Bsim3 学习笔记8

Temperature Dependence Model

A number of important model parameters such as mobility, threshold voltage, saturation velocity, parasitic series resistance, and source/drain junctions characteristics are temperature dependent.

Temperature dependence of mobility

Temperature dependence of the threshold voltage

Temperature dependence of the saturation velocity

Temperature dependence of the parasitic drain/source resistances

Temperature dependence of the S/D diode characteristics

时间: 2024-10-12 21:31:38

Bsim3 学习笔记8的相关文章

Bsim3 学习笔记9

Non-quasi Static (NQS) Model An non-quasi-static (NQS) model is desirable in some mixed signal IC and radio frequency (RF) applications. For long channel devices the channel transit time is roughly inversely proportional to (Vgs -Vth) and proportiona

Bsim3 学习笔记6

Noise Model Good noise models in circuit simulators are critical to analog and RF applications. Two types of noise, thermal and flicker, are important in a MOSFET. Flicker Noise The basic characteristic of flicker noise is a 1/? spectral density. The

Bsim3 学习笔记11

Model Testing Requirements for a MOSFET Model in Circuit Simulation (1) It should include most or all of the important physical effects in modern MOSFETs. (2) The model should meet the requirements for accuracy and continuity of the I-V equations and

Bsim3 学习笔记1

Normal short channel effects The threshold voltage of a long channel device is independent of the channel length L and the drain voltage Vd . Vth decreases as L decreases or Vd increases. The dependence of Vth on L and Vds in short-channel devices ca

Bsim3 学习笔记4

Capacitance model Depending on the magnitude of the time-varying voltages, the dynamic operation can be classified as large signal operation or small signal operation. a capacitance model describing the intrinsic and extrinsic components of the devic

Bsim3 学习笔记12

Model Parameter Extraction 提取 There are two different optimization strategies which can be used for parameter extraction: global optimization and local optimization. Global optimization lets the computer find one set of parameters which best fit all

Bsim3 学习笔记2

Threshold voltage model Vth对器件操作有三种操作区: Vg>>Vth in strong inversion region, drift current is dominant. Vg<<Vth in weak inversion region, diffusion current is dominant. Vg≈Vth in moderate inversion region, both drift and diffusion current are i

Bsim3 学习笔记3

I-V model Channel charge and mobility, which are the two key factors influencing the I-V characteristics. The drift current components due to the electric field E. The diffusion current components due to the carrier concentration gradient. Channel Ch

Bsim3 学习笔记7

Source/Drain Parasitics Model 源漏寄生模型 Parasitic Components in a MOSFET the gate resistance Rg gate/source overlap capacitance Cgso gate/drain overlap capacitance Cgdo gate/bulk overlap capacitance Cgbo source series resistance Rs drain series resistan