1、
1 @****************************************************************************** 2 @ File：head.S 3 @ 功能：设置SDRAM，将程序复制到SDRAM，然后跳到SDRAM继续执行 4 @****************************************************************************** 5 6 .extern main 7 .text 8 .global _start 9 _start: 10 11 12 Reset: 13 ldr sp, =4096 @ 设置栈指针，以下都是C函数，调用前需要设好栈 14 bl disable_watch_dog @ 关闭WATCHDOG，否则CPU会不断重启 15 bl clock_init @ 设置MPLL，改变FCLK、HCLK、PCLK 16 bl memsetup @ 设置存储控制器以使用SDRAM 17 bl copy_steppingstone_to_sdram @ 复制代码到SDRAM中 18 ldr pc, =on_sdram @ 跳到SDRAM中继续执行 19 20 21 on_sdram: 22 ldr sp, =0x34000000 @ 设置栈指针 23 ldr lr, =halt_loop @ 设置返回地址 24 ldr pc, =main @ 调用main函数 25 26 27 halt_loop: 28 b halt_loop 29 30 31 32
2、
1 /*
2 * init.c: 进行一些初始化
3 */
4
5 #include "s3c24xx.h"
6
7 void disable_watch_dog(void);
8 void clock_init(void);
9 void memsetup(void);
10 void copy_steppingstone_to_sdram(void);
11
12 /*
13 * 关闭WATCHDOG，否则CPU会不断重启
14 */
15 void disable_watch_dog(void)
16 {
17 WTCON = 0; // 关闭WATCHDOG很简单，往这个寄存器写0即可
18 }
19
20 #define S3C2410_MPLL_200MHZ ((0x5c<<12)|(0x04<<4)|(0x00))
21 #define S3C2440_MPLL_200MHZ ((0x5c<<12)|(0x01<<4)|(0x02))
22 /*
23 * 对于MPLLCON寄存器，[19:12]为MDIV，[9:4]为PDIV，[1:0]为SDIV
24 * 有如下计算公式：
25 * S3C2410: MPLL(FCLK) = (m * Fin)/(p * 2^s)
26 * S3C2410: MPLL(FCLK) = (2 * m * Fin)/(p * 2^s)
27 * 其中: m = MDIV + 8, p = PDIV + 2, s = SDIV
28 * 对于本开发板，Fin = 12MHz
29 * 设置CLKDIVN，令分频比为：FCLK:HCLK:PCLK=1:2:4，
30 * FCLK=200MHz,HCLK=100MHz,PCLK=50MHz
31 */
32 void clock_init(void)
33 {
34 // LOCKTIME = 0x00ffffff; // 使用默认值即可
35 CLKDIVN = 0x03; // FCLK:HCLK:PCLK=1:2:4, HDIVN=1,PDIVN=1
36
37 /* 如果HDIVN非0，CPU的总线模式应该从“fast bus mode”变为“asynchronous bus mode” */
38 __asm__(
39 "mrc p15, 0, r1, c1, c0, 0\n" /* 读出控制寄存器 */
40 "orr r1, r1, #0xc0000000\n" /* 设置为“asynchronous bus mode” */
41 "mcr p15, 0, r1, c1, c0, 0\n" /* 写入控制寄存器 */
42 );
43
44 /* 判断是S3C2410还是S3C2440 */
45 if ((GSTATUS1 == 0x32410000) || (GSTATUS1 == 0x32410002))
46 {
47 MPLLCON = S3C2410_MPLL_200MHZ; /* 现在，FCLK=200MHz,HCLK=100MHz,PCLK=50MHz */
48 }
49 else
50 {
51 MPLLCON = S3C2440_MPLL_200MHZ; /* 现在，FCLK=200MHz,HCLK=100MHz,PCLK=50MHz */
52 }
53 }
54
55 /*
56 * 设置存储控制器以使用SDRAM
57 */
58 void memsetup(void)
59 {
60 volatile unsigned long *p = (volatile unsigned long *)MEM_CTL_BASE;
61
62 /* 这个函数之所以这样赋值，而不是像前面的实验(比如mmu实验)那样将配置值
63 * 写在数组中，是因为要生成”位置无关的代码”，使得这个函数可以在被复制到
64 * SDRAM之前就可以在steppingstone中运行
65 */
66 /* 存储控制器13个寄存器的值 */
67 p[0] = 0x22011110; //BWSCON
68 p[1] = 0x00000700; //BANKCON0
69 p[2] = 0x00000700; //BANKCON1
70 p[3] = 0x00000700; //BANKCON2
71 p[4] = 0x00000700; //BANKCON3
72 p[5] = 0x00000700; //BANKCON4
73 p[6] = 0x00000700; //BANKCON5
74 p[7] = 0x00018005; //BANKCON6
75 p[8] = 0x00018005; //BANKCON7
76
77 /* REFRESH,
78 * HCLK=12MHz: 0x008C07A3,
79 * HCLK=100MHz: 0x008C04F4
80 */
81 p[9] = 0x008C04F4;
82 p[10] = 0x000000B1; //BANKSIZE
83 p[11] = 0x00000030; //MRSRB6
84 p[12] = 0x00000030; //MRSRB7
85 }
86
87 void copy_steppingstone_to_sdram(void)
88 {
89 unsigned int *pdwSrc = (unsigned int *)0;
90 unsigned int *pdwDest = (unsigned int *)0x30000000;
91
92 while (pdwSrc < (unsigned int *)4096)
93 {
94 *pdwDest = *pdwSrc;
95 pdwDest++;
96 pdwSrc++;
97 }
98 }
3、
1 #include "serial.h"
2
3 int main()
4 {
5 unsigned char c;
6 uart0_init(); // 波特率115200，8N1(8个数据位，无校验位，1个停止位)
7
8 while(1)
9 {
10 // 从串口接收数据后，判断其是否数字或子母，若是则加1后输出
11 c = getc();
12 if (isDigit(c) || isLetter(c))
13 putc(c+1);
14 }
15
16 return 0;
17 }
4、
#include "s3c24xx.h" //所有寄存器的地址
#include "serial.h" //
#define TXD0READY (1<<2)
#define RXD0READY (1)
#define PCLK 50000000 // init.c中的clock_init函数设置PCLK为50MHz
#define UART_CLK PCLK // UART0的时钟源设为PCLK
#define UART_BAUD_RATE 115200 // 波特率
#define UART_BRD ((UART_CLK / (UART_BAUD_RATE * 16)) - 1) //波特率计算公式
//初始化UART0
/*
* 初始化UART0
* 115200,8N1,无流控
*/
void uart0_init(void)
{
//配置引脚
GPHCON |= 0xa0; // GPH2,GPH3用作TXD0,RXD0；配置引脚功能
GPHUP = 0x0c; // GPH2,GPH3内部上拉，上拉使能
//设置传输格式
ULCON0 = 0x03; // 8N1(8个数据位，无较验，1个停止位)
//选择时钟源，中断方式或查询方式
UCON0 = 0x05; // 查询方式，UART时钟源为PCLK
//是否使用FIFO
UFCON0 = 0x00; // 不使用FIFO
//是否使用流控
UMCON0 = 0x00; // 不使用流控
//设置波特率
UBRDIV0 = UART_BRD; // 波特率为115200
}
//数据传输过程：
//发送过程：CPU - 发送FIFO - 发送移位器 - TxDn数据线
//接收过程：RxDn数据线 - 接收移位器 - FIFO - CPU
/*
* 发送一个字符
*/
void putc(unsigned char c)
{
/* 等待，直到发送缓冲区中的数据已经全部发送出去 */
while (!(UTRSTAT0 & TXD0READY)); //100时发送器发送缓冲器为空，发送完毕
/* 向UTXH0寄存器中写入数据，UART即自动将它发送出去 */
UTXH0 = c; //缓冲区已经发送出去了，现在将需要发送的数据写入
}
/*
* 接收字符
*/
unsigned char getc(void)
{
/* 等待，直到接收缓冲区中的有数据 */
while (!(UTRSTAT0 & RXD0READY));
/* 直接读取URXH0寄存器，即可获得接收到的数据 */
return URXH0; //数据已经接收到缓冲区了，现在读取到寄存器也就是接收到了发送的数据
}
/*
* 判断一个字符是否数字
*/
int isDigit(unsigned char c)
{
if (c >= ‘0‘ && c <= ‘9‘)
return 1;
else
return 0;
}
/*
* 判断一个字符是否英文字母
*/
int isLetter(unsigned char c)
{
if (c >= ‘a‘ && c <= ‘z‘)
return 1;
else if (c >= ‘A‘ && c <= ‘Z‘)
return 1;
else
return 0;
}
5、
1 void uart0_init(void); 2 void putc(unsigned char c); 3 unsigned char getc(void); 4 int isDigit(unsigned char c); 5 int isLetter(unsigned char c);
6、
1 objs := head.o init.o serial.o main.o 2 3 uart.bin: $(objs) 4 arm-linux-ld -Tuart.lds -o uart_elf $^ 5 arm-linux-objcopy -O binary -S uart_elf [email protected] 6 arm-linux-objdump -D -m arm uart_elf > uart.dis 7 8 %.o:%.c 9 arm-linux-gcc -Wall -O2 -c -o [email protected] $< 10 11 %.o:%.S 12 arm-linux-gcc -Wall -O2 -c -o [email protected] $< 13 14 clean: 15 rm -f uart.bin uart_elf uart.dis *.o 16
7、
SECTIONS {
. = 0x30000000;
.text : { *(.text) }
.rodata ALIGN(4) : {*(.rodata)}
.data ALIGN(4) : { *(.data) }
.bss ALIGN(4) : { *(.bss) *(COMMON) }
}
8、
1 /* WOTCH DOG register */ 2 #define WTCON (*(volatile unsigned long *)0x53000000) 3 4 /* SDRAM regisers */ 5 #define MEM_CTL_BASE 0x48000000 6 #define SDRAM_BASE 0x30000000 7 8 /* NAND Flash registers */ 9 #define NFCONF (*(volatile unsigned int *)0x4e000000) 10 #define NFCMD (*(volatile unsigned char *)0x4e000004) 11 #define NFADDR (*(volatile unsigned char *)0x4e000008) 12 #define NFDATA (*(volatile unsigned char *)0x4e00000c) 13 #define NFSTAT (*(volatile unsigned char *)0x4e000010) 14 15 /*GPIO registers*/ 16 #define GPBCON (*(volatile unsigned long *)0x56000010) 17 #define GPBDAT (*(volatile unsigned long *)0x56000014) 18 19 #define GPFCON (*(volatile unsigned long *)0x56000050) 20 #define GPFDAT (*(volatile unsigned long *)0x56000054) 21 #define GPFUP (*(volatile unsigned long *)0x56000058) 22 23 #define GPGCON (*(volatile unsigned long *)0x56000060) 24 #define GPGDAT (*(volatile unsigned long *)0x56000064) 25 #define GPGUP (*(volatile unsigned long *)0x56000068) 26 27 #define GPHCON (*(volatile unsigned long *)0x56000070) 28 #define GPHDAT (*(volatile unsigned long *)0x56000074) 29 #define GPHUP (*(volatile unsigned long *)0x56000078) 30 31 32 33 /*UART registers*/ 34 #define ULCON0 (*(volatile unsigned long *)0x50000000) 35 #define UCON0 (*(volatile unsigned long *)0x50000004) 36 #define UFCON0 (*(volatile unsigned long *)0x50000008) 37 #define UMCON0 (*(volatile unsigned long *)0x5000000c) 38 #define UTRSTAT0 (*(volatile unsigned long *)0x50000010) 39 #define UTXH0 (*(volatile unsigned char *)0x50000020) 40 #define URXH0 (*(volatile unsigned char *)0x50000024) 41 #define UBRDIV0 (*(volatile unsigned long *)0x50000028) 42 43 44 /*interrupt registes*/ 45 #define SRCPND (*(volatile unsigned long *)0x4A000000) 46 #define INTMOD (*(volatile unsigned long *)0x4A000004) 47 #define INTMSK (*(volatile unsigned long *)0x4A000008) 48 #define PRIORITY (*(volatile unsigned long *)0x4A00000c) 49 #define INTPND (*(volatile unsigned long *)0x4A000010) 50 #define INTOFFSET (*(volatile unsigned long *)0x4A000014) 51 #define SUBSRCPND (*(volatile unsigned long *)0x4A000018) 52 #define INTSUBMSK (*(volatile unsigned long *)0x4A00001c) 53 54 /*external interrupt registers*/ 55 #define EINTMASK (*(volatile unsigned long *)0x560000a4) 56 #define EINTPEND (*(volatile unsigned long *)0x560000a8) 57 58 /*clock registers*/ 59 #define LOCKTIME (*(volatile unsigned long *)0x4c000000) 60 #define MPLLCON (*(volatile unsigned long *)0x4c000004) 61 #define UPLLCON (*(volatile unsigned long *)0x4c000008) 62 #define CLKCON (*(volatile unsigned long *)0x4c00000c) 63 #define CLKSLOW (*(volatile unsigned long *)0x4c000010) 64 #define CLKDIVN (*(volatile unsigned long *)0x4c000014) 65 66 67 /*PWM & Timer registers*/ 68 #define TCFG0 (*(volatile unsigned long *)0x51000000) 69 #define TCFG1 (*(volatile unsigned long *)0x51000004) 70 #define TCON (*(volatile unsigned long *)0x51000008) 71 #define TCNTB0 (*(volatile unsigned long *)0x5100000c) 72 #define TCMPB0 (*(volatile unsigned long *)0x51000010) 73 #define TCNTO0 (*(volatile unsigned long *)0x51000014) 74 75 #define GSTATUS1 (*(volatile unsigned long *)0x560000B0)
时间： 2024-10-10 05:30:26