L10,not for jazz

expressions:

It is called a clavichord这被称为古钢琴

a friend of my father‘s我父亲的朋友

 

words：

musical，adj，音乐的

instrument，n，乐器

clavichord，古钢琴

recently，最近

damage，伤害

shock，震惊

 

made in表示产地

made of 表示某种材料

made from 表示多种材料

made by 表示制造人

 

That‘s where we keep it.

we mustn‘t touch it.

a friend of my father‘s is mending the clavichord.

时间： 2024-09-30 19:20:06

L10,not for jazz的相关文章

Not for jazz

原文 We have an old musical instrument. It is called a clavichord. It was made in Germany in 1681. Our clavichord is kept in the living room. It has belonged to our family for a long time. The instrument was bought by my grandfather many years ago. Rec

【翻译自mos文章】在11gR2 rac环境中，文件系统使用率紧张，并且lsof显示有很多oraagent_oracle.l10 (deleted)

在11gR2 rac环境中,文件系统使用率紧张,并且lsof显示有很多oraagent_oracle.l10 (deleted) 参考原文: High Space Usage and "lsof" Output Shows Many 'oraagent_oracle.l10 (deleted)' in GI environment (Doc ID 1598252.1) 适用于: Oracle Database - Enterprise Edition - Version 11.2.0.

L10 安装网卡驱动

一.安装网卡驱动 1. 检查各种依赖包是否安装 2. 安装 加载网卡驱动: ip: L10 安装网卡驱动

L10 数据入站、转发、出站流程

二 写出防火墙规则链之间的顺序也就是入站数据流向.转发数据流向.出站数据流向的过程 入站:PREROUTING→INPUT 数据包到达防火墙,由prerouting处理,判断是否修改地址 路由选择:判断是要到另一个网段,还是要访问本机 如果本机,就传递到INPUT规则链,如果INPUT允许通过,则将数据包传给本机的应用程序出站:OUTPUT→POSTROUTING 数据要出去,经过OUTPUT规则链进行处理,如果允许出去,则需要POSTROUTING规则链进行判断地址是否需要修改,本机数据就可以

[转]Core Kubernetes: Jazz Improv over Orchestration

(因为写的真的是太好了,所以必须要转载) This is the first in a series of blog posts that details some of the inner workings of Kubernetes. If you are simply an operator or user of Kubernetes you don’t necessarily need to understand these details. But if you prefer dept

lesson10 Not for Jazz

[课文] we have an old musical instrument,It's called a clavichord, it was made in Germany in 1681.Our clacichord was kept in the living room, it has belonged to our family for a long time.the instrument was bought by my grandfather many years ago,recen

L10 PUtty+SSH 访问vncviewer

在Linux下配置一个VNC服务器,并设置2个用户,要求其中一个用户登录时不需要输入密码.然后在客户端使用ssh+vncview的方式访问. 安装tigervnc: 输入的密码是123456 连接服务器的密码. 创建了几个文件. 设置admin的vnc密码 启动: 不用输入密码既可以登录admin putty配置: 点击Open vnc访问: 以上即可以实现通过SSH的VNCViewer的访问.

L10.2 keepalive 实现haproxy高可用（双主模型）

keepalived实现haproxy高可用. haproxy实现RS负载均衡. 说明: 1,当keepalive节点状态master时,haproxy应该是start状态,backup为restart,fault为stop状态:(注意脚本监测权限减5,这样会有数字计算优先级方面的问题,因此在backup状态也使用restart haproxy) 2,对haproxy的start,restart,stop,都将用脚本的方式实现,在keepalived配置中调用脚本: 3,我们不只对keepali

L10 keepalived 基本使用(主备模式)

配置keepalive基本主备模式 配置说明: 要求默认情况下由节点node1提供服务,当节点node1不可用时,由节点node2提供服务(即虚拟IP漂移至节点node2). 节点node1 192.168.0.20 (主节点) 节点node2 192.168.0.21(备用节点) 虚拟IP(对外提供服务的IP 192.168.0.60 ping node 192.168.0.22(用于节点自身状态监测) 内容: 1,节点node1上的配置文件 2,节点node2配置 3,使用脚本防止脑裂. 4