Debian8修改启动默认运行级别

Two things you need to know:

1) Systemd boots towards the target given by "default.target". This is typically a symbolic link to the actual target file.

2) Systemd keeps it‘s targets in /lib/systemd/system and /etc/systemd/system. A file in /etc/systemd/system takes precedence over those shipped with the OS in /lib/systemd/system -- the intent is that /etc/systemd is used by systems administrators and /lib/systemd is used by distributions.

Debian as-shipped boots towards the graphical target. You can see this yourself:

$ ls -l /etc/systemd/system/default.target
... No such file or directory
$ ls -l /lib/systemd/system/default.target
... /lib/systemd/system/default.target -> graphical.target

So to boot towards the multiuser target all you need do is to put in own target:

$ cd /etc/systemd/system/
$ sudo ln -s /lib/systemd/system/multi-user.target default.target

时间： 2024-10-06 01:49:24

Debian8修改启动默认运行级别的相关文章

RHEL7默认运行级别和终端分辨率修改

第三运行级别:multi-user.target 第五运行级别:graphical.target #前者是符号连接指向老大后面的target runlevel3.target -> multi-user.target runlevel5.target -> graphical.target █修改开机默认运行级别: ●方法1: 默认级别转换为3(文本模式) ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/defa

RHEL7.0默认运行级别

修改默认运行级别: rhel7.0 做了很多大的改变,打开inittab看下 # inittab is no longer used when using systemd. /etc/inittab 这个文件已经不再使用systemd,对linux来说,就是一个init程序,可以作为sysVinit和Upstat的替代. systemd使用比sysvinit的运行级别更为自由的target概念作为替代第三运行级:multi-user.target 第五运行级:graphical.target

关于Ubuntu修改默认运行级别

第一种方法:(内核级别的) Sudo vi /etc/default/grub 修改GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash” 为:GRUB_CMDLINE_LINUX_DEFAULT=” text” 然后运行下sudo update-grub2就可了第二种方法:(基于upstart的”正统”方法) ubuntu的upstart的体系下,/etc/init.d里面基本上都是连接到/lib/init/upstart-job的软连接,所以,对 initscr

Centos修改默认运行级别

一.centos默认运行级别 # Default runlevel. The runlevels used are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11

Redhat 7修改默认运行级别方法 --RHEL7使用systemd创建符号链接指向默认运行级别

今天装了下正式版的RHEL7,发现熟悉的inittab中没有了修改默认运行级别,打开inittab如下 [[email protected] init.d]# vi /etc/inittab # inittab is no longer used when using systemd. # # ADDING CONFIGURATION HERE WILL HAVE NO EFFECT ON YOUR SYSTEM. # # Ctrl-Alt-Delete is handled by /etc/s

centos 7 修改默认运行级别

查看当前运行级别: # runlevel 修改默认运行级别: #systemctl set-default multi-user.target //修改为级别3(文本模式) 各运行级别: runlevel0.target => poweroff.target runlevel1.target => rescue.target runlevel2.target => multi-user.target runlevel3.target => multi-user.target

CentOS 7修改默认运行级别

修改系统启动默认界面,执行如下: 1,字符界面: #ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target 2,图形界面: #ln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.target CentOS 7修改默认运行级别

CentOS 7.4 修改默认运行级别

修改CentOS 7.4 默认运行级别版本:CentOS 7.4,安装的开发和开发库,默认运行级别是桌面,修改为命令行界面.1.查看inittab文件,命令:vi /etc/inittab命令:systemctl get-default(查看当前默认模式)命令:systemctl set-default multi-user.target(设置默认模式为3,及命令行模式)命令:reboot(重启),重启服务器生效原文地址:http://blog.51cto.com/6707135/209296

Centos 7设定默认运行级别

Centos7 中不再是使用 /etc/inittab 来配置运行级别,而是使用 systemd 来进行管理 [[email protected] ~]# ll /lib/systemd/system/runlevel3.target lrwxrwxrwx. 1 root root 17 Feb 23 10:08 /lib/systemd/system/runlevel3.target -> multi-user.target [[email protected] ~]# ll /lib/sys