一、环境准备
1、操作系统配置
关闭selinux，并重启系统。
[[email protected] ~]# cat /etc/sysconfig/selinux
SELINUX=disabled
2、安装所需的包
[[email protected] ~]# yum -y install vim git python-setuptools
yum安装的pip包版本不对，安装时会出错，从网上下载pip源码包，源码安装pip包
pip源我们采用系统默认的源就好，安装pip源码
[[email protected] ~]# tar xvzf pip-6.0.8.tar.gz
[[email protected] ~]# cd pip-6.0.8
[[email protected] pip-6.0.8]# python setup.py install
有一个rpm包，yum源里面没有，需要下载下来手工安装，否则安装时会报错，命令如下：
rpm -ivh python-mox-0.5.3-1.3.x86_64.rpm
二、获取源码
[[email protected] pip-6.0.8]# cd /home/
[[email protected] home]# git clone -b stable/icehouse https://github.com/openstack-dev/devstack.git
创建stack用户
[[email protected] home]# cd devstack/tools/
[[email protected] tools]# ./create-stack-user.sh
Creating a group called stack
Creating a user called stack
Giving stack user passwordless sudo privileges
为home/devstack目录赋给stack用户可执行权限
[[email protected] tools]# chown -R stack:stack /home/devstack/
三、开始安装
[[email protected] ~]# su stack
[[email protected] root]$ cd /home/devstack/
编辑本目录下的localrc文件，然后执行安装
[[email protected] devstack]$ ./stack.sh
我的localrc文件如下：
HOST_IP=*.*.*.*
DATABASE_PASSWORD=123456
ADMIN_PASSWORD=123456
SERVICE_PASSWORD=123456
SERVICE_TOKEN=123456
RABBIT_PASSWORD=123456
# Reclone each time
RECLONE=true
# Python enviroments
#OFFLINE=true
## For Keystone
KEYSTONE_TOKEN_FORMAT=PKI
# Enable Logging
LOGFILE=/opt/stack/logs/stack.sh.log
VERBOSE=True
LOG_COLOR=True
SCREEN_LOGDIR=/opt/stack/logs
# Pre-requisite
ENABLED_SERVICES=rabbit,mysql,key
# Horizon (Dashboard UI) - (always use the trunk)
ENABLED_SERVICES+=,horizon
#HORIZON_REPO=https://github.com/openstack/horizon
#HORIZON_BRANCH=master
# Nova - Compute Service
ENABLED_SERVICES+=,n-api,n-crt,n-obj,n-cpu,n-cond,n-sch,n-novnc,n-cauth
IMAGE_URLS+=",https://launchpad.net/cirros/trunk/0.3.0/+download/cirros-0.3.0-x86_64-disk.img"
## Nova Cells
#ENABLED_SERVICES+=,n-cell
# Glance - Image Service
ENABLED_SERVICES+=,g-api,g-reg
# Neutron - Networking Service
# If Neutron is not declared the old good nova-network will be used
ENABLED_SERVICES+=,q-svc,q-agt,q-dhcp,q-l3,q-meta,neutron
## Neutron - Load Balancing
ENABLED_SERVICES+=,q-lbaas
## Neutron - VPN as a Service
ENABLED_SERVICES+=,q-vpn
## Neutron - Firewall as a Service
ENABLED_SERVICES+=,q-fwaas
# VLAN configuration - LinuxBridge + VLAN模式
Q_PLUGIN=linuxbridge
ENABLE_TENANT_VLANS=True
TENANT_VLAN_RANGE=1:4094
PHYSICAL_NETWORK=default
LB_PHYSICAL_INTERFACE=eth0
# Cinder - Block Device Service
VOLUME_GROUP="cinder-volumes"
ENABLED_SERVICES+=,cinder,c-api,c-vol,c-sch
# Apache fronted for WSGI
APACHE_ENABLED_SERVICES+=keystone
#APACHE_ENABLED_SERVICES+=keystone,swift
安装过程中有如下报错：
Loaded plugins: fastestmirror, refresh-packagekit
Using mysql database backend
Traceback (most recent call last):
File "/home/devstack/tools/outfilter.py", line 24, in <module>
import argparse
ImportError: No module named argparse
[[email protected] devstack]$ sudo pip install argparse
You are using pip version 6.0.8, however version 7.0.1 is available.
You should consider upgrading via the ‘pip install --upgrade pip‘ command.
Collecting argparse
Downloading argparse-1.3.0-py2.py3-none-any.whl
Installing collected packages: argparse
Successfully installed argparse-1.3.0
根据错误提示需要将pip升级到7.0.1版本,升级后重新执行安装脚本
[[email protected] devstack]$ sudo pip install --upgrade pip
[[email protected] devstack]$ ./stack.sh
安装过程中可能会遇到各种问题，根据报错信息，一一解决即可
出现下面提示，表示安装完成
Horizon is now available at http://*.*.*.*/
Keystone is serving at http://*.*.*.*:5000/v2.0/
Examples on using novaclient command line is in exercise.sh
The default users are: admin and demo
The password: 123456
This is your host ip: *.*.*.*
然后可以通过horizon登陆系统。