Bringing up interface eth0: Determining if ip address 10.109.67.81 is already in use for device eth0...

重启网卡出现提示：
Bringing up interface eth0:  Determining if ip address 10.109.67.81 is already in use for device eth0...
                                                           [  OK  ]
Bringing up interface eth1:  Determining if ip address 10.109.67.83 is already in use for device eth1...
                                                           [  OK  ]

该警告一般是由于网卡解析arp协议导致的，可在网卡的配置文件中加入ARPCHECK=NO参数来屏蔽该检查
[[email protected] ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
TYPE=Ethernet
BOOTPROTO=none
IPADDR=10.109.67.81
PREFIX=24
GATEWAY=10.109.67.254
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME=eth0
UUID=86d44060-4579-48cc-b85b-219a206ca37c
ONBOOT=yes
HWADDR=00:50:56:95:09:76
LAST_CONNECT=1411004329
ARPCHECK=no

再次启动网卡，一切正常
[[email protected] ~]# service network restart
Shutting down interface eth0:                              [  OK  ]
Shutting down interface eth1:                              [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:                                [  OK  ]
Bringing up interface eth1:                                [  OK  ]

时间： 2024-12-28 15:08:15

Bringing up interface eth0: Determining if ip address 10.109.67.81 is already in use for device eth0...的相关文章

linux/centos6.5 network提示Determining if ip address * is already in use for device eth0

系统:centos 6.5 今天,在重启网卡的时候发现了如下的问题 [[email protected] ~]# service network restart 正在关闭接口 eth0: [确定] 关闭环回接口: [确定] 弹出环回接口: [确定] 弹出界面 eth0: Determining if ip address 192.168.100.201 is already in use for device eth0... [确定] 开始以为是IP地址冲突了,但是经排查,发现就只有这台服务器上

Linux下network提示Determining if ip address

[[email protected] NetworkManager]# service network restart正在关闭接口 eth0: [确定]关闭环回接口: [确定]弹出环回接口: [确定]弹出界面 eth0: Determining if ip address 192.168.8.102 is already in use for device eth0... vi /etc/sysconfig/network-scripts/ifcfg-eth0 添加   ARPCHECK=no

Determining if ip address is already in use for device eth0

系统重启网络服务会提示Determining if ip address is already in use for device eth0提示. 但是使用又没有问题呢,那么怎么关闭这个显示呢,Linux下network提示Determining if ip address 系统版本:Red Hat Enterprise Linux Server release 6.8 (Santiago) 问题现象 重启网卡的时候会提示,(如果有多块网卡会提示多条信息)弹出界面如下: [[email prot

how to find out the switch port by IP address

Subject: How to find out the port number by IP address Solution: In core switch, ping  the IP address, Ex: [email protected]#ping 10.20.12.111 Sending 1, 16-byte ICMP Echo to 10.20.12.111, timeout 5000 msec, TTL 64 Type Control-c to abort Reply from

“Device eth0 has different MAC address than expected, ignoring.”问题

配IP后进行激活的时候提示如下错误:("Device eth0 has different MAC address than expected, ignoring.") 百度了下,问题解决. 问题原因: 配置文件里的MAC地址和真实的MAC不一样. 含有MAC信息的配置文件是/etc/sysconfig/network-scripts/ifcfg-eth0. 查看本机实际MAC的命令是 ifconfig eth0 解决办法: 1.查看配置文件/etc/sysconfig/network

?vmware虚拟机centos网络配置错误，执行/etc/init.d/network start 或 restart 提示Device eth0 has different MAC address than expected, ignoring

vmware虚拟机centos网络配置错误,执行/etc/init.d/network start 或 restart 提示Device eth0 has different MAC address than expected, ignoring 解决方法: 执行:grep -rHi eth0 /etc/udev/rules.d/ It will probably show you a file that has a udev rewrite rule for the eth0 and has

虚拟机CentOS复制到其他主机vm下IP地址无效（Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization)

Bringing up interface eth0:  Device eth0 does not seem to be present, delaying initialization 在虚拟机VM下安装的CentOS遇到这个问题,我是将centos.vmx放到其他的VM下打开 #dhclient #service network restart Shutting down loopback insterface:                                        

问题:Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]—— 找不到网卡。

克隆虚拟机的时候或其他情况出现以下问题(命令service network restart): Bringing up interface eth0:  Device eth0 does not seem to be present,delaying initialization.                    [FAILED] 1.造成的原因: 第一次创建的时候,在文件: /etc/sysconfig/network-scripts/ifcfg-eth0 里面设定了网卡0绑定了MAC地

如何解决虚拟机克隆导致"Bringing up interface eth0: Error: No suitable device found: no device found for connection 'System eth0'."

在VMware的虚拟机中克隆CentOS,在重启网卡的时候报错: Bringing up interface eth0:  Error: No suitable device found: no device found for connection 'System eth0'. Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: E