<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys s1
[s1]
Aug 25 2015 10:34:37-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 4, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s1]int
[s1]interface et
[s1]interface Eth-Trunk 1
[s1-Eth-Trunk1]mod
[s1-Eth-Trunk1]mode la
[s1-Eth-Trunk1]mode lacp-static
[s1-Eth-Trunk1]
Aug 25 2015 10:35:17-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 5, the chan
ge loop count is 0, and the maximum number of records is 4095.tr
[s1-Eth-Trunk1]trunkport
[s1-Eth-Trunk1]tr
[s1-Eth-Trunk1]trun
[s1-Eth-Trunk1]trunkport gi
[s1-Eth-Trunk1]trunkport GigabitEthernet 0/0/1
Info: This operation may take a few seconds. Please wait for a moment......done.
[s1-Eth-Trunk1]
Aug 25 2015 10:35:47-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 6, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s1-Eth-Trunk1]trunkport GigabitEthernet 0/0/2
Info: This operation may take a few seconds. Please wait for a moment...done.
[s1-Eth-Trunk1]q
[s1]
Aug 25 2015 10:35:57-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 7, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s1]dis
[s1]display et
[s1]display eth-trunk 1
Eth-Trunk1‘s state information is:
Local:
LAG ID: 1 WorkingMode: STATIC
Preempt Delay: Disabled Hash arithmetic: According to SIP-XOR-DIP
System Priority: 32768 System ID: 4c1f-cc9c-08f2
Least Active-linknumber: 1 Max Active-linknumber: 8
Operate status: down Number Of Up Port In Trunk: 0
--------------------------------------------------------------------------------
ActorPortName Status PortType PortPri PortNo PortKey PortState Weight
GigabitEthernet0/0/1 Unselect 1000TG 32768 2 401 10100010 1
GigabitEthernet0/0/2 Unselect 1000TG 32768 3 401 10100010 1
Partner:
--------------------------------------------------------------------------------
ActorPortName SysPri SystemID PortPri PortNo PortKey PortState
GigabitEthernet0/0/1 0 0000-0000-0000 0 0 0 10100011
GigabitEthernet0/0/2 0 0000-0000-0000 0 0 0 10100011
[s1]
Aug 25 2015 10:37:03-08:00 s1 %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk1 has
turned into UP state.
<s1>int
<s1>sys
Enter system view, return user view with Ctrl+Z.
[s1]int
[s1]interface et
[s1]interface Eth-Trunk 1
[s1-Eth-Trunk1]po
[s1-Eth-Trunk1]port lin
[s1-Eth-Trunk1]port link-type tr
[s1-Eth-Trunk1]port link-type trunk
[s1-Eth-Trunk1]po
[s1-Eth-Trunk1]port tr
[s1-Eth-Trunk1]port trunk all
[s1-Eth-Trunk1]port trunk allow-pass
Aug 25 2015 10:58:58-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 8, the chan
ge loop count is 0, and the maximum number of records is 4095.vlan all
[s1-Eth-Trunk1]port trunk allow-pass vlan all
[s1-Eth-Trunk1]
Aug 25 2015 10:59:08-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 9, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s1-Eth-Trunk1]q
[s1]int
[s1]interface gi
[s1]interface GigabitEthernet 0/0/3
[s1-GigabitEthernet0/0/3]po
[s1-GigabitEthernet0/0/3]port lin
[s1-GigabitEthernet0/0/3]port link-t
[s1-GigabitEthernet0/0/3]port link-type acc
[s1-GigabitEthernet0/0/3]port link-type access
[s1-GigabitEthernet0/0/3]
Aug 25 2015 11:01:18-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 10, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-GigabitEthernet0/0/3]q
[s1]int
[s1]interface gi
[s1]interface e
[s1]interface Et
[s1]int
[s1]interface gi
[s1]interface GigabitEthernet 0/0/24
[s1-GigabitEthernet0/0/24]po
[s1-GigabitEthernet0/0/24]port lin
[s1-GigabitEthernet0/0/24]port link-t
[s1-GigabitEthernet0/0/24]port link-type acc
[s1-GigabitEthernet0/0/24]port link-type access
[s1-GigabitEthernet0/0/24]q
[s1]v
Aug 25 2015 11:03:28-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 11, the cha
nge loop count is 0, and the maximum number of records is 4095.
^
Error:Ambiguous command found at ‘^‘ position.
[s1]vlan 3
[s1-vlan3]
Aug 25 2015 11:04:18-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 12, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-vlan3]po
[s1-vlan3]port gi
[s1-vlan3]port GigabitEthernet 0/0/3
[s1-vlan3]
Aug 25 2015 11:04:38-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 13, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-vlan3]vlan 4
[s1-vlan4]po
[s1-vlan4]port
Aug 25 2015 11:04:58-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 14, the cha
nge loop count is 0, and the maximum number of records is 4095. g
[s1-vlan4]port GigabitEthernet 0/0/24
[s1-vlan4]
Aug 25 2015 11:05:08-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 15, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-vlan4]dis
[s1-vlan4]q
[s1]dis
[s1]display vlan
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
1 common UT:GE0/0/4(D) GE0/0/5(D) GE0/0/6(D) GE0/0/7(D)
GE0/0/8(D) GE0/0/9(D) GE0/0/10(D) GE0/0/11(D)
GE0/0/12(D) GE0/0/13(D) GE0/0/14(D) GE0/0/15(D)
GE0/0/16(D) GE0/0/17(D) GE0/0/18(D) GE0/0/19(D)
GE0/0/20(D) GE0/0/21(D) GE0/0/22(D) GE0/0/23(D)
Eth-Trunk1(U)
3 common UT:GE0/0/3(U)
TG:Eth-Trunk1(U)
4 common UT:GE0/0/24(U)
TG:Eth-Trunk1(U)
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
1 enable default enable disable VLAN 0001
3 enable default enable disable VLAN 0003
4 enable default enable disable VLAN 0004
[s1]
<s1>
<s1>
<s1>sys
Enter system view, return user view with Ctrl+Z.
[s1]dis
[s1]display vlan
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
1 common UT:GE0/0/4(D) GE0/0/5(D) GE0/0/6(D) GE0/0/7(D)
GE0/0/8(D) GE0/0/9(D) GE0/0/10(D) GE0/0/11(D)
GE0/0/12(D) GE0/0/13(D) GE0/0/14(D) GE0/0/15(D)
GE0/0/16(D) GE0/0/17(D) GE0/0/18(D) GE0/0/19(D)
GE0/0/20(D) GE0/0/21(D) GE0/0/22(D) GE0/0/23(D)
Eth-Trunk1(U)
3 common UT:GE0/0/3(U)
TG:Eth-Trunk1(U)
4 common UT:GE0/0/24(U)
TG:Eth-Trunk1(U)
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
1 enable default enable disable VLAN 0001
3 enable default enable disable VLAN 0003
4 enable default enable disable VLAN 0004
[s1]
User interface con0 is available
Please Press ENTER.
<s1>sys
Enter system view, return user view with Ctrl+Z.
[s1]dis
[s1]display vlan
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
1 common UT:GE0/0/4(D) GE0/0/5(D) GE0/0/6(D) GE0/0/7(D)
GE0/0/8(D) GE0/0/9(D) GE0/0/10(D) GE0/0/11(D)
GE0/0/12(D) GE0/0/13(D) GE0/0/14(D) GE0/0/15(D)
GE0/0/16(D) GE0/0/17(D) GE0/0/18(D) GE0/0/19(D)
GE0/0/20(D) GE0/0/21(D) GE0/0/22(D) GE0/0/23(D)
Eth-Trunk1(U)
3 common UT:GE0/0/3(U)
TG:Eth-Trunk1(U)
4 common UT:GE0/0/24(U)
TG:Eth-Trunk1(U)
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
1 enable default enable disable VLAN 0001
3 enable default enable disable VLAN 0003
4 enable default enable disable VLAN 0004
[s1]vlan 2
[s1-vlan2]
Aug 25 2015 13:49:24-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 16, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-vlan2]q
[s1]dis
[s1]display vlan
The total number of vlans is : 4
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
1 common UT:GE0/0/4(D) GE0/0/5(D) GE0/0/6(D) GE0/0/7(D)
GE0/0/8(D) GE0/0/9(D) GE0/0/10(D) GE0/0/11(D)
GE0/0/12(D) GE0/0/13(D) GE0/0/14(D) GE0/0/15(D)
GE0/0/16(D) GE0/0/17(D) GE0/0/18(D) GE0/0/19(D)
GE0/0/20(D) GE0/0/21(D) GE0/0/22(D) GE0/0/23(D)
Eth-Trunk1(U)
2 common TG:Eth-Trunk1(U)
3 common UT:GE0/0/3(U)
TG:Eth-Trunk1(U)
4 common UT:GE0/0/24(U)
TG:Eth-Trunk1(U)
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
1 enable default enable disable VLAN 0001
2 enable default enable disable VLAN 0002
3 enable default enable disable VLAN 0003
4 enable default enable disable VLAN 0004
[s1]
以上配置s2和s1配置一样
<s1>sys
Enter system view, return user view with Ctrl+Z.
[s1]int
[s1]interface gi
[s1]interface GigabitEthernet 0/0/24
[s1-GigabitEthernet0/0/24]un
[s1-GigabitEthernet0/0/24]undo po
[s1-GigabitEthernet0/0/24]undo port de
[s1-GigabitEthernet0/0/24]undo port default vlan
[s1-GigabitEthernet0/0/24]po
[s1-GigabitEthernet0/0/24]port lin
[s1-GigabitEthernet0/0/24]port link-t
[s1-GigabitEthernet0/0/24]port link-type hy
[s1-GigabitEthernet0/0/24]port link-type hybrid
Aug 25 2015 14:08:47-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 17, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-GigabitEthernet0/0/24]po
[s1-GigabitEthernet0/0/24]port hy
[s1-GigabitEthernet0/0/24]port hybrid un
[s1-GigabitEthernet0/0/24]port hybrid untagged v
Aug 25 2015 14:08:57-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 18, the cha
nge loop count is 0, and the maximum number of records is 4095.lan 2 4
[s1-GigabitEthernet0/0/24]port hybrid untagged vlan 2 4
[s1-GigabitEthernet0/0/24]
Aug 25 2015 14:09:07-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 19, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-GigabitEthernet0/0/24]port hybrid pv
^
Error:Incomplete command found at ‘^‘ position.
[s1-GigabitEthernet0/0/24]port hybrid pv
[s1-GigabitEthernet0/0/24]port hybrid pvid vlan 4
[s1-GigabitEthernet0/0/24]q
[s1]
Aug 25 2015 14:09:27-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 20, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1]
<s2>sys
Enter system view, return user view with Ctrl+Z.
[s2]int
[s2]interface gi
[s2]interface GigabitEthernet 0/0/24
[s2-GigabitEthernet0/0/24]un
[s2-GigabitEthernet0/0/24]undo po
[s2-GigabitEthernet0/0/24]undo port de
[s2-GigabitEthernet0/0/24]undo port default vlan
[s2-GigabitEthernet0/0/24]po
[s2-GigabitEthernet0/0/24]port
Aug 25 2015 14:10:09-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 17, the cha
nge loop count is 0, and the maximum number of records is 4095.
^
Error:Incomplete command found at ‘^‘ position.
[s2-GigabitEthernet0/0/24]po
[s2-GigabitEthernet0/0/24]port lin
[s2-GigabitEthernet0/0/24]port link-t
[s2-GigabitEthernet0/0/24]port link-type hy
[s2-GigabitEthernet0/0/24]port link-type hybrid
[s2-GigabitEthernet0/0/24]po
[s2-GigabitEthernet0/0/24]port hy
[s2-GigabitEthernet0/0/24]port hybrid un
[s2-GigabitEthernet0/0/24]port hybrid untagged vlan
Aug 25 2015 14:10:29-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 18, the cha
nge loop count is 0, and the maximum number of records is 4095.2 4
[s2-GigabitEthernet0/0/24]port hybrid untagged vlan 2 4
[s2-GigabitEthernet0/0/24]
Aug 25 2015 14:10:39-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 19, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2-GigabitEthernet0/0/24]po
[s2-GigabitEthernet0/0/24]port hy
[s2-GigabitEthernet0/0/24]port hybrid p
[s2-GigabitEthernet0/0/24]port hybrid pvid vlan 4
[s2-GigabitEthernet0/0/24]q
[s2]
Aug 25 2015 14:10:59-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 20, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2]int
[s2]interface gi
[s2]interface GigabitEthernet 0/0/3
[s2-GigabitEthernet0/0/3]un
[s2-GigabitEthernet0/0/3]undo port de
[s2-GigabitEthernet0/0/3]undo port default vlan
[s2-GigabitEthernet0/0/3]po
[s2-GigabitEthernet0/0/3]port lin
[s2-GigabitEthernet0/0/3]port link-t
[s2-GigabitEthernet0/0/3]port link-type
Aug 25 2015 14:11:29-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 21, the cha
nge loop count is 0, and the maximum number of records is 4095.hy
[s2-GigabitEthernet0/0/3]port link-type hybrid
[s2-GigabitEthernet0/0/3]po
[s2-GigabitEthernet0/0/3]port hy
Aug 25 2015 14:11:39-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 22, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2-GigabitEthernet0/0/3]port hybrid un
[s2-GigabitEthernet0/0/3]port hybrid untagged vlan 2 4
[s2-GigabitEthernet0/0/3]po
[s2-GigabitEthernet0/0/3]port
Aug 25 2015 14:11:49-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 23, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2-GigabitEthernet0/0/3]po
[s2-GigabitEthernet0/0/3]port hy
[s2-GigabitEthernet0/0/3]port hybrid p
[s2-GigabitEthernet0/0/3]port hybrid pvid vlan 2
[s2-GigabitEthernet0/0/3]
Aug 25 2015 14:12:09-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 24, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2-GigabitEthernet0/0/3]q
[s2]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys s3
[s3]ip add
[s3]ip addr
[s3]ip a
Aug 25 2015 13:54:20-08:00 s3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 4, the chan
ge loop count is 0, and the maximum number of records is 4
[s3]int
[s3]interface vlan
[s3]interface Vlanif 1
[s3-Vlanif1]ip
[s3-Vlanif1]ipv6add
[s3-Vlanif1]ip add
[s3-Vlanif1]ip address 10.0.4.2 24
[s3-Vlanif1]
Aug 25 2015 13:54:48-08:00 s3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP o
n the interface Vlanif1 has entered the UP state.
Aug 25 2015 13:54:50-08:00 s3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 5, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s3-Vlanif1]q
[s3]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys s4
[s4]
Aug 25 2015 13:58:16-08:00 s4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 4, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s4]int
[s4]interface vlan
[s4]interface Vlanif 1
[s4-Vlanif1]ip add
[s4-Vlanif1]ip address 10.0.4.4 24
[s4-Vlanif1]
Aug 25 2015 13:58:38-08:00 s4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP o
n the interface Vlanif1 has entered the UP state.q
[s4]
Aug 25 2015 13:58:46-08:00 s4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 5, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s4]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r1
[r1]int
[r1]interface gi
[r1]interface GigabitEthernet 0/0/0
[r1-GigabitEthernet0/0/0]ip add
[r1-GigabitEthernet0/0/0]ip address 10.0.4.1 24
[r1-GigabitEthernet0/0/0]
Aug 25 2015 10:34:12-05:13 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP o
n the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]q
[r1]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r3
[r3]int
[r3]interface gi
[r3]interface GigabitEthernet 0/0/0
[r3-GigabitEthernet0/0/0]ip add
[r3-GigabitEthernet0/0/0]ip address 10.0.4.3 24
[r3-GigabitEthernet0/0/0]q
[r3]
Aug 25 2015 10:38:52-05:13 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP o
n the interface GigabitEthernet0/0/0 has entered the UP state.
[r3]
配置文件：
[r1]display current-configuration
[V200R003C00]
#
sysname r1
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone Indian Standard Time minus 05:13:20
clock daylight-saving-time Day Light Saving Time repeating 12:32 9-1 12:32 11-23
00:00 2005 2005
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 10.0.4.1 255.255.255.0
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
[r3]display current-configuration
[V200R003C00]
#
sysname r3
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone Indian Standard Time minus 05:13:20
clock daylight-saving-time Day Light Saving Time repeating 12:32 9-1 12:32 11-23
00:00 2005 2005
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 10.0.4.3 255.255.255.0
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
[r3]display current-configuration
[V200R003C00]
#
sysname r3
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone Indian Standard Time minus 05:13:20
clock daylight-saving-time Day Light Saving Time repeating 12:32 9-1 12:32 11-23
00:00 2005 2005
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 10.0.4.3 255.255.255.0
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
[s1]display current-configuration
#
sysname s1
#
vlan batch 2 to 4
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password simple admin
local-user admin service-type http
#
interface Vlanif1
#
interface MEth0/0/1
#
interface Eth-Trunk1
port link-type trunk
port trunk allow-pass vlan 2 to 4094
mode lacp-static
#
interface GigabitEthernet0/0/1
eth-trunk 1
#
interface GigabitEthernet0/0/2
eth-trunk 1
#
interface GigabitEthernet0/0/3
port link-type access
port default vlan 3
#
interface GigabitEthernet0/0/4
#
interface GigabitEthernet0/0/5
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
port hybrid pvid vlan 4
port hybrid untagged vlan 2 4
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
#
return
[s2]display current-configuration
#
sysname s2
#
vlan batch 2 to 4
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password simple admin
local-user admin service-type http
#
interface Vlanif1
#
interface MEth0/0/1
#
interface Eth-Trunk1
port link-type trunk
port trunk allow-pass vlan 2 to 4094
mode lacp-static
#
interface GigabitEthernet0/0/1
eth-trunk 1
#
interface GigabitEthernet0/0/2
eth-trunk 1
#
interface GigabitEthernet0/0/3
port hybrid pvid vlan 2
port hybrid untagged vlan 2 4
#
interface GigabitEthernet0/0/4
#
interface GigabitEthernet0/0/5
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
port hybrid pvid vlan 4
port hybrid untagged vlan 2 4
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
#
return
[s3]display current-configuration
#
sysname s3
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password simple admin
local-user admin service-type http
#
interface Vlanif1
ip address 10.0.4.2 255.255.255.0
#
interface MEth0/0/1
#
interface Ethernet0/0/1
#
interface Ethernet0/0/2
#
interface Ethernet0/0/3
#
interface Ethernet0/0/4
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface Ethernet0/0/9
#
interface Ethernet0/0/10
#
interface Ethernet0/0/11
#
interface Ethernet0/0/12
#
interface Ethernet0/0/13
#
interface Ethernet0/0/14
#
interface Ethernet0/0/15
#
interface Ethernet0/0/16
#
interface Ethernet0/0/17
#
interface Ethernet0/0/18
#
interface Ethernet0/0/19
#
interface Ethernet0/0/20
#
interface Ethernet0/0/21
#
interface Ethernet0/0/22
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
#
return
[s4]display current-configuration
#
sysname s4
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password simple admin
local-user admin service-type http
#
interface Vlanif1
ip address 10.0.4.4 255.255.255.0
#
interface MEth0/0/1
#
interface Ethernet0/0/1
#
interface Ethernet0/0/2
#
interface Ethernet0/0/3
#
interface Ethernet0/0/4
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface Ethernet0/0/9
#
interface Ethernet0/0/10
#
interface Ethernet0/0/11
#
interface Ethernet0/0/12
#
interface Ethernet0/0/13
#
interface Ethernet0/0/14
#
interface Ethernet0/0/15
#
interface Ethernet0/0/16
#
interface Ethernet0/0/17
#
interface Ethernet0/0/18
#
interface Ethernet0/0/19
#
interface Ethernet0/0/20
#
interface Ethernet0/0/21
#
interface Ethernet0/0/22
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
#
return
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys s1
[s1]
Aug 25 2015 10:34:37-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 4, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s1]int
[s1]interface et
[s1]interface Eth-Trunk 1
[s1-Eth-Trunk1]mod
[s1-Eth-Trunk1]mode la
[s1-Eth-Trunk1]mode lacp-static
[s1-Eth-Trunk1]
Aug 25 2015 10:35:17-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 5, the chan
ge loop count is 0, and the maximum number of records is 4095.tr
[s1-Eth-Trunk1]trunkport
[s1-Eth-Trunk1]tr
[s1-Eth-Trunk1]trun
[s1-Eth-Trunk1]trunkport gi
[s1-Eth-Trunk1]trunkport GigabitEthernet 0/0/1
Info: This operation may take a few seconds. Please wait for a moment......done.
[s1-Eth-Trunk1]
Aug 25 2015 10:35:47-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 6, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s1-Eth-Trunk1]trunkport GigabitEthernet 0/0/2
Info: This operation may take a few seconds. Please wait for a moment...done.
[s1-Eth-Trunk1]q
[s1]
Aug 25 2015 10:35:57-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 7, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s1]dis
[s1]display et
[s1]display eth-trunk 1
Eth-Trunk1‘s state information is:
Local:
LAG ID: 1 WorkingMode: STATIC
Preempt Delay: Disabled Hash arithmetic: According to SIP-XOR-DIP
System Priority: 32768 System ID: 4c1f-cc9c-08f2
Least Active-linknumber: 1 Max Active-linknumber: 8
Operate status: down Number Of Up Port In Trunk: 0
--------------------------------------------------------------------------------
ActorPortName Status PortType PortPri PortNo PortKey PortState Weight
GigabitEthernet0/0/1 Unselect 1000TG 32768 2 401 10100010 1
GigabitEthernet0/0/2 Unselect 1000TG 32768 3 401 10100010 1
Partner:
--------------------------------------------------------------------------------
ActorPortName SysPri SystemID PortPri PortNo PortKey PortState
GigabitEthernet0/0/1 0 0000-0000-0000 0 0 0 10100011
GigabitEthernet0/0/2 0 0000-0000-0000 0 0 0 10100011
[s1]
Aug 25 2015 10:37:03-08:00 s1 %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk1 has
turned into UP state.
<s1>int
<s1>sys
Enter system view, return user view with Ctrl+Z.
[s1]int
[s1]interface et
[s1]interface Eth-Trunk 1
[s1-Eth-Trunk1]po
[s1-Eth-Trunk1]port lin
[s1-Eth-Trunk1]port link-type tr
[s1-Eth-Trunk1]port link-type trunk
[s1-Eth-Trunk1]po
[s1-Eth-Trunk1]port tr
[s1-Eth-Trunk1]port trunk all
[s1-Eth-Trunk1]port trunk allow-pass
Aug 25 2015 10:58:58-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 8, the chan
ge loop count is 0, and the maximum number of records is 4095.vlan all
[s1-Eth-Trunk1]port trunk allow-pass vlan all
[s1-Eth-Trunk1]
Aug 25 2015 10:59:08-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 9, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s1-Eth-Trunk1]q
[s1]int
[s1]interface gi
[s1]interface GigabitEthernet 0/0/3
[s1-GigabitEthernet0/0/3]po
[s1-GigabitEthernet0/0/3]port lin
[s1-GigabitEthernet0/0/3]port link-t
[s1-GigabitEthernet0/0/3]port link-type acc
[s1-GigabitEthernet0/0/3]port link-type access
[s1-GigabitEthernet0/0/3]
Aug 25 2015 11:01:18-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 10, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-GigabitEthernet0/0/3]q
[s1]int
[s1]interface gi
[s1]interface e
[s1]interface Et
[s1]int
[s1]interface gi
[s1]interface GigabitEthernet 0/0/24
[s1-GigabitEthernet0/0/24]po
[s1-GigabitEthernet0/0/24]port lin
[s1-GigabitEthernet0/0/24]port link-t
[s1-GigabitEthernet0/0/24]port link-type acc
[s1-GigabitEthernet0/0/24]port link-type access
[s1-GigabitEthernet0/0/24]q
[s1]v
Aug 25 2015 11:03:28-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 11, the cha
nge loop count is 0, and the maximum number of records is 4095.
^
Error:Ambiguous command found at ‘^‘ position.
[s1]vlan 3
[s1-vlan3]
Aug 25 2015 11:04:18-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 12, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-vlan3]po
[s1-vlan3]port gi
[s1-vlan3]port GigabitEthernet 0/0/3
[s1-vlan3]
Aug 25 2015 11:04:38-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 13, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-vlan3]vlan 4
[s1-vlan4]po
[s1-vlan4]port
Aug 25 2015 11:04:58-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 14, the cha
nge loop count is 0, and the maximum number of records is 4095. g
[s1-vlan4]port GigabitEthernet 0/0/24
[s1-vlan4]
Aug 25 2015 11:05:08-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 15, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-vlan4]dis
[s1-vlan4]q
[s1]dis
[s1]display vlan
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
1 common UT:GE0/0/4(D) GE0/0/5(D) GE0/0/6(D) GE0/0/7(D)
GE0/0/8(D) GE0/0/9(D) GE0/0/10(D) GE0/0/11(D)
GE0/0/12(D) GE0/0/13(D) GE0/0/14(D) GE0/0/15(D)
GE0/0/16(D) GE0/0/17(D) GE0/0/18(D) GE0/0/19(D)
GE0/0/20(D) GE0/0/21(D) GE0/0/22(D) GE0/0/23(D)
Eth-Trunk1(U)
3 common UT:GE0/0/3(U)
TG:Eth-Trunk1(U)
4 common UT:GE0/0/24(U)
TG:Eth-Trunk1(U)
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
1 enable default enable disable VLAN 0001
3 enable default enable disable VLAN 0003
4 enable default enable disable VLAN 0004
[s1]
<s1>
<s1>
<s1>sys
Enter system view, return user view with Ctrl+Z.
[s1]dis
[s1]display vlan
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
1 common UT:GE0/0/4(D) GE0/0/5(D) GE0/0/6(D) GE0/0/7(D)
GE0/0/8(D) GE0/0/9(D) GE0/0/10(D) GE0/0/11(D)
GE0/0/12(D) GE0/0/13(D) GE0/0/14(D) GE0/0/15(D)
GE0/0/16(D) GE0/0/17(D) GE0/0/18(D) GE0/0/19(D)
GE0/0/20(D) GE0/0/21(D) GE0/0/22(D) GE0/0/23(D)
Eth-Trunk1(U)
3 common UT:GE0/0/3(U)
TG:Eth-Trunk1(U)
4 common UT:GE0/0/24(U)
TG:Eth-Trunk1(U)
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
1 enable default enable disable VLAN 0001
3 enable default enable disable VLAN 0003
4 enable default enable disable VLAN 0004
[s1]
User interface con0 is available
Please Press ENTER.
<s1>sys
Enter system view, return user view with Ctrl+Z.
[s1]dis
[s1]display vlan
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
1 common UT:GE0/0/4(D) GE0/0/5(D) GE0/0/6(D) GE0/0/7(D)
GE0/0/8(D) GE0/0/9(D) GE0/0/10(D) GE0/0/11(D)
GE0/0/12(D) GE0/0/13(D) GE0/0/14(D) GE0/0/15(D)
GE0/0/16(D) GE0/0/17(D) GE0/0/18(D) GE0/0/19(D)
GE0/0/20(D) GE0/0/21(D) GE0/0/22(D) GE0/0/23(D)
Eth-Trunk1(U)
3 common UT:GE0/0/3(U)
TG:Eth-Trunk1(U)
4 common UT:GE0/0/24(U)
TG:Eth-Trunk1(U)
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
1 enable default enable disable VLAN 0001
3 enable default enable disable VLAN 0003
4 enable default enable disable VLAN 0004
[s1]vlan 2
[s1-vlan2]
Aug 25 2015 13:49:24-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 16, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-vlan2]q
[s1]dis
[s1]display vlan
The total number of vlans is : 4
--------------------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
1 common UT:GE0/0/4(D) GE0/0/5(D) GE0/0/6(D) GE0/0/7(D)
GE0/0/8(D) GE0/0/9(D) GE0/0/10(D) GE0/0/11(D)
GE0/0/12(D) GE0/0/13(D) GE0/0/14(D) GE0/0/15(D)
GE0/0/16(D) GE0/0/17(D) GE0/0/18(D) GE0/0/19(D)
GE0/0/20(D) GE0/0/21(D) GE0/0/22(D) GE0/0/23(D)
Eth-Trunk1(U)
2 common TG:Eth-Trunk1(U)
3 common UT:GE0/0/3(U)
TG:Eth-Trunk1(U)
4 common UT:GE0/0/24(U)
TG:Eth-Trunk1(U)
VID Status Property MAC-LRN Statistics Description
--------------------------------------------------------------------------------
1 enable default enable disable VLAN 0001
2 enable default enable disable VLAN 0002
3 enable default enable disable VLAN 0003
4 enable default enable disable VLAN 0004
[s1]
以上配置s2和s1配置一样
<s1>sys
Enter system view, return user view with Ctrl+Z.
[s1]int
[s1]interface gi
[s1]interface GigabitEthernet 0/0/24
[s1-GigabitEthernet0/0/24]un
[s1-GigabitEthernet0/0/24]undo po
[s1-GigabitEthernet0/0/24]undo port de
[s1-GigabitEthernet0/0/24]undo port default vlan
[s1-GigabitEthernet0/0/24]po
[s1-GigabitEthernet0/0/24]port lin
[s1-GigabitEthernet0/0/24]port link-t
[s1-GigabitEthernet0/0/24]port link-type hy
[s1-GigabitEthernet0/0/24]port link-type hybrid
Aug 25 2015 14:08:47-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 17, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-GigabitEthernet0/0/24]po
[s1-GigabitEthernet0/0/24]port hy
[s1-GigabitEthernet0/0/24]port hybrid un
[s1-GigabitEthernet0/0/24]port hybrid untagged v
Aug 25 2015 14:08:57-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 18, the cha
nge loop count is 0, and the maximum number of records is 4095.lan 2 4
[s1-GigabitEthernet0/0/24]port hybrid untagged vlan 2 4
[s1-GigabitEthernet0/0/24]
Aug 25 2015 14:09:07-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 19, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1-GigabitEthernet0/0/24]port hybrid pv
^
Error:Incomplete command found at ‘^‘ position.
[s1-GigabitEthernet0/0/24]port hybrid pv
[s1-GigabitEthernet0/0/24]port hybrid pvid vlan 4
[s1-GigabitEthernet0/0/24]q
[s1]
Aug 25 2015 14:09:27-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 20, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s1]
<s2>sys
Enter system view, return user view with Ctrl+Z.
[s2]int
[s2]interface gi
[s2]interface GigabitEthernet 0/0/24
[s2-GigabitEthernet0/0/24]un
[s2-GigabitEthernet0/0/24]undo po
[s2-GigabitEthernet0/0/24]undo port de
[s2-GigabitEthernet0/0/24]undo port default vlan
[s2-GigabitEthernet0/0/24]po
[s2-GigabitEthernet0/0/24]port
Aug 25 2015 14:10:09-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 17, the cha
nge loop count is 0, and the maximum number of records is 4095.
^
Error:Incomplete command found at ‘^‘ position.
[s2-GigabitEthernet0/0/24]po
[s2-GigabitEthernet0/0/24]port lin
[s2-GigabitEthernet0/0/24]port link-t
[s2-GigabitEthernet0/0/24]port link-type hy
[s2-GigabitEthernet0/0/24]port link-type hybrid
[s2-GigabitEthernet0/0/24]po
[s2-GigabitEthernet0/0/24]port hy
[s2-GigabitEthernet0/0/24]port hybrid un
[s2-GigabitEthernet0/0/24]port hybrid untagged vlan
Aug 25 2015 14:10:29-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 18, the cha
nge loop count is 0, and the maximum number of records is 4095.2 4
[s2-GigabitEthernet0/0/24]port hybrid untagged vlan 2 4
[s2-GigabitEthernet0/0/24]
Aug 25 2015 14:10:39-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 19, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2-GigabitEthernet0/0/24]po
[s2-GigabitEthernet0/0/24]port hy
[s2-GigabitEthernet0/0/24]port hybrid p
[s2-GigabitEthernet0/0/24]port hybrid pvid vlan 4
[s2-GigabitEthernet0/0/24]q
[s2]
Aug 25 2015 14:10:59-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 20, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2]int
[s2]interface gi
[s2]interface GigabitEthernet 0/0/3
[s2-GigabitEthernet0/0/3]un
[s2-GigabitEthernet0/0/3]undo port de
[s2-GigabitEthernet0/0/3]undo port default vlan
[s2-GigabitEthernet0/0/3]po
[s2-GigabitEthernet0/0/3]port lin
[s2-GigabitEthernet0/0/3]port link-t
[s2-GigabitEthernet0/0/3]port link-type
Aug 25 2015 14:11:29-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 21, the cha
nge loop count is 0, and the maximum number of records is 4095.hy
[s2-GigabitEthernet0/0/3]port link-type hybrid
[s2-GigabitEthernet0/0/3]po
[s2-GigabitEthernet0/0/3]port hy
Aug 25 2015 14:11:39-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 22, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2-GigabitEthernet0/0/3]port hybrid un
[s2-GigabitEthernet0/0/3]port hybrid untagged vlan 2 4
[s2-GigabitEthernet0/0/3]po
[s2-GigabitEthernet0/0/3]port
Aug 25 2015 14:11:49-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 23, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2-GigabitEthernet0/0/3]po
[s2-GigabitEthernet0/0/3]port hy
[s2-GigabitEthernet0/0/3]port hybrid p
[s2-GigabitEthernet0/0/3]port hybrid pvid vlan 2
[s2-GigabitEthernet0/0/3]
Aug 25 2015 14:12:09-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 24, the cha
nge loop count is 0, and the maximum number of records is 4095.
[s2-GigabitEthernet0/0/3]q
[s2]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys s3
[s3]ip add
[s3]ip addr
[s3]ip a
Aug 25 2015 13:54:20-08:00 s3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 4, the chan
ge loop count is 0, and the maximum number of records is 4
[s3]int
[s3]interface vlan
[s3]interface Vlanif 1
[s3-Vlanif1]ip
[s3-Vlanif1]ipv6add
[s3-Vlanif1]ip add
[s3-Vlanif1]ip address 10.0.4.2 24
[s3-Vlanif1]
Aug 25 2015 13:54:48-08:00 s3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP o
n the interface Vlanif1 has entered the UP state.
Aug 25 2015 13:54:50-08:00 s3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 5, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s3-Vlanif1]q
[s3]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys s4
[s4]
Aug 25 2015 13:58:16-08:00 s4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 4, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s4]int
[s4]interface vlan
[s4]interface Vlanif 1
[s4-Vlanif1]ip add
[s4-Vlanif1]ip address 10.0.4.4 24
[s4-Vlanif1]
Aug 25 2015 13:58:38-08:00 s4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP o
n the interface Vlanif1 has entered the UP state.q
[s4]
Aug 25 2015 13:58:46-08:00 s4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.1
91.3.1 configurations have been changed. The current change number is 5, the chan
ge loop count is 0, and the maximum number of records is 4095.
[s4]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r1
[r1]int
[r1]interface gi
[r1]interface GigabitEthernet 0/0/0
[r1-GigabitEthernet0/0/0]ip add
[r1-GigabitEthernet0/0/0]ip address 10.0.4.1 24
[r1-GigabitEthernet0/0/0]
Aug 25 2015 10:34:12-05:13 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP o
n the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]q
[r1]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r3
[r3]int
[r3]interface gi
[r3]interface GigabitEthernet 0/0/0
[r3-GigabitEthernet0/0/0]ip add
[r3-GigabitEthernet0/0/0]ip address 10.0.4.3 24
[r3-GigabitEthernet0/0/0]q
[r3]
Aug 25 2015 10:38:52-05:13 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP o
n the interface GigabitEthernet0/0/0 has entered the UP state.
[r3]
配置文件：
[r1]display current-configuration
[V200R003C00]
#
sysname r1
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone Indian Standard Time minus 05:13:20
clock daylight-saving-time Day Light Saving Time repeating 12:32 9-1 12:32 11-23
00:00 2005 2005
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 10.0.4.1 255.255.255.0
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
[r3]display current-configuration
[V200R003C00]
#
sysname r3
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone Indian Standard Time minus 05:13:20
clock daylight-saving-time Day Light Saving Time repeating 12:32 9-1 12:32 11-23
00:00 2005 2005
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 10.0.4.3 255.255.255.0
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
[r3]display current-configuration
[V200R003C00]
#
sysname r3
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone Indian Standard Time minus 05:13:20
clock daylight-saving-time Day Light Saving Time repeating 12:32 9-1 12:32 11-23
00:00 2005 2005
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 10.0.4.3 255.255.255.0
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
user-interface vty 16 20
#
wlan ac
#
return
[s1]display current-configuration
#
sysname s1
#
vlan batch 2 to 4
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password simple admin
local-user admin service-type http
#
interface Vlanif1
#
interface MEth0/0/1
#
interface Eth-Trunk1
port link-type trunk
port trunk allow-pass vlan 2 to 4094
mode lacp-static
#
interface GigabitEthernet0/0/1
eth-trunk 1
#
interface GigabitEthernet0/0/2
eth-trunk 1
#
interface GigabitEthernet0/0/3
port link-type access
port default vlan 3
#
interface GigabitEthernet0/0/4
#
interface GigabitEthernet0/0/5
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
port hybrid pvid vlan 4
port hybrid untagged vlan 2 4
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
#
return
[s2]display current-configuration
#
sysname s2
#
vlan batch 2 to 4
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password simple admin
local-user admin service-type http
#
interface Vlanif1
#
interface MEth0/0/1
#
interface Eth-Trunk1
port link-type trunk
port trunk allow-pass vlan 2 to 4094
mode lacp-static
#
interface GigabitEthernet0/0/1
eth-trunk 1
#
interface GigabitEthernet0/0/2
eth-trunk 1
#
interface GigabitEthernet0/0/3
port hybrid pvid vlan 2
port hybrid untagged vlan 2 4
#
interface GigabitEthernet0/0/4
#
interface GigabitEthernet0/0/5
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
port hybrid pvid vlan 4
port hybrid untagged vlan 2 4
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
#
return
[s3]display current-configuration
#
sysname s3
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password simple admin
local-user admin service-type http
#
interface Vlanif1
ip address 10.0.4.2 255.255.255.0
#
interface MEth0/0/1
#
interface Ethernet0/0/1
#
interface Ethernet0/0/2
#
interface Ethernet0/0/3
#
interface Ethernet0/0/4
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface Ethernet0/0/9
#
interface Ethernet0/0/10
#
interface Ethernet0/0/11
#
interface Ethernet0/0/12
#
interface Ethernet0/0/13
#
interface Ethernet0/0/14
#
interface Ethernet0/0/15
#
interface Ethernet0/0/16
#
interface Ethernet0/0/17
#
interface Ethernet0/0/18
#
interface Ethernet0/0/19
#
interface Ethernet0/0/20
#
interface Ethernet0/0/21
#
interface Ethernet0/0/22
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
#
return
[s4]display current-configuration
#
sysname s4
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password simple admin
local-user admin service-type http
#
interface Vlanif1
ip address 10.0.4.4 255.255.255.0
#
interface MEth0/0/1
#
interface Ethernet0/0/1
#
interface Ethernet0/0/2
#
interface Ethernet0/0/3
#
interface Ethernet0/0/4
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface Ethernet0/0/9
#
interface Ethernet0/0/10
#
interface Ethernet0/0/11
#
interface Ethernet0/0/12
#
interface Ethernet0/0/13
#
interface Ethernet0/0/14
#
interface Ethernet0/0/15
#
interface Ethernet0/0/16
#
interface Ethernet0/0/17
#
interface Ethernet0/0/18
#
interface Ethernet0/0/19
#
interface Ethernet0/0/20
#
interface Ethernet0/0/21
#
interface Ethernet0/0/22
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
#
return