HOME). You have to specify the -m options if you want a home directory for a system account to be created.

-s, --shell SHELL
    The name of the user‘s login shell. The default is to leave this field blank, which causes the system to select the default login shell specified by the SHELL variable in /etc/default/useradd, or an empty string by default.

-u, --uid UID
    The numerical value of the user‘s ID. This value must be unique, unless the -o option is used. The value must be non-negative. The default is to use the smallest ID value greater than 999 and greater than every other user. Values between 0 and 999 are typically reserved for system accounts.

-U, --user-group
    Create a group with the same name as the user, and add the user to this group.
    The default behavior (if the -g, -N, and -U options are not specified) is defined by the USERGROUPS_ENAB variable in /etc/login.defs.

-Z, --selinux-user SEUSER
    The SELinux user for the user‘s login. The default is to leave this field blank, which causes the system to select the default SELinux user.
时间： 2024-08-11 06:07:09

Linux中 groupadd 和 useradd 的命令说明的相关文章

linux中vim编辑器各种常用命令及用法

linux中vim编辑器的常用命令以及用法(注意严格区分大小写以及中英文): vim编辑器有三种模式,分别是:编辑模式,输入模式以及末行模式. 模式转换: 编辑模式>>>输入模式: i:在光标所在字符前面,转为输入模式(即转完后在光标所在字符前输入):                      I:在光标所在行的行首,转为输入模式(即转完后在行首输入,不包括行首空                         白) a:在光标所在字符后,转为输入模式(即转完后在光标所在字符后面输入):

linux中没有dos2UNIX或者UNIX2dos命令怎么解决办法

linux中没有dos2UNIX或者UNIX2dos命令怎么解决办法 http://blog.csdn.net/w616589292/article/details/38274475 dos2unix命令找不到怎么办 https://zhidao.baidu.com/question/1860968406611919387.html linux中没有dos2UNIX或者UNIX2dos命令怎么解决办法 http://blog.csdn.net/w616589292/article/details

linux 中c/c++实现终端命令行命令

在终端中可以从用下面命令获得帮助: man system 在c/c++代码中实现和在终端中输入的命令行一样的效果,以命令(audacious -p &)为例,该代码实现用audacious在后台播放音乐的功能,当然前提是安装了audacious. c++代码: 1 #include <cstdlib> 2 int main() 3 { 4 system("audacious -p &"); 5 return 0; 6 } 编译执行即可. linux 中c/c

详解Linux中的cat文本输出命令用法

作系统 > LINUX > 详解Linux中的cat文本输出命令用法 Linux命令手册   发布时间:2016-01-14 14:14:35   作者:张映    我要评论 这篇文章主要介绍了Linux中的cat文本输出命令用法,是Linux入门学习中的基础知识,需要的朋友可以参考下 cat命令是linux下的一个文本输出命令,通常是用于观看某个文件的内容的.一.功能cat主要有三大功能:1.一次显示整个文件. 复制代码 代码如下: $ cat filename 2.从键盘创建一个文件. 复

linux中Jenkins启动/重启/停止命令

简要记录一下Linux 中Jenkins启动/重启/停止命令 启动service jenkins start1重启service jenkins restart1停止service jenkins stop1此外,还有直接使用url的方式,不过当然不包括启动(此时服务还未启动),只需要在访问jenkins服务器的网址url地址就可以了此处假定 jenkins部署在本机,端口为 8080 浏览器进入Jenkins,登录http://localhost:8080/1关闭Jenkinshttp://l

Linux 中 10 个有用的命令行补全例子

在 Linux 系统中,当你输入一个命令,再按两次 TAB 键,就会列出所有以你输入字符开头的可用命令.这并不新鲜,可能你已经知道了.这个功能被称作命令行补全bash completion.默认情况下,bash 命令行可以自动补全文件或目录名称.不过,我们可以增强 bash 命令补全功能,通过 complete 命令让它达到新的高度. 这个教程说明了我们是怎样使用可编程的命令行补全功能programmable completion把自动补全功能应用于选项或者命令行参数. 例如:在输入 write

Linux中文本搜索工具“grep”命令详解

人生中应该有两次冲动,一次是轰轰烈烈的爱情,一次是说走就走的旅行.我属于第三种,轰轰烈烈的辞职然后马不停蹄的参加了马哥的linux面授班,两周时间内对linux有了些初步的了解,与此同时,两周内八天课程中的各种定义.概念.原理.命令由于量大.琐碎,也着实给我们这些小白一个下马威,即使每天11点撤退也觉得时间不够用.鉴于对自己的负责和马哥的作业要求,特对文本搜索工具grep写些使用指南,其中可能会有描述不确切或有偏颇之处,望及时指正. 开始--. 首先,要说一下grep是什么,用在什么地方. gr

[转载]linux中各种压缩包的解压缩命令

表1 Linux常用的压缩及解压缩命令说明 常用命令 简要中文说明 程序所在目录 gzip 压缩成文件名为 .gz 的压缩文件(也可用 –d 选项变成解压) /bin gunzip 将 .gz 压缩文件解压(可用 gzip 加 –d 参数代替) /bin tar 打包为 .tar 的打包文件或解开(也可配合 –z 选项呼叫 gzip进行 .gz 文件的压缩或解压) /bin compress 压缩成文件名为 .Z 的压缩文件(也可用 –d 选项变成解压) /usr/bin uncompress

Linux中系统检测工具top命令

本文转自:https://www.cnblogs.com/zhoug2020/p/6336453.html 首先介绍top中一些字段的含义: VIRT:virtual memory usage 虚拟内存1.进程"需要的"虚拟内存大小,包括进程使用的库.代码.数据等2.假如进程申请100m的内存,但实际只使用了10m,那么它会增长100m,而不是实际的使用量 RES:resident memory usage 常驻内存1.进程当前使用的内存大小,但不包括swap out2.包含其他进程的