Uboot makefile 解读

#
# (C) Copyright 2000-2012
# Wolfgang Denk, DENX Software Engineering, [email protected]
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.    See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#

VERSION = 2012
PATCHLEVEL = 04
SUBLEVEL = 01
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
endif
TIMESTAMP_FILE = $(obj)include/generated/timestamp_autogenerated.h
VERSION_FILE = $(obj)include/generated/version_autogenerated.h

HOSTARCH := $(shell uname -m |     sed -e s/i.86/x86/         -e s/sun4u/sparc64/         -e s/arm.*/arm/         -e s/sa110/arm/         -e s/ppc64/powerpc/         -e s/ppc/powerpc/         -e s/macppc/powerpc/        -e s/sh.*/sh/)

HOSTOS := $(shell uname -s | tr ‘[:upper:]‘ ‘[:lower:]‘ |         sed -e ‘s/\(cygwin\).*/cygwin/‘)

# Set shell to bash if possible, otherwise fall back to sh
SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH;     else if [ -x /bin/bash ]; then echo /bin/bash;     else echo sh; fi; fi)

export    HOSTARCH HOSTOS SHELL

# Deal with colliding definitions from tcsh etc.
VENDOR=

#########################################################################
# Allow for silent builds
ifeq (,$(findstring s,$(MAKEFLAGS)))
XECHO = echo
else
XECHO = :
endif

#########################################################################
#
# U-boot build supports producing a object files to the separate external
# directory. Two use cases are supported:
#
# 1) Add O= to the make command line
# ‘make O=/tmp/build all‘
#
# 2) Set environement variable BUILD_DIR to point to the desired location
# ‘export BUILD_DIR=/tmp/build‘
# ‘make‘
#
# The second approach can also be used with a MAKEALL script
# ‘export BUILD_DIR=/tmp/build‘
# ‘./MAKEALL‘
#
# Command line ‘O=‘ setting overrides BUILD_DIR environent variable.
#
# When none of the above methods is used the local build is performed and
# the object files are placed in the source directory.
#

ifdef O
ifeq ("$(origin O)", "command line")
BUILD_DIR := $(O)
endif
endif

ifneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)

# Attempt to create a output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})

# Verify if it was successful.
BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
endif # ifneq ($(BUILD_DIR),)

OBJTREE        := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
SPLTREE        := $(OBJTREE)/spl
SRCTREE        := $(CURDIR)
TOPDIR        := $(SRCTREE)
LNDIR        := $(OBJTREE)
export    TOPDIR SRCTREE OBJTREE SPLTREE

MKCONFIG    := $(SRCTREE)/mkconfig
export MKCONFIG

ifneq ($(OBJTREE),$(SRCTREE))
REMOTE_BUILD    := 1
export REMOTE_BUILD
endif

# $(obj) and (src) are defined in config.mk but here in main Makefile
# we also need them before config.mk is included which is the case for
# some targets like unconfig, clean, clobber, distclean, etc.
ifneq ($(OBJTREE),$(SRCTREE))
obj := $(OBJTREE)/
src := $(SRCTREE)/
else
obj :=
src :=
endif
export obj src

# Make sure CDPATH settings don‘t interfere
unexport CDPATH

#########################################################################

# The "tools" are needed early, so put this first
# Don‘t include stuff already done in $(LIBS)
# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
# is "yes"), so compile examples after U-Boot is compiled.
SUBDIR_TOOLS = tools
SUBDIR_EXAMPLES = examples/standalone examples/api
SUBDIRS = $(SUBDIR_TOOLS)

.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE)

ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))

# Include autoconf.mk before config.mk so that the config options are available
# to all top level build files.  We need the dummy all: target to prevent the
# dependency target in autoconf.mk.dep from being the default.
all:
sinclude $(obj)include/autoconf.mk.dep
sinclude $(obj)include/autoconf.mk

ifndef CONFIG_SANDBOX
SUBDIRS += $(SUBDIR_EXAMPLES)
endif

# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export    ARCH CPU BOARD VENDOR SOC

# set default to nothing for native builds
ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE ?=
endif

# load other configuration
include $(TOPDIR)/config.mk

# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent).  Otherwise, search for a linker script in a
# standard location.

LDSCRIPT_MAKEFILE_DIR = $(dir $(LDSCRIPT))

ifndef LDSCRIPT
    #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
    ifdef CONFIG_SYS_LDSCRIPT
        # need to strip off double quotes
        LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
    endif
endif

# If there is no specified link script, we look in a number of places for it
ifndef LDSCRIPT
    ifeq ($(CONFIG_NAND_U_BOOT),y)
        LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
        ifeq ($(wildcard $(LDSCRIPT)),)
            LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
        endif
    endif
    ifeq ($(wildcard $(LDSCRIPT)),)
        LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
    endif
    ifeq ($(wildcard $(LDSCRIPT)),)
        LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
    endif
    ifeq ($(wildcard $(LDSCRIPT)),)
        LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
        # We don‘t expect a Makefile here
        LDSCRIPT_MAKEFILE_DIR =
    endif
    ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
    endif
endif

#########################################################################
# U-Boot objects....order is important (i.e. start must be first)

OBJS  = $(CPUDIR)/start.o
ifeq ($(CPU),x86)
OBJS += $(CPUDIR)/start16.o
OBJS += $(CPUDIR)/resetvec.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += $(CPUDIR)/resetvec.o
endif
ifeq ($(CPU),mpc85xx)
OBJS += $(CPUDIR)/resetvec.o
endif

OBJS := $(addprefix $(obj),$(OBJS))

LIBS  = lib/libgeneric.o
LIBS += lib/lzma/liblzma.o
LIBS += lib/lzo/liblzo.o
LIBS += lib/zlib/libz.o
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo     "board/$(VENDOR)/common/lib$(VENDOR).o"; fi)
LIBS += $(CPUDIR)/lib$(CPU).o
ifdef SOC
LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).o
endif
ifeq ($(CPU),ixp)
LIBS += arch/arm/cpu/ixp/npe/libnpe.o
endif
ifeq ($(CONFIG_OF_EMBED),y)
LIBS += dts/libdts.o
endif
LIBS += arch/$(ARCH)/lib/lib$(ARCH).o
LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o     fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o     fs/ubifs/libubifs.o
LIBS += net/libnet.o
LIBS += disk/libdisk.o
LIBS += drivers/bios_emulator/libatibiosemu.o
LIBS += drivers/block/libblock.o
LIBS += drivers/dma/libdma.o
LIBS += drivers/fpga/libfpga.o
LIBS += drivers/gpio/libgpio.o
LIBS += drivers/hwmon/libhwmon.o
LIBS += drivers/i2c/libi2c.o
LIBS += drivers/input/libinput.o
LIBS += drivers/misc/libmisc.o
LIBS += drivers/mmc/libmmc.o
LIBS += drivers/mtd/libmtd.o
LIBS += drivers/mtd/nand/libnand.o
LIBS += drivers/mtd/onenand/libonenand.o
LIBS += drivers/mtd/ubi/libubi.o
LIBS += drivers/mtd/spi/libspi_flash.o
LIBS += drivers/net/libnet.o
LIBS += drivers/net/phy/libphy.o
LIBS += drivers/pci/libpci.o
LIBS += drivers/pcmcia/libpcmcia.o
LIBS += drivers/power/libpower.o
LIBS += drivers/spi/libspi.o
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/libqe.o
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/libqe.o
LIBS += drivers/net/fm/libfm.o
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc86xx)
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
LIBS += drivers/rtc/librtc.o
LIBS += drivers/serial/libserial.o
ifeq ($(CONFIG_GENERIC_LPC_TPM),y)
LIBS += drivers/tpm/libtpm.o
endif
LIBS += drivers/twserial/libtws.o
LIBS += drivers/usb/eth/libusb_eth.o
LIBS += drivers/usb/gadget/libusb_gadget.o
LIBS += drivers/usb/host/libusb_host.o
LIBS += drivers/usb/musb/libusb_musb.o
LIBS += drivers/usb/phy/libusb_phy.o
LIBS += drivers/usb/ulpi/libusb_ulpi.o
LIBS += drivers/video/libvideo.o
LIBS += drivers/watchdog/libwatchdog.o
LIBS += common/libcommon.o
LIBS += lib/libfdt/libfdt.o
LIBS += api/libapi.o
LIBS += post/libpost.o

ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
LIBS += $(CPUDIR)/omap-common/libomap-common.o
endif

ifeq ($(SOC),mx5)
LIBS += $(CPUDIR)/imx-common/libimx-common.o
endif
ifeq ($(SOC),mx6)
LIBS += $(CPUDIR)/imx-common/libimx-common.o
endif

ifeq ($(SOC),s5pc1xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
ifeq ($(SOC),exynos)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif

LIBS := $(addprefix $(obj),$(sort $(LIBS)))
.PHONY : $(LIBS)

LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))

# Add GCC lib
ifdef USE_PRIVATE_LIBGCC
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/libgcc.o
else
PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
endif
else
PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
endif
PLATFORM_LIBS += $(PLATFORM_LIBGCC)
export PLATFORM_LIBS

# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS +=     -include $(TOPDIR)/include/u-boot/u-boot.lds.h     -DCPUDIR=$(CPUDIR)     $(shell $(LD) --version |       sed -ne ‘s/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p‘)

__OBJS := $(subst $(obj),,$(OBJS))
__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))

#########################################################################
#########################################################################

ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
BOARD_SIZE_CHECK =     @actual=`wc -c [email protected] | awk ‘{print $$1}‘`;     limit=$(CONFIG_BOARD_SIZE_LIMIT);     if test $$actual -gt $$limit; then         echo "[email protected] exceeds file size limit:";         echo "  limit:  $$limit bytes";         echo "  actual: $$actual bytes";         echo "  excess: $$((actual - limit)) bytes";         exit 1;     fi
else
BOARD_SIZE_CHECK =
endif

# Always append ALL so that arch config.mk‘s can add custom ones
ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map

ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin

all:        $(ALL-y) $(SUBDIR_EXAMPLES)

$(obj)u-boot.dtb:    $(obj)u-boot
        $(MAKE) -C dts binary
        mv $(obj)dts/dt.dtb [email protected]

$(obj)u-boot-dtb.bin:    $(obj)u-boot.bin $(obj)u-boot.dtb
        cat $^ >[email protected]

$(obj)u-boot.hex:    $(obj)u-boot
        $(OBJCOPY) ${OBJCFLAGS} -O ihex $< [email protected]

$(obj)u-boot.srec:    $(obj)u-boot
        $(OBJCOPY) -O srec $< [email protected]

$(obj)u-boot.bin:    $(obj)u-boot
        $(OBJCOPY) ${OBJCFLAGS} -O binary $< [email protected]
        $(BOARD_SIZE_CHECK)

$(obj)u-boot.ldr:    $(obj)u-boot
        $(CREATE_LDR_ENV)
        $(LDR) -T $(CONFIG_BFIN_CPU) -c [email protected] $< $(LDR_FLAGS)
        $(BOARD_SIZE_CHECK)

$(obj)u-boot.ldr.hex:    $(obj)u-boot.ldr
        $(OBJCOPY) ${OBJCFLAGS} -O ihex $< [email protected] -I binary

$(obj)u-boot.ldr.srec:    $(obj)u-boot.ldr
        $(OBJCOPY) ${OBJCFLAGS} -O srec $< [email protected] -I binary

$(obj)u-boot.img:    $(obj)u-boot.bin
        $(obj)tools/mkimage -A $(ARCH) -T firmware -C none         -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0         -n $(shell sed -n -e ‘s/.*U_BOOT_VERSION//p‘ $(VERSION_FILE) |             sed -e ‘s/"[     ]*$$/ for $(BOARD) board"/‘)         -d $< [email protected]

$(obj)u-boot.imx:       $(obj)u-boot.bin
        $(obj)tools/mkimage -n  $(CONFIG_IMX_CONFIG) -T imximage         -e $(CONFIG_SYS_TEXT_BASE) -d $< [email protected]

$(obj)u-boot.kwb:       $(obj)u-boot.bin
        $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage         -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< [email protected]

$(obj)u-boot.sha1:    $(obj)u-boot.bin
        $(obj)tools/ubsha1 $(obj)u-boot.bin

$(obj)u-boot.dis:    $(obj)u-boot
        $(OBJDUMP) -d $< > [email protected]

$(obj)u-boot.ubl:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
        $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
        cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
        $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage         -e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
        rm $(obj)u-boot-ubl.bin
        rm $(obj)spl/u-boot-spl-pad.bin

$(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
        $(obj)tools/mkimage -s -n /dev/null -T aisimage             -e $(CONFIG_SPL_TEXT_BASE)             -d $(obj)spl/u-boot-spl.bin             $(obj)spl/u-boot-spl.ais
        $(OBJCOPY) ${OBJCFLAGS} -I binary             --pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary             $(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais
        cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin >             $(obj)u-boot.ais
        rm $(obj)spl/u-boot-spl{,-pad}.ais

$(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
        elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd             -o $(obj)u-boot.sb

ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT =         cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds             -Wl,--start-group $(__LIBS) -Wl,--end-group             $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
else
GEN_UBOOT =         UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) |         sed  -n -e ‘s/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p‘|sort|uniq`;        cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS)             --start-group $(__LIBS) --end-group $(PLATFORM_LIBS)             -Map u-boot.map -o u-boot
endif

$(obj)u-boot:    depend         $(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
        $(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
        smap=`$(call SYSTEM_MAP,u-boot) |             awk ‘$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}‘` ;         $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\""             -c common/system_map.c -o $(obj)common/system_map.o
        $(GEN_UBOOT) $(obj)common/system_map.o
endif

$(OBJS):    depend
        $(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),[email protected],$(notdir [email protected]))

$(LIBS):    depend $(SUBDIR_TOOLS)
        $(MAKE) -C $(dir $(subst $(obj),,[email protected]))

$(LIBBOARD):    depend $(LIBS)
        $(MAKE) -C $(dir $(subst $(obj),,[email protected]))

$(SUBDIRS):    depend
        $(MAKE) -C [email protected] all

$(SUBDIR_EXAMPLES): $(obj)u-boot

$(LDSCRIPT):    depend
        $(MAKE) -C $(dir [email protected]) $(notdir [email protected])

$(obj)u-boot.lds: $(LDSCRIPT)
        $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >[email protected]

nand_spl:    $(TIMESTAMP_FILE) $(VERSION_FILE) depend
        $(MAKE) -C nand_spl/board/$(BOARDDIR) all

$(obj)u-boot-nand.bin:    nand_spl $(obj)u-boot.bin
        cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin

onenand_ipl:    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
        $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all

$(obj)u-boot-onenand.bin:    onenand_ipl $(obj)u-boot.bin
        cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin

$(obj)spl/u-boot-spl.bin:    $(SUBDIR_TOOLS) depend
        $(MAKE) -C spl all

updater:
        $(MAKE) -C tools/updater all

# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
depend dep:    $(TIMESTAMP_FILE) $(VERSION_FILE)         $(obj)include/autoconf.mk         $(obj)include/generated/generic-asm-offsets.h         $(obj)include/generated/asm-offsets.h
        for dir in $(SUBDIRS) $(CPUDIR) $(LDSCRIPT_MAKEFILE_DIR) ; do             $(MAKE) -C $$dir _depend ; done

TAG_SUBDIRS = $(SUBDIRS)
TAG_SUBDIRS += $(dir $(__LIBS))
TAG_SUBDIRS += include

FIND := find
FINDFLAGS := -L

checkstack:
        $(CROSS_COMPILE)objdump -d $(obj)u-boot             `$(FIND) $(obj) -name u-boot-spl -print` |             perl $(src)tools/checkstack.pl $(ARCH)

tags ctags:
        ctags -w -o $(obj)ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS)                         -name ‘*.[chS]‘ -print`

etags:
        etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS)                         -name ‘*.[chS]‘ -print`
cscope:
        $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name ‘*.[chS]‘ -print >                         cscope.files
        cscope -b -q -k

SYSTEM_MAP =         $(NM) $1 |         grep -v ‘\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)‘ |         LC_ALL=C sort
$(obj)System.map:    $(obj)u-boot
        @$(call SYSTEM_MAP,$<) > $(obj)System.map

#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
    @$(XECHO) Generating [email protected] ;     set -e ;     : Generate the dependancies ;     $(CC) -x c -DDO_DEPS_ONLY -M $(CFLAGS) $(CPPFLAGS)         -MQ $(obj)include/autoconf.mk include/common.h > [email protected]

$(obj)include/autoconf.mk: $(obj)include/config.h
    @$(XECHO) Generating [email protected] ;     set -e ;     : Extract the config macros ;     $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h |         sed -n -f tools/scripts/define2mk.sed > [email protected] &&     mv [email protected] [email protected]

$(obj)include/generated/generic-asm-offsets.h:    $(obj)include/autoconf.mk.dep     $(obj)lib/asm-offsets.s
    @$(XECHO) Generating [email protected]
    tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s [email protected]

$(obj)lib/asm-offsets.s:    $(obj)include/autoconf.mk.dep     $(src)lib/asm-offsets.c
    @mkdir -p $(obj)lib
    $(CC) -DDO_DEPS_ONLY         $(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR))         -o [email protected] $(src)lib/asm-offsets.c -c -S

$(obj)include/generated/asm-offsets.h:    $(obj)include/autoconf.mk.dep     $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
    @echo Generating [email protected]
    tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s [email protected]

$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s:    $(obj)include/autoconf.mk.dep
    @mkdir -p $(obj)$(CPUDIR)/$(SOC)
    if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then         $(CC) -DDO_DEPS_ONLY         $(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR))             -o [email protected] $(src)$(CPUDIR)/$(SOC)/asm-offsets.c -c -S;     else         touch [email protected];     fi

#########################################################################
else    # !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot $(filter-out tools,$(SUBDIRS)) updater depend dep tags ctags etags cscope $(obj)System.map:
    @echo "System not configured - see README" >&2
    @ exit 1

tools: $(VERSION_FILE) $(TIMESTAMP_FILE)
    $(MAKE) -C [email protected] all
endif    # config.mk

$(VERSION_FILE):
        @mkdir -p $(dir $(VERSION_FILE))
        @( localvers=‘$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))‘ ;            printf ‘#define PLAIN_VERSION "%s%s"\n‘             "$(U_BOOT_VERSION)" "$${localvers}" ;            printf ‘#define U_BOOT_VERSION "U-Boot %s%s"\n‘             "$(U_BOOT_VERSION)" "$${localvers}" ;         ) > [email protected]
        @( printf ‘#define CC_VERSION_STRING "%s"\n‘          ‘$(shell $(CC) --version | head -n 1)‘ )>>  [email protected]
        @( printf ‘#define LD_VERSION_STRING "%s"\n‘          ‘$(shell $(LD) -v | head -n 1)‘ )>>  [email protected]
        @cmp -s [email protected] [email protected] && rm -f [email protected] || mv -f [email protected] [email protected]

$(TIMESTAMP_FILE):
        @mkdir -p $(dir $(TIMESTAMP_FILE))
        @LC_ALL=C date +‘#define U_BOOT_DATE "%b %d %C%y"‘ > [email protected]
        @LC_ALL=C date +‘#define U_BOOT_TIME "%T"‘ >> [email protected]
        @cmp -s [email protected] [email protected] && rm -f [email protected] || mv -f [email protected] [email protected]

easylogo env gdb:
    $(MAKE) -C tools/[email protected] all MTD_VERSION=${MTD_VERSION}
gdbtools: gdb

tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE)
    $(MAKE) -C tools HOST_TOOLS_ALL=y

.PHONY : CHANGELOG
CHANGELOG:
    git log --no-merges U-Boot-1_1_5.. |     unexpand -a | sed -e ‘s/\s\s*$$//‘ > [email protected]

include/license.h: tools/bin2header COPYING
    cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
#########################################################################

unconfig:
    @rm -f $(obj)include/config.h $(obj)include/config.mk         $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp         $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep

%_config::    unconfig
    @$(MKCONFIG) -A $(@:_config=)

sinclude $(obj).boards.depend
$(obj).boards.depend:    boards.cfg
    @awk ‘(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }‘ $< > [email protected]

#
# Functions to generate common board directory names
#
lcname    = $(shell echo $(1) | sed -e ‘s/\(.*\)_config/\L\1/‘)
ucname    = $(shell echo $(1) | sed -e ‘s/\(.*\)_config/\U\1/‘)

#========================================================================
# ARM
#========================================================================

SX1_stdout_serial_config SX1_config:        unconfig
    @mkdir -p $(obj)include
    @if [ "$(findstring _stdout_serial_, [email protected])" ] ; then         echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ;     else         echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ;     fi;
    @$(MKCONFIG) -n [email protected] SX1 arm arm925t sx1

#########################################################################
## ARM1176 Systems
#########################################################################
smdk6400_noUSB_config    smdk6400_config    :    unconfig
    @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
    @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
    @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
    @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
    @if [ -z "$(findstring smdk6400_noUSB_config,[email protected])" ]; then                    echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;    else                                                echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;    fi
    @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
    @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk

#########################################################################
#########################################################################

clean:
    @rm -f $(obj)examples/standalone/82559_eeprom                         $(obj)examples/standalone/atmel_df_pow2                         $(obj)examples/standalone/eepro100_eeprom                     $(obj)examples/standalone/hello_world                         $(obj)examples/standalone/interrupt                         $(obj)examples/standalone/mem_to_mem_idma2intr                     $(obj)examples/standalone/sched                             $(obj)examples/standalone/smc911{11,x}_eeprom                     $(obj)examples/standalone/test_burst                         $(obj)examples/standalone/timer
    @rm -f $(obj)examples/api/demo{,.bin}
    @rm -f $(obj)tools/bmp_logo       $(obj)tools/easylogo/easylogo             $(obj)tools/env/{fw_printenv,fw_setenv}                         $(obj)tools/envcrc                                 $(obj)tools/gdb/{astest,gdbcont,gdbsend}                         $(obj)tools/gen_eth_addr    $(obj)tools/img2srec                     $(obj)tools/mk{env,}image   $(obj)tools/mpc86x_clk                 $(obj)tools/mk{smdk5250,}spl                             $(obj)tools/ncb           $(obj)tools/ubsha1
    @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}                 $(obj)board/matrix_vision/*/bootscript.img                     $(obj)board/voiceblue/eeprom                              $(obj)u-boot.lds                                     $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]                 $(obj)arch/blackfin/cpu/init.{lds,elf}
    @rm -f $(obj)include/bmp_logo.h
    @rm -f $(obj)include/bmp_logo_data.h
    @rm -f $(obj)lib/asm-offsets.s
    @rm -f $(obj)include/generated/asm-offsets.h
    @rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
    @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
    @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
    @rm -f $(ONENAND_BIN)
    @rm -f $(obj)onenand_ipl/u-boot.lds
    @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
    @rm -f $(obj)MLO
    @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
    @find $(OBJTREE) -type f         \( -name ‘core‘ -o -name ‘*.bak‘ -o -name ‘*~‘ -o -name ‘*.su‘         -o -name ‘*.o‘    -o -name ‘*.a‘ -o -name ‘*.exe‘    \) -print         | xargs rm -f

# Removes everything not needed for testing u-boot
tidy:    clean
    @find $(OBJTREE) -type f \( -name ‘*.depend*‘ \) -print | xargs rm -f

clobber:    tidy
    @find $(OBJTREE) -type f \( -name ‘*.srec‘         -o -name ‘*.bin‘ -o -name u-boot.img \)         -print0 | xargs -0 rm -f
    @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS         $(obj)cscope.* $(obj)*.*~
    @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
    @rm -f $(obj)u-boot.kwb
    @rm -f $(obj)u-boot.imx
    @rm -f $(obj)u-boot.ubl
    @rm -f $(obj)u-boot.ais
    @rm -f $(obj)u-boot.dtb
    @rm -f $(obj)u-boot.sb
    @rm -f $(obj)tools/inca-swap-bytes
    @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
    @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
    @rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
    @rm -fr $(obj)include/generated
    @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
    @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
    @rm -f $(obj)dts/*.tmp

mrproper distclean:    clobber unconfig
ifneq ($(OBJTREE),$(SRCTREE))
    rm -rf $(obj)*
endif

backup:
    F=`basename $(TOPDIR)` ; cd .. ;     gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F

#########################################################################

　　

时间： 2024-10-18 21:08:36

Uboot makefile 解读的相关文章

Tiny4412 uboot Makefile 分析

* Build uboot a) 安装好toolchain (arm-linux-gcc-4.5.1-v6-vfp-20120301.tgz)并设置好 环境变量PATH,保证可以正常使用.b) 解压 uboot_tiny4412-20130729.tgz 并进入相应的目录 tar xzf uboot_tiny4412-20130729.tgzc) 配置 uboot 并编译 cd uboot_tiny4412 make tiny4412_config maked) 编译 用于生成bl2 的工具 m

Uboot makefile学习记录

U-BOOT顶层makefile与linux的顶层mkefile不同,每个板有一个配置定义,如下,需要先配置后,才能makeforlinx_nand_ram256_config :  unconfig    @$(MKCONFIG) smdk6410 arm s3c64xx smdk6410 samsung s3c6410 NAND ram256 其通过./mkconfig脚本生成include/config.mk文件,include/config.h和/board/samsung/smdk64

U-Boot Makefile编译

对于mini2440开发板,编译U-Boot需要执行如下的命令: $  make  mini2440_config $  make  all 使用上面的命令编译U-Boot,编译生成的所有文件都保存在源代码目录中.为了保持源代码目录的干净,可以使用如下命令将编译生成的文件输出到一个外部目录,而不是在源代码目录中,下面的2种方法都将编译生成的文件输出到 /tmp/build目录: $  export  BUILD_DIR=/tmp/build $  make  mini2440_config $ 

U-Boot Makefile 文件详细分析

1. Makefile到底做了什么 之前看了网上许多牛人写的关于Makefile的解析的文章,在这里,我也结合我个人的理解,去分析U-Boot的Makefile. 首先,我们大致了解一下,Makefile到底做了些什么工作?其实,顶层Makefile的主要任务就是组织整个U-Boot工程的编译,概括可以分为以下几个步骤: 首先通过执行make *_config传入$(@:_config=), ARCH, CPU, BOARD, VENDOR, SOC参数(一共六个参数但不一定同时存在),给mkc

uboot 信息解读

baudrate=115200 bootargs=console=ttySAC0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwaitbootcmd=if mmc rescan ${mmcdev}; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmcboot; else run nandboot; fi; fi; else

I.MX6 U-Boot mkconfig hacking

/**************************************************************************** * I.MX6 U-Boot mkconfig hacking * 声明: * 本文主要是为了知道U-Boot中的mkconfig是如何工作的,是如何将配置 * 中的内容进行汇总,同时又将这些内容放在了什么地方. * * 2015-12-19 深圳 南山区平山村 曾剑锋 ************************************

图像识别DM8127开发攻略——UBOOT的移植说明

图像识别DM8127开发攻略--UBOOT的移植说明 根据前几篇文章的介绍,想必大家对DM8127软件架构有了全局的认识,下面我们从开发的角度进行裁剪移植最基本的BOOT软件包,嵌入式开发人员拿到一个新的板子,就是要如何让板子能跑得起自己编译和移植的程序,这才有价值,否则直接拿别人的BIN文件直接烧写到板子上没啥意思. 一.DM8127 UBOOT编译说明DM8127 的UBOOT的版本是u-boot-2010.06, UBOOT代码 和 以前的DM6446-DM368-DM3730平台稍微不同

4、uboot对设备树的支持

第01节_传递dtb给内核 : r2 a. u-boot中内核启动命令: bootm <uImage_addr> // 无设备树,bootm 0x30007FC0 bootm <uImage_addr> <initrd_addr> <dtb_addr> // 有设备树 比如 : nand read.jffs2 0x30007FC0 kernel; // 读内核uImage到内存0x30007FC0 nand read.jffs2 32000000 devic

makefile 函数

1. findstring $(findstring <find>, <in>) 从 in 中查找 find ,如果找到则返回find,否则返回空 str1=1111 str2=11222 all: @echo $(findstring $(str1), $(str2)) 示例 uboot makefile是否编译 # Allow for silent builds ifeq (,$(findstring s,$(MAKEFLAGS))) XECHO = echo else XEC