oracle11.2静默安装

操作系统及Oracle版本

Linux版本：rhel-server-5.8-x86_64-dvd

Oracle版本：Oracle Database 11g Release 2 (11.2.0.4.0) for Linux x86-64 (p13390677_112040_Linux-x86-64_1of7.zip、p13390677_112040_Linux-x86-64_2of7.zip)

硬件检测：

物理内存不少于1G

硬盘可以空间不少于5G

swap分区空间不少于2G

支持256色以上显卡

cpu主频不小于550mHZ

cat /etc/issue

uname -r

grep MemTotal /proc/meminfo

grep SwapTotal /proc/meminfo

grep "model name" /proc/cpuinfo

free

df -k /tmp

df -k

User Accounts

1. Create OS groups using the command below. Enter these commands as the ‘root‘ user:

#/usr/sbin/groupadd -g 501 oinstall

#/usr/sbin/groupadd -g 502 dba

2. Create the users that will own the Oracle software using the commands:

#/usr/sbin/useradd -u 502 -g oinstall -G dba  oracle

3. Set the password for the oracle account using the following command. Replace password with your own

password.

passwd oracle

Configuring Kernel Parameters

vi /etc/sysctl.conf

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

fs.file-max = 6553600

net.ipv4.ip_local_port_range = 9000 65500

net.core.rmem_default = 262144

net.core.rmem_max = 4194304

net.core.wmem_default = 262144

net.core.wmem_max = 1048576

fs.aio-max-nr = 1048576

 

#/sbin/sysctl –p

 

Set shell limits for the oracle user

1. Add the following lines to the /etc/security/limits.conf file:

vi /etc/security/limits.conf

oracle soft nproc 2047

oracle hard nproc 16384

oracle soft nofile 1024

oracle hard nofile 65536

2. Add or edit the following line in the /etc/pam.d/login file, if it does not already exist:

session required pam_limits.so

3. Make the following changes to the default shell startup file, add the following lines to the /etc/profile file:

if [ $USER = "oracle" ]; then

        if [ $SHELL = "/bin/ksh" ]; then

              ulimit -p 16384

              ulimit -n 65536

        else

              ulimit -u 16384 -n 65536

        fi

fi

Create the Oracle Inventory Directory

# mkdir -p /u01/app/oraInventory

# chown -R grid:oinstall /u01/app/oraInventory

# chmod -R 775 /u01/app/oraInventory

 

Creating the Oracle Grid Infrastructure Home Directory

# mkdir -p / oracle

# mkdir / oracle/cfgtoollogs --needed to ensure that dbca is able to run after the rdbms installation.

# chown -R oracle:oinstall /oracle

# chmod -R 775 /oracle

Check OS Software Requirements

binutils-2.15.92.0.2

compat-libstdc++-33-3.2.3

compat-libstdc++-33-3.2.3 (32 bit)

elfutils-libelf-0.97

elfutils-libelf-devel-0.97

expat-1.95.7

gcc-3.4.6

gcc-c++-3.4.6

glibc-2.3.4-2.41

glibc-2.3.4-2.41 (32 bit)

glibc-common-2.3.4

glibc-devel-2.3.4

glibc-headers-2.3.4

libaio-0.3.105

libaio-0.3.105 (32 bit)

libaio-devel-0.3.105

libaio-devel-0.3.105 (32 bit)

libgcc-3.4.6

libgcc-3.4.6 (32-bit)

libstdc++-3.4.6

libstdc++-3.4.6 (32 bit)

libstdc++-devel 3.4.6

make-3.80

pdksh-5.2.14

sysstat-5.0.5

unixODBC-2.2.11

unixODBC-2.2.11 (32 bit)

unixODBC-devel-2.2.11

unixODBC-devel-2.2.11 (32 bit)

 

The following command can be run on the system to list the currently installed packages:

rpm -q --qf ‘%{NAME}-%{VERSION}-%{RELEASE} (%{ARCH})\n‘ binutils \

compat-libstdc++-33 \

elfutils-libelf \

elfutils-libelf-devel \

gcc \

gcc-c++ \

glibc \

glibc-common \

glibc-devel \

glibc-headers \

ksh \

libaio \

libaio-devel \

libgcc \

libstdc++ \

libstdc++-devel \

make \

sysstat \

unixODBC \

unixODBC-devel

 

 

如果提示没有安装，那就把没有的包打上去

 

 

 

配置环境变量：

vi .bash_profile

export PATH

export ORACLE_BASE=/ oracle

export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1

export ORACLE_SID=orcl

export PATH=$ORACLE_HOME/bin:$HOME/bin:$PATH

复制响应文件模板

mkdir etc

cp /home/oracle/database/response/* /home/oracle/etc/

设置响应文件权限

su - root

chmod 700 /home/oracle/etc/*.rsp

[[email protected] ~]$ more /home/oracle/etc/db_install.rsp

####################################################################

## Copyright(c) Oracle Corporation 1998, 2013. All rights reserved.##

##                                                                ##

## Specify values for the variables listed below to customize     ##

## your installation.                                             ##

##                                                                ##

## Each variable is associated with a comment. The comment        ##

## can help to populate the variables with the appropriate        ##

## values.                                                        ##

##                                                                ##

## IMPORTANT NOTE: This file contains plain text passwords and    ##

## should be secured to have read permission only by oracle user  ##

## or db administrator who owns this installation.                ##

##                                                                ##

####################################################################

#-------------------------------------------------------------------------------

# Do not change the following system generated value.

#-------------------------------------------------------------------------------

oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0

#-------------------------------------------------------------------------------

# Specify the installation option.

# It can be one of the following:

#   - INSTALL_DB_SWONLY

#   - INSTALL_DB_AND_CONFIG

#   - UPGRADE_DB

#-------------------------------------------------------------------------------

oracle.install.option=INSTALL_DB_SWONLY

#-------------------------------------------------------------------------------

# Specify the hostname of the system as set during the install. It can be used

# to force the installation to use an alternative hostname rather than using the

# first hostname found on the system. (e.g., for systems with multiple hostnames

# and network interfaces)

#-------------------------------------------------------------------------------

ORACLE_HOSTNAME=frank

#-------------------------------------------------------------------------------

# Specify the Unix group to be set for the inventory directory.

#-------------------------------------------------------------------------------

UNIX_GROUP_NAME=oinstall

#-------------------------------------------------------------------------------

# Specify the location which holds the inventory files.

# This is an optional parameter if installing on

# Windows based Operating System.

#-------------------------------------------------------------------------------

INVENTORY_LOCATION=/oracle/oraInventory

#-------------------------------------------------------------------------------

# Specify the languages in which the components will be installed.

#

# en   : English                  ja   : Japanese

# fr   : French                   ko   : Korean

# ar   : Arabic                   es   : Latin American Spanish

# bn   : Bengali                  lv   : Latvian

# pt_BR: Brazilian Portuguese     lt   : Lithuanian

# bg   : Bulgarian                ms   : Malay

# fr_CA: Canadian French          es_MX: Mexican Spanish

# ca   : Catalan                  no   : Norwegian

# hr   : Croatian                 pl   : Polish

# cs   : Czech                    pt   : Portuguese

# da   : Danish                   ro   : Romanian

# nl   : Dutch                    ru   : Russian

# ar_EG: Egyptian                 zh_CN: Simplified Chinese

# en_GB: English (Great Britain)  sk   : Slovak

# et   : Estonian                 sl   : Slovenian

# fi   : Finnish                  es_ES: Spanish

# de   : German                   sv   : Swedish

# el   : Greek                    th   : Thai

# iw   : Hebrew                   zh_TW: Traditional Chinese

# hu   : Hungarian                tr   : Turkish

# is   : Icelandic                uk   : Ukrainian

# in   : Indonesian               vi   : Vietnamese

# it   : Italian

#

# all_langs   : All languages

#

# Specify value as the following to select any of the languages.

# Example : SELECTED_LANGUAGES=en,fr,ja

#

# Specify value as the following to select all the languages.

# Example : SELECTED_LANGUAGES=all_langs

#-------------------------------------------------------------------------------

SELECTED_LANGUAGES=en

#-------------------------------------------------------------------------------

# Specify the complete path of the Oracle Home.

#-------------------------------------------------------------------------------

ORACLE_HOME=/oracle/product/11.2.0/db_1

#-------------------------------------------------------------------------------

# Specify the complete path of the Oracle Base.

#-------------------------------------------------------------------------------

ORACLE_BASE=/oracle

#-------------------------------------------------------------------------------

# Specify the installation edition of the component.

#

# The value should contain only one of these choices.

#   - EE     : Enterprise Edition

#   - SE     : Standard Edition

#   - SEONE  : Standard Edition One

#   - PE     : Personal Edition (WINDOWS ONLY)

#-------------------------------------------------------------------------------

oracle.install.db.InstallEdition=EE

#-------------------------------------------------------------------------------

# This variable is used to enable or disable custom install and is considered

# only if InstallEdition is EE.

#

#   - true  : Components mentioned as part of ‘optionalComponents‘ property

#             are considered for install.

#   - false : Value for ‘optionalComponents‘ is not considered.

#-------------------------------------------------------------------------------

oracle.install.db.EEOptionsSelection=false

#-------------------------------------------------------------------------------

# This property is considered only if ‘EEOptionsSelection‘ is set to true

#

# Description: List of Enterprise Edition Options you would like to enable.

#

#              The following choices are available. You may specify any

#              combination of these choices.  The components you choose should

#              be specified in the form "internal-component-name:version"

#              Below is a list of components you may specify to enable.

#

#              oracle.oraolap:11.2.0.4.0 - Oracle OLAP

#              oracle.rdbms.dm:11.2.0.4.0 - Oracle Data Mining RDBMS Files

#              oracle.rdbms.dv:11.2.0.4.0- Oracle Database Vault option

#              oracle.rdbms.lbac:11.2.0.4.0 - Oracle Label Security

#              oracle.rdbms.partitioning:11.2.0.4.0 - Oracle Partitioning

#              oracle.rdbms.rat:11.2.0.4.0 - Oracle Real Application Testing

#-------------------------------------------------------------------------------

oracle.install.db.optionalComponents=

###############################################################################

#                                                                             #

# PRIVILEGED OPERATING SYSTEM GROUPS                                          #

# ------------------------------------------                                  #

# Provide values for the OS groups to which OSDBA and OSOPER privileges       #

# needs to be granted. If the install is being performed as a member of the   #

# group "dba", then that will be used unless specified otherwise below.       #

#                                                                             #

# The value to be specified for OSDBA and OSOPER group is only for UNIX based #

# Operating System.                                                           #

#                                                                             #

###############################################################################

#------------------------------------------------------------------------------

# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.

#-------------------------------------------------------------------------------

oracle.install.db.DBA_GROUP=dba

#------------------------------------------------------------------------------

# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.

# The value to be specified for OSOPER group is optional.

#------------------------------------------------------------------------------

oracle.install.db.OPER_GROUP=

#-------------------------------------------------------------------------------

# Specify the cluster node names selected during the installation.

# Example : oracle.install.db.CLUSTER_NODES=node1,node2

#-------------------------------------------------------------------------------

oracle.install.db.CLUSTER_NODES=

#------------------------------------------------------------------------------

# This variable is used to enable or disable RAC One Node install.

#

#   - true  : Value of RAC One Node service name is used.

#   - false : Value of RAC One Node service name is not used.

#

# If left blank, it will be assumed to be false.

#------------------------------------------------------------------------------

oracle.install.db.isRACOneInstall=false

#------------------------------------------------------------------------------

# Specify the name for RAC One Node Service.

#------------------------------------------------------------------------------

oracle.install.db.racOneServiceName=

#-------------------------------------------------------------------------------

# Specify the type of database to create.

# It can be one of the following:

#   - GENERAL_PURPOSE/TRANSACTION_PROCESSING

#   - DATA_WAREHOUSE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.type=GENERAL_PURPOSE

#-------------------------------------------------------------------------------

# Specify the Starter Database Global Database Name.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.globalDBName=

#-------------------------------------------------------------------------------

# Specify the Starter Database SID.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.SID=

#-------------------------------------------------------------------------------

# Specify the Starter Database character set.

#

#  One of the following

#  AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,

#  EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,

#  BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,

#  AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,

#  IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,

#  KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,

#  ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.characterSet=

#------------------------------------------------------------------------------

# This variable should be set to true if Automatic Memory Management

# in Database is desired.

# If Automatic Memory Management is not desired, and memory allocation

# is to be done manually, then set it to false.

#------------------------------------------------------------------------------

oracle.install.db.config.starterdb.memoryOption=false

#-------------------------------------------------------------------------------

# Specify the total memory allocation for the database. Value(in MB) should be

# at least 256 MB, and should not exceed the total physical memory available

# on the system.

# Example: oracle.install.db.config.starterdb.memoryLimit=512

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.memoryLimit=

#-------------------------------------------------------------------------------

# This variable controls whether to load Example Schemas onto

# the starter database or not.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.installExampleSchemas=false

#-------------------------------------------------------------------------------

# This variable includes enabling audit settings, configuring password profiles

# and revoking some grants to public. These settings are provided by default.

# These settings may also be disabled.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.enableSecuritySettings=true

###############################################################################

#                                                                             #

# Passwords can be supplied for the following four schemas in the               #

# starter database:                                                                 #

#   SYS                                                                       #

#   SYSTEM                                                                    #

#   SYSMAN (used by Enterprise Manager)                                       #

#   DBSNMP (used by Enterprise Manager)                                       #

#                                                                             #

# Same password can be used for all accounts (not recommended)                      #

# or different passwords for each account can be provided (recommended)       #

#                                                                             #

###############################################################################

#------------------------------------------------------------------------------

# This variable holds the password that is to be used for all schemas in the

# starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.ALL=

#-------------------------------------------------------------------------------

# Specify the SYS password for the starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.SYS=

#-------------------------------------------------------------------------------

# Specify the SYSTEM password for the starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.SYSTEM=

#-------------------------------------------------------------------------------

# Specify the SYSMAN password for the starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.SYSMAN=

#-------------------------------------------------------------------------------

# Specify the DBSNMP password for the starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.DBSNMP=

#-------------------------------------------------------------------------------

# Specify the management option to be selected for the starter database.

# It can be one of the following:

#   - GRID_CONTROL

#   - DB_CONTROL

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.control=DB_CONTROL

#-------------------------------------------------------------------------------

# Specify the Management Service to use if Grid Control is selected to manage

# the database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=

###############################################################################

#                                                                             #

# SPECIFY BACKUP AND RECOVERY OPTIONS                                               #

# ------------------------------------                                            #

# Out-of-box backup and recovery options for the database can be mentioned    #

# using the entries below.                                                             #

#                                                                             #

###############################################################################

#------------------------------------------------------------------------------

# This variable is to be set to false if automated backup is not required. Else

# this can be set to true.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.automatedBackup.enable=false

#------------------------------------------------------------------------------

# Regardless of the type of storage that is chosen for backup and recovery, if

# automated backups are enabled, a job will be scheduled to run daily to backup

# the database. This job will run as the operating system user that is

# specified in this variable.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.automatedBackup.osuid=

#-------------------------------------------------------------------------------

# Regardless of the type of storage that is chosen for backup and recovery, if

# automated backups are enabled, a job will be scheduled to run daily to backup

# the database. This job will run as the operating system user specified by the

# above entry. The following entry stores the password for the above operating

# system user.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.automatedBackup.ospwd=

#-------------------------------------------------------------------------------

# Specify the type of storage to use for the database.

# It can be one of the following:

#   - FILE_SYSTEM_STORAGE

#   - ASM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.storageType=

#-------------------------------------------------------------------------------

# Specify the database file location which is a directory for datafiles, control

# files, redo logs.

#

# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=

#-------------------------------------------------------------------------------

# Specify the backup and recovery location.

#

# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=

#-------------------------------------------------------------------------------

# Specify the existing ASM disk groups to be used for storage.

#

# Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.asm.diskGroup=

#-------------------------------------------------------------------------------

# Specify the password for ASMSNMP user of the ASM instance.

#

# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.asm.ASMSNMPPassword=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username.

#

#  Example   : [email protected]

#------------------------------------------------------------------------------

MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username password.

#

# Example    : MYORACLESUPPORT_PASSWORD=password

#------------------------------------------------------------------------------

MYORACLESUPPORT_PASSWORD=

#------------------------------------------------------------------------------

# Specify whether to enable the user to set the password for

# My Oracle Support credentials. The value can be either true or false.

# If left blank it will be assumed to be false.

#

# Example    : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true

#------------------------------------------------------------------------------

SECURITY_UPDATES_VIA_MYORACLESUPPORT=false

#------------------------------------------------------------------------------

# Specify whether user doesn‘t want to configure Security Updates.

# The value for this variable should be true if you don‘t want to configure

# Security Updates, false otherwise.

#

# The value can be either true or false. If left blank it will be assumed

# to be false.

#

# Example    : DECLINE_SECURITY_UPDATES=false

#------------------------------------------------------------------------------

DECLINE_SECURITY_UPDATES=true

#------------------------------------------------------------------------------

# Specify the Proxy server name. Length should be greater than zero.

#

# Example    : PROXY_HOST=proxy.domain.com

#------------------------------------------------------------------------------

PROXY_HOST=

#------------------------------------------------------------------------------

# Specify the proxy port number. Should be Numeric and at least 2 chars.

#

# Example    : PROXY_PORT=25

#------------------------------------------------------------------------------

PROXY_PORT=

#------------------------------------------------------------------------------

# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD

# blank if your proxy server requires no authentication.

#

# Example    : PROXY_USER=username

#------------------------------------------------------------------------------

PROXY_USER=

#------------------------------------------------------------------------------

# Specify the proxy password. Leave PROXY_USER and PROXY_PWD

# blank if your proxy server requires no authentication.

#

# Example    : PROXY_PWD=password

#------------------------------------------------------------------------------

PROXY_PWD=

#------------------------------------------------------------------------------

# Specify the proxy realm.

#

# Example    : PROXY_REALM=metalink

#------------------------------------------------------------------------------

PROXY_REALM=

#------------------------------------------------------------------------------

# Specify the Oracle Support Hub URL.

#

# Example    : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/

#------------------------------------------------------------------------------

COLLECTOR_SUPPORTHUB_URL=

#------------------------------------------------------------------------------

# Specify the auto-updates option. It can be one of the following:

#   - MYORACLESUPPORT_DOWNLOAD

#   - OFFLINE_UPDATES

#   - SKIP_UPDATES

#------------------------------------------------------------------------------

oracle.installer.autoupdates.option=SKIP_UPDATES

#------------------------------------------------------------------------------

# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where

# the updates are to be downloaded.

# In case OFFLINE_UPDATES option is chosen, specify the location where the updates

# are present.

#------------------------------------------------------------------------------

oracle.installer.autoupdates.downloadUpdatesLoc=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username which has the patches download privileges

# to be used for software updates.

#  Example   : [email protected]

#------------------------------------------------------------------------------

AUTOUPDATES_MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username password which has the patches download privileges

# to be used for software updates.

#

# Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password

#------------------------------------------------------------------------------

AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

[[email protected] database]$./runInstaller -silent -force –responseFile /home/oracle/etc/db_install.rsp

Starting Oracle Universal Installer...

Checking Temp space: must be greater than 120 MB.   Actual 2665 MB    Passed

Checking swap space: must be greater than 150 MB.   Actual 1945 MB    Passed

Preparing to launch Oracle Universal Installer from /tmp/OraInstall2014-04-24_05-00-15PM. Please wait ...[[email protected] database]$

最后

You can find the log of this install session at:

/oracle/oraInventory/logs/installActions2014-04-24_08-07-26PM.log

The installation of Oracle Database 11g was successful.

Please check ‘/oracle/oraInventory/logs/silentInstall2014-04-24_08-07-26PM.log‘ for more details.

As a root user, execute the following script(s):

1. /oracle/oraInventory/orainstRoot.sh

2. /oracle/product/11.2.0/db_1/root.sh

查看安装日志文件tail -100f /oracle/oraInventory/logs/installActions2014-04-24_08-07-26PM.log

运行脚本

[[email protected] ~]# /oracle/oraInventory/orainstRoot.sh

Changing permissions of /oracle/oraInventory.

Adding read,write permissions for group.

Removing read,write,execute permissions for world.

Changing groupname of /oracle/oraInventory to oinstall.

The execution of the script is complete.

[[email protected] ~]# /oracle/product/11.2.0/db_1/root.sh

Check /oracle/product/11.2.0/db_1/install/root_frank_2014-04-24_20-20-10.log for the output of root script

[[email protected] ~]# more /oracle/product/11.2.0/db_1/install/root_frank_2014-04-24_20-20-10.log

Performing root user operation for Oracle 11g

The following environment variables are set as:

ORACLE_OWNER= oracle

ORACLE_HOME=  /oracle/product/11.2.0/db_1

Copying dbhome to /usr/local/bin ...

Copying oraenv to /usr/local/bin ...

Copying coraenv to /usr/local/bin ...

Entries will be added to the /etc/oratab file as needed by

Database Configuration Assistant when a database is created

Finished running generic part of root script.

Now product-specific root actions will be performed.

Finished product-specific root actions.

Finished product-specific root actions.

完成安装！

时间： 2024-08-03 03:39:28

oracle11.2静默安装的相关文章

oracle-11.2.0.4静默安装----RedHat7.5

1.配置/etc/hosts文件和关闭seliux和firewall防火墙 编辑/etc/hosts文件 [[email protected] ~]# vim /etc/hosts [[email protected] ~]# cat /etc/hosts 192.168.10.50 henry 禁用selinux [[email protected] ~]# vim /etc/selinux/config [[email protected] ~]# cat /etc/selinux/conf

Oracle静默安装

测试CentOS 6.5_x64下静默安装Oracle 11g R2数据库 [一.下载地址] http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html Oracle 11g 联机文档: http://www.oracle.com/pls/db112/homepage [二.系统要求] 内存:1G(官方最低要求1G) 硬盘:40G(企业版安装所需4.29G和1.7G数据文件) 检查的命令 内

Oracle 11g 基于CentOS7静默安装教程(无图形界面，远程安装)

一.安装前环境准备 1.  VMware Workstation 10 搭建 CentOS 7 x64位虚拟机,CentOS7操作系统最小化安装,2G内存,20G磁盘空间,1核CPU,已配置好网络IP:192.168.1.30 2.  已下载Oracle 11gLinux安装文件:linux.x64_11gR2_database_1of2.zip和linux.x64_11gR2_database_2of2.zip 3.  通过XmanagerXftp上传到虚拟机/tmp目录中. 二.操作系统准备

Linux静默安装Oracle

打算在云服务器上装oracle服务,以前DBA美眉都是在图形化界面下安装,这次抓瞎了.赶紧上网查查,静默安装可以解决问题.于是乎赶紧开始部署,过程如下.安装环境:操作系统:CentOS 7内存:11G(11851M)硬盘:128Goracle版本 11g 1.准备oracle 安装包 linux.x64_11gR2_database_1of2.zip 和 linux.x64_11gR2_database_2of2.zip 2.检查本机依赖包,没找到的用 yum install ****** 命令

Oracle11gR2 for Linux6.4 静默安装

Oracle11gR2 for Linux6.4 静默安装 1.安装准备 ####################################### 主机:window7,64位 数据库版本:Oracle Database 11.2.0.1 ,将装在虚拟主机中 虚拟主机:RHEL6.4 Server,32位(镜像文件:rhel-server-6.4-i386-dvd.iso, vmware虚拟机,操作系统仅安装了基本服务,简体中文,2G内存,20磁盘空间). 所有操作无需使用图形界面. 静默

Oracle 11.2.0.4静默安装软件和创建数据库

在没有图形界面的情况时,安装Oracle数据库软件和创建数据库就只能使用命令行的方式进行. 本文假设安装的前提条件都已经配置好. 一.静默安装数据库软件 1.准备参数文件 这个参数文件是用于安装软件使用的,里边配置了需要安装的版本.语言.ORACLE_HOME等信息. 这个文件的模版在database/response目录下的db_install.rsp,文件中的各个参数作用参考http://docs.oracle.com/cd/E11882_01/em.112/e12255/oui3_resp

oracle 11G 静默安装

首先上传: 上传两个database软件包到/dir 目录下 Unzip p13390677_112040_Linux-x86-64_1of7.zip Unzip p13390677_112040_Linux-x86-64_2of7.zip 请记住这两个软件包一个一个解压. [[email protected] dir]#groupadd oinstall   创建安装组 [[email protected] dir]#useradd -g oinstall -d /home/oracle or

RedHat 6 静默安装Oracle 11gR2

之前看了网上很多篇Linux静默安装Oracle的文章,但安装测试时老觉得有问题,后来直接找来Oracle官方英文文档并仔细阅读研究rsp文件的内容说明,经过自己在虚拟机中的安装测试,使用RedHat 6.5(内核版本:2.6.32-431.el6.x86_64)上静默安装Oracle 11gR2(版本:11.2.0.3),整理出了本文,主要包括了环境要求与准备.静默安装Oracle软件与监听.静默安装Oracle数据库.安装完成后检查.设置Oracle开机自动启动等部分. 一. 环境要求与准备

Oracle 12cR1 RAC 在VMware Workstation上安装(下)—静默安装

Oracle 12cR1 RAC 在VMware Workstation上安装(下)-静默安装 1.1  静默安装 1.1.1  静默安装grid 安装之前使用脚本进行校验,确保所有的failed选项都可以忽略. ./runcluvfy.sh stage -pre crsinst -n raclhr-12cR1-N1,raclhr-12cR1-N2 -fixup -verbose 1.1.1.1  新建/etc/oraInst.loc文件 在2个节点上新建/etc/oraInst.loc,文件中