[emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)错误原因

nginx重启报错：[emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)

原因：这个是nginx重启时经常遇到的，这个是nginx重复重启导致自己占用了端口。（一般可能是因为自己设置了开机自动启动，或者重复启动）

解决方法 ： killall -9 nginx 杀掉nginx 的进程  然后重启（service nginx restart 或 sudo /usr/local/nginx/sbin/nginx）

版权声明：本文为博主原创文章，未经博主允许不得转载。

时间： 2025-01-06 01:13:07

[emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)错误原因的相关文章

nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) 错误解决

今天在做LNMP的时候,启动nginx服务,无法开启,导致网页打不开.把服务从起一下发现提示错误如下: Starting nginx: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)nginx: [emerg] bind() to 0.0.0.0:80 fai

修改nignx报错Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)

Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) 这个错误是修改了nginx的配置时出现,表名80端口被程序占用 列出所有端口: netstat –ntlp 发现端口是被nginx本身占用了,于是关闭占用80端口的程序 sudo fuser -k 80/tcp 之后开启nginx无异常 使用linux一键安装包安装的环境 http://lnmp.org/

Linux教程之：Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)

Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) 使用命令关闭占用80端口的程序 sudo fuser -k 80/tcp 互联网+时代,时刻要保持学习,携手千锋PHP-PHP培训的实力派,Dream It Possible.

nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)

nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) 报错信息 nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] socket() [::]:80 failed (97: Address family not supported by protocol) 1 2 定位方法 1.先使用p

nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)解决

nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) 报错信息 nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)nginx: [emerg] socket() [::]:80 failed (97: Address family not supported by protocol)定位方法 1.先使用ps -e |

bind() to 0.0.0.0:80 failed (98: Address already in use)

You can kill it using: sudo fuser -k 80/tcp And then try restarting nginx again: service nginx start

nginx [emerg] socket() []80 failed (97 Address family not supported by protocol)

1.nginx报错信息 早上通过LNMP部署owncloud 10.0.2的云盘环境,修改nginx配置文件后,重启报错:nginx: [emerg] socket() [::]:80 failed (97: Address family not supported by protocol) 2.分析并解决报错 看到 socket() [::]:80 failed,第一反应就是好像与IPV6有关,Address family not supported by protocol也进一步印证了我的想

nginx: [emerg] bind() to 0.0.0.0:80 failed (48: Address already in use)

Mac上启动nginx报如上错误,原因是80端口已被占用,可能有些服务未能成功关闭. 解决:键入命令 sudo nginx -s stop ( 或 sudo nginx -s  quit) ,然后 sudo nginx 重启nginx. 如果是因为其他服务占用了 80端口,如apache服务等,就把对应服务关掉(sudo apachectl stop) .

阿里云ECS在CentOS 6.9中使用Nginx提示：nginx: [emerg] socket() [::]:80 failed (97: Address family not supported by protocol)的解决方法

说明: 1.[::]:80这个是IPv6的地址. 2.阿里云截至到今天还不支持IPv6. 解决方式: 1.普通解决方式:开启IPv6的支持,不过这个方法在阿里云行不通. vim /etc/nginx/conf.d/default.conf #找到并替换为以下: listen 80; listen [::]:80 ipv6only=on default_server; 2.极端方式:直接屏蔽IPv6,全部服务器都适用. vim /etc/nginx/conf.d/default.conf #找到并