链路聚合（路由）

<H3C>SYS

[H3C]introu

[H3C]int Route-Aggregation 1 建组

[H3C-Route-Aggregation1]int g 0/0

[H3C-GigabitEthernet0/0]portlink-aggregation group 1 端口加组中

[H3C-GigabitEthernet0/0]int g 0/1

[H3C-GigabitEthernet0/1]portlink-aggregation group 1

[H3C-GigabitEthernet0/1]qu

[H3C]dis link-aggregationverbose 查看

Loadsharing Type: Shar -- Loadsharing, NonS-- Non-Loadsharing

Port Status: S -- Selected, U --Unselected, I -- Individual

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregate Interface: Route-Aggregation1

Aggregation Mode: Static

Loadsharing Type: Shar

Port Status Priority Oper-Key

--------------------------------------------------------------------------------

GE0/0 S 32768 1

GE0/1 S 32768 1

[H3C]int Route-Aggregation 1

[H3C-Route-Aggregation1]ip add 192.168.1.324 给组给IP

[H3C-Route-Aggregation1]

<H3C>sys

System View: return to User View withCtrl+Z.

[H3C]

[H3C]ping 192.168.1.2

Ping 192.168.1.2 (192.168.1.2): 56 databytes, press CTRL_C to break

56 bytes from 192.168.1.2: icmp_seq=0ttl=255 time=0.865 ms

56 bytes from 192.168.1.2: icmp_seq=1ttl=255 time=0.455 ms

56 bytes from 192.168.1.2: icmp_seq=2ttl=255 time=0.445 ms

56 bytes from 192.168.1.2: icmp_seq=3ttl=255 time=0.461 ms

56 bytes from 192.168.1.2: icmp_seq=4ttl=255 time=0.461 ms

--- Ping statistics for 192.168.1.2 ---

5 packets transmitted, 5 packets received,0.0% packet loss

round-trip min/avg/max/std-dev =0.445/0.537/0.865/0.164 ms

[H3C]%Aug 25 10:57:31:396 2016 H3C PING/6/PING_STATISTICS:Ping statistics for 192.168.1.2: 5 packets transmitted, 5 packets received,0.0% packet loss, round-trip min/avg/max/std-dev = 0.445/0.537/0.865/0.164 ms.

<H3C>sys

[H3C]intRoute-Aggregation 1

[H3C-Route-Aggregation1]int g 0/0

[H3C-GigabitEthernet0/0]portlink-aggregation group 1

[H3C-GigabitEthernet0/0]intg 0/1

[H3C-GigabitEthernet0/1]portlink-aggregation group 1

[H3C-GigabitEthernet0/1]exi

[H3C-GigabitEthernet0/1]qu

[H3C]dislink-aggregation verbose

Loadsharing Type: Shar -- Loadsharing, NonS-- Non-Loadsharing

Port Status: S -- Selected, U --Unselected, I -- Individual

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregate Interface: Route-Aggregation1

Aggregation Mode: Static

Loadsharing Type: Shar

Port Status Priority Oper-Key

--------------------------------------------------------------------------------

GE0/0 S 32768 1

GE0/1 S 32768 1

[H3C]intRoute-Aggregation 1

[H3C-Route-Aggregation1]ipaddress 192.168.1.2 24

[H3C-Route-Aggregation1]exi

[H3C-Route-Aggregation1]qu

[H3C]ping 192.168.1.3

Ping 192.168.1.3 (192.168.1.3): 56 databytes, press CTRL_C to break

56 bytes from 192.168.1.3: icmp_seq=0ttl=255 time=0.636 ms

56 bytes from 192.168.1.3: icmp_seq=1ttl=255 time=0.465 ms

56 bytes from 192.168.1.3: icmp_seq=2ttl=255 time=0.414 ms

56 bytes from 192.168.1.3: icmp_seq=3ttl=255 time=0.543 ms

56 bytes from 192.168.1.3: icmp_seq=4ttl=255 time=0.453 ms

--- Ping statistics for 192.168.1.3 ---

5 packets transmitted, 5 packets received,0.0% packet loss

round-trip min/avg/max/std-dev =0.414/0.502/0.636/0.079 ms

[H3C]%Aug 25 10:57:55:888 2016 H3CPING/6/PING_STATISTICS: Ping statistics for 192.168.1.3: 5 packets transmitted,5 packets received, 0.0% packet loss, round-trip min/avg/max/std-dev =0.414/0.502/0.636/0.079 ms.

时间： 2024-10-14 09:35:29

链路聚合（路由）的相关文章

单臂路由及链路聚合

单臂路由及链路聚合单臂路由实现不同VLAN间通讯的原理单臂路由重新封装MAC地址.转换vlan标签链路聚合是指将多个物理端口人为汇聚成一个逻辑端口,实现出入吞吐量在各成员端口的负载分担条件端口速率相同,传输介质相同,属于同一个vlan. 原文地址:https://www.cnblogs.com/Dpkg/p/12326959.html

路由交换（四）：链路聚合

链路聚合一.链路聚合理论部分 1. 链路聚合简介链路聚合是将多条物理链路捆绑在一起成为一条逻辑链路,实现提高链路带宽.提高可靠性和负载分担. 2. 链路聚合基本概念链路聚合组:若干条以太链路捆绑在一起所形成的逻辑链路成员接口:组成逻辑链路的物理链路的接口称为成员接口活动接口:逻辑链路中转发数据的成员接口称为活动接口 3. 链路聚合方式链路聚合方式有手工模式和LACP模式.手工模式下,Eth-Trunk的建立.成员接口的加入由手工配置,没有链路聚合控制协议LACP的参与.当需要在两个直连设

关于在链路聚合下做smart，monitor link的转发测试

这次又要开始瞎折腾了.没事找事了.毕竟我还是很无聊的: 这个实验主要要涉及到以下几个方面: 1.gvrp的应用: 2.Smart Link与Monitor Link的配置: 3.链路聚合: 先复习一波基本知识: GVRP: GVRP(GARP VLAN Registration Protocol) GARP VLAN注册协议 GARP(Generic Attribute Registration Protocol 通用属性注册协议可以让交换机之间能够相互交换VLAN配置信息,动态创建和管理VL

linux 记一次链路聚合

前言: 将多个linux网络端口绑定为1个,可以提升网络性能.公司做了glusterfs网络文件系统,读写都在一块网卡上,导致I/O很低,最后决定做链路聚合来提升服务器的网络吞吐(I/O)可以使用linux teaming 或 bond模块.目前发布的各个linux版本内核均已包含了该模块,大多数情况下不需要重新编译内核.公司的系统是centos6.5,使用bonding模块.Bonding模块提供了绑定/集成多个网卡作为一个虚拟逻辑网口的功能.本次采用了模式0负载均衡模式,常用的还有1冗余模式

【思科】DHCP 、RIP、链路聚合、ACL访问控制列表综合实验

实验拓扑: R3为网关,R4为出口路由器,并且为DHCP路由器,R5为外网一台路由器实验要求:1.三台PC属于3个vlan 2.R1,R2做链路聚合 3.网关终结在R3,实现vlan间路由 4.c1,c2,c3通过dhcp服务器获得IP 5.只允许外网路由器R5来远程管理R3 实验步骤: 首先配置R1 R1#conf t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#no ip routing

华为交换机实现vrrp、dhcp、mstp及链路聚合

华为交换机实现DHCP .VRRP.MSTP及链路聚合接入层为普通的交换机,汇聚层实现VRRP和MSTP.划分vlan10.vlan20.vlan30.vlan100及vlan101.其中vlan10.vlan20及vlan30作为用户接,vlan100为服务器接入,vlan101为管理vlan.实现vlan10的数据经过HJA交换机达到HX,vlan20的数据通过HJB交换机到达HX.Cloud1另一端连接了08server一台虚拟机,实现dhcp自动分配功能. Ip规划: Vlan10:1

七厂节目接入，中兴交换机链路聚合配置

需求:从数字电视机房核心交换机引出复用器IP组播信号,将前端节目信号传输至七厂交换机中兴5950,因带宽不够用,需做链路聚合,并通过NSG重新调制输出.中兴5950交换机配置如下: Building configuration... ! ! vlan list 1-3 ! interface vlan 1 // 创建vlan1,将其加入smartgroup1 ip address 172.30.101.251 255.255.255.0 out_index

dhcp中继以太网链路聚合

SW2======================================================================================== [sw2]dis cu # sysname sw2 vlan batch 10 20 ------添加vlan # interface Eth-Trunk1 链路聚合 port link-type trunk 把接口设为trunk模式允许v

链路聚合测试

拓扑:cisco 3750====H3C 3600 说明: 1.当3750两个接口都是Pagp,3600两个接口都是Lacp时,port-channel状态为down down. 2.当3750一个接口是Pagp,另一个是Lacp时,两接口不聚合,链路对端以一致的协议通讯. 结论: 配置链路聚合时,链路两端的接口使用的链路聚合协议要一致.

思科2960交换机与Windows server 2012 实现LACP链路聚合

微软的Windows server 2012已经能支持LACP链路聚合了,由于使用链路聚合后可以实现线路的冗余以及带宽增加,在这里我用一台思科的2960做了一个测试,供有兴趣的朋友参考. 实验准备: 思科交换机2960一台.安装server 2012的服务器一台,内有两个千兆网卡,网线两根. 步骤: 1.思科交换机的配置在特权模式下新建链路聚合channel 端口,并将端口加入Vlan sw2960(config)#int port-channel 6 sw2960(config)#switc

链路聚合 （路由）

链路聚合 （路由）的相关文章

链路聚合（路由）

链路聚合（路由）的相关文章