1.列出主机的storage信息
命令：
esxcli storage nmp device list
mpx.vmhba1:C0:T1:L0
Device Display Name: Local VMware, Disk (mpx.vmhba1:C0:T1:L0)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba1:C0:T1:L0;current=vmhba1:C0:T1:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba1:C0:T1:L0
Is Local SAS Device: false
Is USB: false
Is Boot USB Device: false
2. 请记下与设备关联的SATP （Storage Array Type: VMW_SATP_LOCAL）
3. 添加PSA声明规则将设备标记为SSD。
命令：
esxcli storage nmp satp rule add -s VMW_SATP_LOCAL --device mpx.vmhba1:C0:T1:L0 --option="enable_ssd"
4. 回收设备，重新应用规则。
命令：
esxcli storage core claimrule load
esxcli storage core claimrule run
esxcli storage core claiming reclaim --device mpx.vmhba1:C0:T1:L0
5.验证设备是否已标记为SSD （IS SSD：true）
命令：
esxcli storage core device list -d mpx.vmhba1:C0:T1:L0 | grep SSD