Flume配置案例

问题导读
1.什么是flume
2.flume的官方网站在哪里？
3.flume有哪些术语？
4.如何配置flume数据源码？

一、什么是Flume?　　

flume 作为 cloudera 开发的实时日志收集系统，受到了业界的认可与广泛应用。Flume 初始的发行版本目前被统称为 Flume OG（original generation），属于 cloudera。但随着 FLume 功能的扩展，Flume OG 代码工程臃肿、核心组件设计不合理、核心配置不标准等缺点暴露出来，尤其是在 Flume OG 的最后一个发行版本 0.94.0 中，日志传输不稳定的现象尤为严重，为了解决这些问题，2011 年 10 月 22 号，cloudera 完成了 Flume-728，对 Flume 进行了里程碑式的改动：重构核心组件、核心配置以及代码架构，重构后的版本统称为 Flume NG（next generation）；改动的另一原因是将 Flume 纳入 apache 旗下，cloudera Flume 改名为 Apache Flume。

1.1  flume的特点：　

　flume是一个分布式、可靠、和高可用的海量日志采集、聚合和传输的系统。支持在日志系统中定制各类数据发送方，用于收集数据;同时，Flume提供对数据进行简单处理，并写到各种数据接受方(比如文本、HDFS、Hbase等)的能力 。　　flume的数据流由事件(Event)贯穿始终。事件是Flume的基本数据单位，它携带日志数据(字节数组形式)并且携带有头信息，这些Event由Agent外部的Source生成，当Source捕获事件后会进行特定的格式化，然后Source会把事件推入(单个或多个)Channel中。你可以把Channel看作是一个缓冲区，它将保存事件直到Sink处理完该事件。Sink负责持久化日志或者把事件推向另一个Source。

1.2 flume的可靠性 　　

当节点出现故障时，日志能够被传送到其他节点上而不会丢失。Flume提供了三种级别的可靠性保障，从强到弱依次分别为：end-to-end（收到数据agent首先将event写到磁盘上，当数据传送成功后，再删除；如果数据发送失败，可以重新发送。），Store on failure（这也是scribe采用的策略，当数据接收方crash时，将数据写到本地，待恢复后，继续发送），Besteffort（数据发送到接收方后，不会进行确认）。

1.3 flume的可恢复性：　

　还是靠Channel。推荐使用FileChannel，事件持久化在本地文件系统里(性能较差)。

1.4 flume的一些核心概念：

  1. Agent        使用JVM 运行Flume。每台机器运行一个agent，但是可以在一个agent中包含多个sources和sinks。
  2. Client        生产数据，运行在一个独立的线程。
  3. Source        从Client收集数据，传递给Channel。
  4. Sink        从Channel收集数据，运行在一个独立线程。
  5. Channel        连接 sources 和 sinks ，这个有点像一个队列。
  6. Events        可以是日志记录、 avro 对象等。

　　Flume以agent为最小的独立运行单位。一个agent就是一个JVM。单agent由Source、Sink和Channel三大组件构成，如下图：

　　值得注意的是，Flume提供了大量内置的Source、Channel和Sink类型。不同类型的Source,Channel和Sink可以自由组合。组合方式基于用户设置的配置文件，非常灵活。比如：Channel可以把事件暂存在内存里，也可以持久化到本地硬盘上。Sink可以把日志写入HDFS, HBase，甚至是另外一个Source等等。Flume支持用户建立多级流，也就是说，多个agent可以协同工作，并且支持Fan-in、Fan-out、Contextual Routing、Backup Routes，这也正是NB之处。如下图所示:

二、flume的官方网站在哪里？　

　http://flume.apache.org/

三、在哪里下载？

　http://www.apache.org/dyn/closer.lua/flume/1.6.0/apache-flume-1.6.0-bin.tar.gz

四、如何安装？

1)将下载的flume包，解压到/home/hadoop目录中，你就已经完成了50%：）简单吧
2)修改 flume-env.sh 配置文件,主要是JAVA_HOME变量设置

1 #/etc/profile增加环境变量

export FLUME_HOME=/home/hadoop/apache-flume-1.6.0-bin

export FLUME_CONF_DIR=$FLUME_HOME/conf

export PATH=.:$PATH::$FLUME_HOME/bin

3)验证是否安装成功

  1. [email protected]:/home/hadoop# flume-ng version
  2. Flume 1.6.0
  3. Source code repository: https://git-wip-us.apache.org/repos/asf/flume.git
  4. Revision: 8633220df808c4cd0c13d1cf0320454a94f1ea97
  5. Compiled by hshreedharan on Wed May  7 14:49:18 PDT 2014
  6. From source with checksum a01fe726e4380ba0c9f7a7d222db961f
  7. [email protected]:/home/hadoop#

复制代码

　　　　出现上面的信息，表示安装成功了

五、flume的案例　　　　

1)案例1：Avro　

　　　Avro可以发送一个给定的文件给Flume，Avro 源使用AVRO RPC机制。
　　　　　　a)创建agent配置文件

  1. [email protected]:/home/hadoop#vi /home/hadoop/flume-1.6.0-bin/conf/avro.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = avro
  7. a1.sources.r1.channels = c1
  8. a1.sources.r1.bind = 0.0.0.0
  9. a1.sources.r1.port = 4141
  10. # Describe the sink
  11. a1.sinks.k1.type = logger
  12. # Use a channel which buffers events in memory
  13. a1.channels.c1.type = memory
  14. a1.channels.c1.capacity = 1000
  15. a1.channels.c1.transactionCapacity = 100
  16. # Bind the source and sink to the channel
  17. a1.sources.r1.channels = c1
  18. a1.sinks.k1.channel = c1

复制代码

b)启动flume agent a1

  1. [email protected]:flume-1.6.0-bin # flume-ng agent -c conf -f conf/avro.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

#命令参数说明

-c conf 指定配置目录为conf

-f conf/avro.conf 指定配置文件为conf/avro.conf     (注意路径，当前路径与配置所指的路径)

-n a1 指定agent名字为a1,需要与avro.conf中的一致

-Dflume.root.logger=INFO,console 指定DEBUF模式在console输出INFO信息

c)创建指定文件

  1. [email protected]:/home/hadoop# echo "hello world" > /home/hadoop/flume-1.6.0-bin/log.00

复制代码

d)使用avro-client发送文件

  1. [email protected]:/home/hadoop# flume-ng avro-client -c . -H m1 -p 4141 -F /home/hadoop/flume-1.5.0-bin/log.00

复制代码

注意参数中m1

e)在m1的控制台，可以看到以下信息，注意最后一行：

  1. [email protected]:/home/hadoop/flume-1.5.0-bin/conf# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/avro.conf -n a1 -Dflume.root.logger=INFO,console
  2. Info: Sourcing environment configuration script /home/hadoop/flume-1.5.0-bin/conf/flume-env.sh
  3. Info: Including Hadoop libraries found via (/home/hadoop/hadoop-2.2.0/bin/hadoop) for HDFS access
  4. Info: Excluding /home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-api-1.7.5.jar from classpath
  5. Info: Excluding /home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-log4j12-1.7.5.jar from classpath
  6. ...
  7. 2014-08-10 10:43:25,112 (New I/O  worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.handleUpstream(NettyServer.java:171)] [id: 0x92464c4f, /192.168.1.50:59850 :> /192.168.1.50:4141] UNBOUND
  8. 2014-08-10 10:43:25,112 (New I/O  worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.handleUpstream(NettyServer.java:171)] [id: 0x92464c4f, /192.168.1.50:59850 :> /192.168.1.50:4141] CLOSED
  9. 2014-08-10 10:43:25,112 (New I/O  worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.channelClosed(NettyServer.java:209)] Connection to /192.168.1.50:59850 disconnected.
  10. 2014-08-10 10:43:26,718 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 68 65 6C 6C 6F 20 77 6F 72 6C 64                hello world }

复制代码

2)案例2：Spool　　　

Spool监测配置的目录下新增的文件，并将文件中的数据读取出来。需要注意两点：　

1) 拷贝到spool目录下的文件不可以再打开编辑。
2) spool目录下不可包含相应的子目录
a)创建agent配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/spool.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = spooldir
  7. a1.sources.r1.channels = c1
  8. a1.sources.r1.spoolDir = /home/hadoop/flume-1.5.0-bin/logs
  9. a1.sources.r1.fileHeader = true
  10. # Describe the sink
  11. a1.sinks.k1.type = logger
  12. # Use a channel which buffers events in memory
  13. a1.channels.c1.type = memory
  14. a1.channels.c1.capacity = 1000
  15. a1.channels.c1.transactionCapacity = 100
  16. # Bind the source and sink to the channel
  17. a1.sources.r1.channels = c1
  18. a1.sinks.k1.channel = c1

复制代码

b)启动flume agent a1

  1. [email protected]:apache-flume-1.6.0-bin#  flume-ng agent -c conf -f conf/spool.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

c)追加文件到/home/hadoop/flume-1.5.0-bin/logs目录

  1. [email protected]:/home/hadoop# echo "spool test1" > /home/hadoop/flume-1.5.0-bin/logs/spool_text.log

复制代码

d)在m1的控制台，可以看到以下相关信息：

  1. 14/08/10 11:37:13 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
  2. 14/08/10 11:37:13 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
  3. 14/08/10 11:37:14 INFO avro.ReliableSpoolingFileEventReader: Preparing to move file /home/hadoop/flume-1.5.0-bin/logs/spool_text.log to /home/hadoop/flume-1.5.0-bin/logs/spool_text.log.COMPLETED
  4. 14/08/10 11:37:14 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
  5. 14/08/10 11:37:14 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
  6. 14/08/10 11:37:14 INFO sink.LoggerSink: Event: { headers:{file=/home/hadoop/flume-1.5.0-bin/logs/spool_text.log} body: 73 70 6F 6F 6C 20 74 65 73 74 31                spool test1 }
  7. 14/08/10 11:37:15 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
  8. 14/08/10 11:37:15 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
  9. 14/08/10 11:37:16 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
  10. 14/08/10 11:37:16 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
  11. 14/08/10 11:37:17 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.

复制代码

3)案例3：Exec

EXEC执行一个给定的命令获得输出的源,如果要使用tail命令，必选使得file足够大才能看到输出内容

a)创建agent配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/exec_tail.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = exec
  7. a1.sources.r1.channels = c1
  8. a1.sources.r1.command = tail -F /home/hadoop/flume-1.5.0-bin/log_exec_tail
  9. # Describe the sink
  10. a1.sinks.k1.type = logger
  11. # Use a channel which buffers events in memory
  12. a1.channels.c1.type = memory
  13. a1.channels.c1.capacity = 1000
  14. a1.channels.c1.transactionCapacity = 100
  15. # Bind the source and sink to the channel
  16. a1.sources.r1.channels = c1
  17. a1.sinks.k1.channel = c1

复制代码

b)启动flume agent a1

  1. [email protected]:apache-flume-1.6.0-bin# flume-ng agent -c conf -f conf/exec_tail.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

c)生成足够多的内容在文件里

  1. [email protected]:/home/hadoop# for i in {1..1000}
    > do
    > echo "exec tail$i" >> /home/hadoop/apache-flume-1.6.0-bin/log_exec_tail
    > done

e)在m1的控制台，可以看到以下信息：

  1. 2014-08-10 10:59:25,513 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 20 74 65 73 74       exec tail test }
  2. 2014-08-10 10:59:34,535 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 20 74 65 73 74       exec tail test }
  3. 2014-08-10 11:01:40,557 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 31                   exec tail1 }
  4. 2014-08-10 11:01:41,180 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 32                   exec tail2 }
  5. 2014-08-10 11:01:41,180 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 33                   exec tail3 }
  6. 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 34                   exec tail4 }
  7. 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 35                   exec tail5 }
  8. 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 36                   exec tail6 }
  9. ....
  10. ....
  11. ....
  12. 2014-08-10 11:01:51,550 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 36                exec tail96 }
  13. 2014-08-10 11:01:51,550 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 37                exec tail97 }
  14. 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 38                exec tail98 }
  15. 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 39                exec tail99 }
  16. 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 31 30 30             exec tail100 }

复制代码

4)案例4：Syslogtcp

Syslogtcp监听TCP的端口做为数据源
a)创建agent配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = syslogtcp
  7. a1.sources.r1.port = 5140
  8. a1.sources.r1.host = localhost
  9. a1.sources.r1.channels = c1
  10. # Describe the sink
  11. a1.sinks.k1.type = logger
  12. # Use a channel which buffers events in memory
  13. a1.channels.c1.type = memory
  14. a1.channels.c1.capacity = 1000
  15. a1.channels.c1.transactionCapacity = 100
  16. # Bind the source and sink to the channel
  17. a1.sources.r1.channels = c1
  18. a1.sinks.k1.channel = c1

复制代码

b)启动flume agent a1

  1. [email protected]:apache-flume-1.6.0-bin# flume-ng agent -c conf -f conf/syslog_tcp.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

c)测试产生syslog

  1. [email protected]:apache-flume-1.6.0-bin # echo "hello idoall.org syslog" | nc localhost 5140

复制代码

注：以上命令需安装netcat，

安装方法：yum search nc    查找相关nc源，如找到nc.i686

再执行：yum install nc.i686

d)在m1的控制台，可以看到以下信息：

  1. 14/08/10 11:41:45 INFO node.PollingPropertiesFileConfigurationProvider: Reloading configuration file:/home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf
  2. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Added sinks: k1 Agent: a1
  3. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Processing:k1
  4. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Processing:k1
  5. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Post-validation flume configuration contains configuration for agents: [a1]
  6. 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Creating channels
  7. 14/08/10 11:41:45 INFO channel.DefaultChannelFactory: Creating instance of channel c1 type memory
  8. 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Created channel c1
  9. 14/08/10 11:41:45 INFO source.DefaultSourceFactory: Creating instance of source r1, type syslogtcp
  10. 14/08/10 11:41:45 INFO sink.DefaultSinkFactory: Creating instance of sink: k1, type: logger
  11. 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Channel c1 connected to [r1, k1]
  12. 14/08/10 11:41:45 INFO node.Application: Starting new configuration:{ sourceRunners:{r1=EventDrivenSourceRunner: { source:org.apache.flume.source.SyslogTcpSource{name:r1,state:IDLE} }} sinkRunners:{k1=SinkRunner: { policy:[email protected] counterGroup:{ name:null counters:{} } }} channels:{c1=org.apache.flume.channel.MemoryChannel{name: c1}} }
  13. 14/08/10 11:41:45 INFO node.Application: Starting Channel c1
  14. 14/08/10 11:41:45 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.
  15. 14/08/10 11:41:45 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started
  16. 14/08/10 11:41:45 INFO node.Application: Starting Sink k1
  17. 14/08/10 11:41:45 INFO node.Application: Starting Source r1
  18. 14/08/10 11:41:45 INFO source.SyslogTcpSource: Syslog TCP Source starting...
  19. 14/08/10 11:42:15 WARN source.SyslogUtils: Event created from Invalid Syslog data.
  20. 14/08/10 11:42:15 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 68 65 6C 6C 6F 20 69 64 6F 61 6C 6C 2E 6F 72 67 hello idoall.org }

复制代码

5)案例5：JSONHandler

a)创建agent配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/post_json.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = org.apache.flume.source.http.HTTPSource
  7. a1.sources.r1.port = 8888
  8. a1.sources.r1.channels = c1
  9. # Describe the sink
  10. a1.sinks.k1.type = logger
  11. # Use a channel which buffers events in memory
  12. a1.channels.c1.type = memory
  13. a1.channels.c1.capacity = 1000
  14. a1.channels.c1.transactionCapacity = 100
  15. # Bind the source and sink to the channel
  16. a1.sources.r1.channels = c1
  17. a1.sinks.k1.channel = c1

复制代码

b)启动flume agent a1

  1. [email protected]:/home/hadoop# flume-ng agent -c conf -f /home/hadoop/flume-1.5.0-bin/conf/post_json.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

c)生成JSON 格式的POST request

  1. [email protected]:/home/hadoop# curl -X POST -d ‘[{ "headers" :{"a" : "a1","b" : "b1"},"body" : "idoall.org_body"}]‘ http://localhost:8888

复制代码

d)在m1的控制台，可以看到以下信息：

  1. 14/08/10 11:49:59 INFO node.Application: Starting Channel c1
  2. 14/08/10 11:49:59 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.
  3. 14/08/10 11:49:59 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started
  4. 14/08/10 11:49:59 INFO node.Application: Starting Sink k1
  5. 14/08/10 11:49:59 INFO node.Application: Starting Source r1
  6. 14/08/10 11:49:59 INFO mortbay.log: Logging to org.slf4j.impl.Log4jLoggerAdapter(org.mortbay.log) via org.mortbay.log.Slf4jLog
  7. 14/08/10 11:49:59 INFO mortbay.log: jetty-6.1.26
  8. 14/08/10 11:50:00 INFO mortbay.log: Started [email protected]:8888
  9. 14/08/10 11:50:00 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
  10. 14/08/10 11:50:00 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
  11. 14/08/10 12:14:32 INFO sink.LoggerSink: Event: { headers:{b=b1, a=a1} body: 69 64 6F 61 6C 6C 2E 6F 72 67 5F 62 6F 64 79    idoall.org_body }

复制代码

6)案例6：Hadoop sink  (需配置Hadoop)  以下还未测试

a)创建agent配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/hdfs_sink.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = syslogtcp
  7. a1.sources.r1.port = 5140
  8. a1.sources.r1.host = localhost
  9. a1.sources.r1.channels = c1
  10. # Describe the sink
  11. a1.sinks.k1.type = hdfs
  12. a1.sinks.k1.channel = c1
  13. a1.sinks.k1.hdfs.path = hdfs://m1:9000/user/flume/syslogtcp
  14. a1.sinks.k1.hdfs.filePrefix = Syslog
  15. a1.sinks.k1.hdfs.round = true
  16. a1.sinks.k1.hdfs.roundValue = 10
  17. a1.sinks.k1.hdfs.roundUnit = minute
  18. # Use a channel which buffers events in memory
  19. a1.channels.c1.type = memory
  20. a1.channels.c1.capacity = 1000
  21. a1.channels.c1.transactionCapacity = 100
  22. # Bind the source and sink to the channel
  23. a1.sources.r1.channels = c1
  24. a1.sinks.k1.channel = c1

复制代码

b)启动flume agent a1

  1. [email protected]:apache-flume-1.6.0-bin# flume-ng agent -c conf -f /home/hadoop/flume-1.5.0-bin/conf/hdfs_sink.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

c)测试产生syslog

  1. [email protected]:/home/hadoop# echo "hello idoall flume -> hadoop testing one" | nc localhost 5140

复制代码

d)在m1的控制台，可以看到以下信息：

  1. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.
  2. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started
  3. 14/08/10 12:20:39 INFO node.Application: Starting Sink k1
  4. 14/08/10 12:20:39 INFO node.Application: Starting Source r1
  5. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SINK, name: k1: Successfully registered new MBean.
  6. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Component type: SINK, name: k1 started
  7. 14/08/10 12:20:39 INFO source.SyslogTcpSource: Syslog TCP Source starting...
  8. 14/08/10 12:21:46 WARN source.SyslogUtils: Event created from Invalid Syslog data.
  9. 14/08/10 12:21:49 INFO hdfs.HDFSSequenceFile: writeFormat = Writable, UseRawLocalFileSystem = false
  10. 14/08/10 12:21:49 INFO hdfs.BucketWriter: Creating hdfs://m1:9000/user/flume/syslogtcp//Syslog.1407644509504.tmp
  11. 14/08/10 12:22:20 INFO hdfs.BucketWriter: Closing hdfs://m1:9000/user/flume/syslogtcp//Syslog.1407644509504.tmp
  12. 14/08/10 12:22:20 INFO hdfs.BucketWriter: Close tries incremented
  13. 14/08/10 12:22:20 INFO hdfs.BucketWriter: Renaming hdfs://m1:9000/user/flume/syslogtcp/Syslog.1407644509504.tmp to hdfs://m1:9000/user/flume/syslogtcp/Syslog.1407644509504
  14. 14/08/10 12:22:20 INFO hdfs.HDFSEventSink: Writer callback called.

复制代码

e)在m1上再打开一个窗口，去hadoop上检查文件是否生成

  1. [email protected]:/home/hadoop# /home/hadoop/hadoop-2.2.0/bin/hadoop fs -ls /user/flume/syslogtcp
  2. Found 1 items
  3. -rw-r--r--   3 root supergroup        155 2014-08-10 12:22 /user/flume/syslogtcp/Syslog.1407644509504
  4. [email protected]:/home/hadoop# /home/hadoop/hadoop-2.2.0/bin/hadoop fs -cat /user/flume/syslogtcp/Syslog.1407644509504
  5. SEQ!org.apache.hadoop.io.LongWritable"org.apache.hadoop.io.BytesWritable^;>Gv$hello idoall flume -> hadoop testing one

复制代码

7)案例7：File Roll Sink　

a)创建agent配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/file_roll.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = syslogtcp
  7. a1.sources.r1.port = 5555
  8. a1.sources.r1.host = localhost
  9. a1.sources.r1.channels = c1
  10. # Describe the sink
  11. a1.sinks.k1.type = file_roll
  12. a1.sinks.k1.sink.directory = /home/hadoop/flume-1.5.0-bin/logs
  13. # Use a channel which buffers events in memory
  14. a1.channels.c1.type = memory
  15. a1.channels.c1.capacity = 1000
  16. a1.channels.c1.transactionCapacity = 100
  17. # Bind the source and sink to the channel
  18. a1.sources.r1.channels = c1
  19. a1.sinks.k1.channel = c1

复制代码

b)启动flume agent a1

  1. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/file_roll.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

c)测试产生log

  1. [email protected]:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5555
  2. [email protected]:/home/hadoop# echo "hello idoall.org syslog 2" | nc localhost 5555

复制代码

d)查看/home/hadoop/flume-1.5.0-bin/logs下是否生成文件,默认每30秒生成一个新文件

  1. [email protected]:/home/hadoop# ll /home/hadoop/flume-1.5.0-bin/logs
  2. 总用量 272
  3. drwxr-xr-x 3 root root   4096 Aug 10 12:50 ./
  4. drwxr-xr-x 9 root root   4096 Aug 10 10:59 ../
  5. -rw-r--r-- 1 root root     50 Aug 10 12:49 1407646164782-1
  6. -rw-r--r-- 1 root root      0 Aug 10 12:49 1407646164782-2
  7. -rw-r--r-- 1 root root      0 Aug 10 12:50 1407646164782-3
  8. [email protected]:/home/hadoop# cat /home/hadoop/flume-1.5.0-bin/logs/1407646164782-1 /home/hadoop/flume-1.5.0-bin/logs/1407646164782-2
  9. hello idoall.org syslog
  10. hello idoall.org syslog 2

复制代码

8)案例8：Replicating Channel Selector

　　Flume支持Fan out流从一个源到多个通道。有两种模式的Fan out，分别是复制和复用。在复制的情况下，流的事件被发送到所有的配置通道。在复用的情况下，事件被发送到可用的渠道中的一个子集。Fan out流需要指定源和Fan out通道的规则。　　　　这次我们需要用到m1,m2两台机器

a)在m1创建replicating_Channel_Selector配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf
  2. a1.sources = r1
  3. a1.sinks = k1 k2
  4. a1.channels = c1 c2
  5. # Describe/configure the source
  6. a1.sources.r1.type = syslogtcp
  7. a1.sources.r1.port = 5140
  8. a1.sources.r1.host = localhost
  9. a1.sources.r1.channels = c1 c2
  10. a1.sources.r1.selector.type = replicating
  11. # Describe the sink
  12. a1.sinks.k1.type = avro
  13. a1.sinks.k1.channel = c1
  14. a1.sinks.k1.hostname = m1
  15. a1.sinks.k1.port = 5555
  16. a1.sinks.k2.type = avro
  17. a1.sinks.k2.channel = c2
  18. a1.sinks.k2.hostname = m2
  19. a1.sinks.k2.port = 5555
  20. # Use a channel which buffers events in memory
  21. a1.channels.c1.type = memory
  22. a1.channels.c1.capacity = 1000
  23. a1.channels.c1.transactionCapacity = 100
  24. a1.channels.c2.type = memory
  25. a1.channels.c2.capacity = 1000
  26. a1.channels.c2.transactionCapacity = 100

复制代码

b)在m1创建replicating_Channel_Selector_avro配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = avro
  7. a1.sources.r1.channels = c1
  8. a1.sources.r1.bind = 0.0.0.0
  9. a1.sources.r1.port = 5555
  10. # Describe the sink
  11. a1.sinks.k1.type = logger
  12. # Use a channel which buffers events in memory
  13. a1.channels.c1.type = memory
  14. a1.channels.c1.capacity = 1000
  15. a1.channels.c1.transactionCapacity = 100
  16. # Bind the source and sink to the channel
  17. a1.sources.r1.channels = c1
  18. a1.sinks.k1.channel = c1

复制代码

c)在m1上将2个配置文件复制到m2上一份

  1. [email protected]:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf [email protected]:/home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf
  2. [email protected]:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf [email protected]:/home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf

复制代码

d)打开4个窗口，在m1和m2上同时启动两个flume agent

  1. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf -n a1 -Dflume.root.logger=INFO,console
  2. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

e)然后在m1或m2的任意一台机器上，测试产生syslog

  1. [email protected]:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5140

复制代码

f)在m1和m2的sink窗口，分别可以看到以下信息,这说明信息得到了同步：

  1. 14/08/10 14:08:18 INFO ipc.NettyServer: Connection to /192.168.1.51:46844 disconnected.
  2. 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] OPEN
  3. 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
  4. 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] CONNECTED: /192.168.1.50:35873
  5. 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] OPEN
  6. 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
  7. 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:46858
  8. 14/08/10 14:09:20 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 68 65 6C 6C 6F 20 69 64 6F 61 6C 6C 2E 6F 72 67 hello idoall.org }

复制代码

9)案例9：Multiplexing Channel Selector　

a)在m1创建Multiplexing_Channel_Selector配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf
  2. a1.sources = r1
  3. a1.sinks = k1 k2
  4. a1.channels = c1 c2
  5. # Describe/configure the source
  6. a1.sources.r1.type = org.apache.flume.source.http.HTTPSource
  7. a1.sources.r1.port = 5140
  8. a1.sources.r1.channels = c1 c2
  9. a1.sources.r1.selector.type = multiplexing
  10. a1.sources.r1.selector.header = type
  11. #映射允许每个值通道可以重叠。默认值可以包含任意数量的通道。
  12. a1.sources.r1.selector.mapping.baidu = c1
  13. a1.sources.r1.selector.mapping.ali = c2
  14. a1.sources.r1.selector.default = c1
  15. # Describe the sink
  16. a1.sinks.k1.type = avro
  17. a1.sinks.k1.channel = c1
  18. a1.sinks.k1.hostname = m1
  19. a1.sinks.k1.port = 5555
  20. a1.sinks.k2.type = avro
  21. a1.sinks.k2.channel = c2
  22. a1.sinks.k2.hostname = m2
  23. a1.sinks.k2.port = 5555
  24. # Use a channel which buffers events in memory
  25. a1.channels.c1.type = memory
  26. a1.channels.c1.capacity = 1000
  27. a1.channels.c1.transactionCapacity = 100
  28. a1.channels.c2.type = memory
  29. a1.channels.c2.capacity = 1000
  30. a1.channels.c2.transactionCapacity = 100

复制代码

b)在m1创建Multiplexing_Channel_Selector_avro配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = avro
  7. a1.sources.r1.channels = c1
  8. a1.sources.r1.bind = 0.0.0.0
  9. a1.sources.r1.port = 5555
  10. # Describe the sink
  11. a1.sinks.k1.type = logger
  12. # Use a channel which buffers events in memory
  13. a1.channels.c1.type = memory
  14. a1.channels.c1.capacity = 1000
  15. a1.channels.c1.transactionCapacity = 100
  16. # Bind the source and sink to the channel
  17. a1.sources.r1.channels = c1
  18. a1.sinks.k1.channel = c1

复制代码

c)将2个配置文件复制到m2上一份

  1. [email protected]:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf  [email protected]:/home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf
  2. [email protected]:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf [email protected]:/home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf

复制代码

d)打开4个窗口，在m1和m2上同时启动两个flume agent

  1. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf -n a1 -Dflume.root.logger=INFO,console
  2. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

e)然后在m1或m2的任意一台机器上，测试产生syslog

  1. [email protected]:/home/hadoop# curl -X POST -d ‘[{ "headers" :{"type" : "baidu"},"body" : "idoall_TEST1"}]‘ http://localhost:5140 && curl -X POST -d ‘[{ "headers" :{"type" : "ali"},"body" : "idoall_TEST2"}]‘ http://localhost:5140 && curl -X POST -d ‘[{ "headers" :{"type" : "qq"},"body" : "idoall_TEST3"}]‘ http://localhost:5140

复制代码

f)在m1的sink窗口，可以看到以下信息：

  1. 14/08/10 14:32:21 INFO node.Application: Starting Sink k1
  2. 14/08/10 14:32:21 INFO node.Application: Starting Source r1
  3. 14/08/10 14:32:21 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...
  4. 14/08/10 14:32:21 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
  5. 14/08/10 14:32:21 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
  6. 14/08/10 14:32:21 INFO source.AvroSource: Avro source r1 started.
  7. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] OPEN
  8. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
  9. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] CONNECTED: /192.168.1.50:35916
  10. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] OPEN
  11. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
  12. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:46945
  13. 14/08/10 14:34:11 INFO sink.LoggerSink: Event: { headers:{type=baidu} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 31             idoall_TEST1 }
  14. 14/08/10 14:34:57 INFO sink.LoggerSink: Event: { headers:{type=qq} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 33             idoall_TEST3 }

复制代码

g)在m2的sink窗口，可以看到以下信息：

  1. 14/08/10 14:32:27 INFO node.Application: Starting Sink k1
  2. 14/08/10 14:32:27 INFO node.Application: Starting Source r1
  3. 14/08/10 14:32:27 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...
  4. 14/08/10 14:32:27 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
  5. 14/08/10 14:32:27 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
  6. 14/08/10 14:32:27 INFO source.AvroSource: Avro source r1 started.
  7. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] OPEN
  8. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
  9. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] CONNECTED: /192.168.1.50:38104
  10. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] OPEN
  11. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
  12. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48599
  13. 14/08/10 14:34:33 INFO sink.LoggerSink: Event: { headers:{type=ali} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 32             idoall_TEST2 }

复制代码

可以看到，根据header中不同的条件分布到不同的channel上

10)案例10：Flume Sink Processors　　

failover的机器是一直发送给其中一个sink，当这个sink不可用的时候，自动发送到下一个sink。

a)在m1创建Flume_Sink_Processors配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf
  2. a1.sources = r1
  3. a1.sinks = k1 k2
  4. a1.channels = c1 c2
  5. #这个是配置failover的关键，需要有一个sink group
  6. a1.sinkgroups = g1
  7. a1.sinkgroups.g1.sinks = k1 k2
  8. #处理的类型是failover
  9. a1.sinkgroups.g1.processor.type = failover
  10. #优先级，数字越大优先级越高，每个sink的优先级必须不相同
  11. a1.sinkgroups.g1.processor.priority.k1 = 5
  12. a1.sinkgroups.g1.processor.priority.k2 = 10
  13. #设置为10秒，当然可以根据你的实际状况更改成更快或者很慢
  14. a1.sinkgroups.g1.processor.maxpenalty = 10000
  15. # Describe/configure the source
  16. a1.sources.r1.type = syslogtcp
  17. a1.sources.r1.port = 5140
  18. a1.sources.r1.channels = c1 c2
  19. a1.sources.r1.selector.type = replicating
  20. # Describe the sink
  21. a1.sinks.k1.type = avro
  22. a1.sinks.k1.channel = c1
  23. a1.sinks.k1.hostname = m1
  24. a1.sinks.k1.port = 5555
  25. a1.sinks.k2.type = avro
  26. a1.sinks.k2.channel = c2
  27. a1.sinks.k2.hostname = m2
  28. a1.sinks.k2.port = 5555
  29. # Use a channel which buffers events in memory
  30. a1.channels.c1.type = memory
  31. a1.channels.c1.capacity = 1000
  32. a1.channels.c1.transactionCapacity = 100
  33. a1.channels.c2.type = memory
  34. a1.channels.c2.capacity = 1000
  35. a1.channels.c2.transactionCapacity = 100

复制代码

b)在m1创建Flume_Sink_Processors_avro配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = avro
  7. a1.sources.r1.channels = c1
  8. a1.sources.r1.bind = 0.0.0.0
  9. a1.sources.r1.port = 5555
  10. # Describe the sink
  11. a1.sinks.k1.type = logger
  12. # Use a channel which buffers events in memory
  13. a1.channels.c1.type = memory
  14. a1.channels.c1.capacity = 1000
  15. a1.channels.c1.transactionCapacity = 100
  16. # Bind the source and sink to the channel
  17. a1.sources.r1.channels = c1
  18. a1.sinks.k1.channel = c1

复制代码

c)将2个配置文件复制到m2上一份

  1. [email protected]:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf  [email protected]:/home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf
  2. [email protected]:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf [email protected]:/home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf

复制代码

d)打开4个窗口，在m1和m2上同时启动两个flume agent

  1. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console
  2. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

e)然后在m1或m2的任意一台机器上，测试产生log

  1. [email protected]:/home/hadoop# echo "idoall.org test1 failover" | nc localhost 5140

复制代码

f)因为m2的优先级高，所以在m2的sink窗口，可以看到以下信息，而m1没有：

  1. 14/08/10 15:02:46 INFO ipc.NettyServer: Connection to /192.168.1.51:48692 disconnected.
  2. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] OPEN
  3. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
  4. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48704
  5. 14/08/10 15:03:26 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }

复制代码

g)这时我们停止掉m2机器上的sink(ctrl+c)，再次输出测试数据：

  1. [email protected]:/home/hadoop# echo "idoall.org test2 failover" | nc localhost 5140

复制代码

h)可以在m1的sink窗口，看到读取到了刚才发送的两条测试数据：

  1. 14/08/10 15:02:46 INFO ipc.NettyServer: Connection to /192.168.1.51:47036 disconnected.
  2. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] OPEN
  3. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
  4. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:47048
  5. 14/08/10 15:07:56 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }
  6. 14/08/10 15:07:56 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }

复制代码

i)我们再在m2的sink窗口中，启动sink：

  1. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

j)输入两批测试数据：

  1. [email protected]:/home/hadoop# echo "idoall.org test3 failover" | nc localhost 5140 && echo "idoall.org test4 failover" | nc localhost 5140

复制代码

k)在m2的sink窗口，我们可以看到以下信息，因为优先级的关系，log消息会再次落到m2上：

  1. 14/08/10 15:09:47 INFO node.Application: Starting Sink k1
  2. 14/08/10 15:09:47 INFO node.Application: Starting Source r1
  3. 14/08/10 15:09:47 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...
  4. 14/08/10 15:09:47 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
  5. 14/08/10 15:09:47 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
  6. 14/08/10 15:09:47 INFO source.AvroSource: Avro source r1 started.
  7. 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] OPEN
  8. 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
  9. 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48741
  10. 14/08/10 15:09:57 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }
  11. 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] OPEN
  12. 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
  13. 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] CONNECTED: /192.168.1.50:38166
  14. 14/08/10 15:10:43 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 33 idoall.org test3 }
  15. 14/08/10 15:10:43 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 34 idoall.org test4 }

复制代码

11)案例11：Load balancing Sink Processor

　load balance type和failover不同的地方是，load balance有两个配置，一个是轮询，一个是随机。两种情况下如果被选择的sink不可用，就会自动尝试发送到下一个可用的sink上面。
a)在m1创建Load_balancing_Sink_Processors配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf
  2. a1.sources = r1
  3. a1.sinks = k1 k2
  4. a1.channels = c1
  5. #这个是配置Load balancing的关键，需要有一个sink group
  6. a1.sinkgroups = g1
  7. a1.sinkgroups.g1.sinks = k1 k2
  8. a1.sinkgroups.g1.processor.type = load_balance
  9. a1.sinkgroups.g1.processor.backoff = true
  10. a1.sinkgroups.g1.processor.selector = round_robin
  11. # Describe/configure the source
  12. a1.sources.r1.type = syslogtcp
  13. a1.sources.r1.port = 5140
  14. a1.sources.r1.channels = c1
  15. # Describe the sink
  16. a1.sinks.k1.type = avro
  17. a1.sinks.k1.channel = c1
  18. a1.sinks.k1.hostname = m1
  19. a1.sinks.k1.port = 5555
  20. a1.sinks.k2.type = avro
  21. a1.sinks.k2.channel = c1
  22. a1.sinks.k2.hostname = m2
  23. a1.sinks.k2.port = 5555
  24. # Use a channel which buffers events in memory
  25. a1.channels.c1.type = memory
  26. a1.channels.c1.capacity = 1000
  27. a1.channels.c1.transactionCapacity = 100

复制代码

b)在m1创建Load_balancing_Sink_Processors_avro配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = avro
  7. a1.sources.r1.channels = c1
  8. a1.sources.r1.bind = 0.0.0.0
  9. a1.sources.r1.port = 5555
  10. # Describe the sink
  11. a1.sinks.k1.type = logger
  12. # Use a channel which buffers events in memory
  13. a1.channels.c1.type = memory
  14. a1.channels.c1.capacity = 1000
  15. a1.channels.c1.transactionCapacity = 100
  16. # Bind the source and sink to the channel
  17. a1.sources.r1.channels = c1
  18. a1.sinks.k1.channel = c1

复制代码

c)将2个配置文件复制到m2上一份

  1. [email protected]:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf  [email protected]:/home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf
  2. [email protected]:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf [email protected]:/home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf

复制代码

d)打开4个窗口，在m1和m2上同时启动两个flume agent

  1. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console
  2. [email protected]:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

e)然后在m1或m2的任意一台机器上，测试产生log，一行一行输入，输入太快，容易落到一台机器上

  1. [email protected]:/home/hadoop# echo "idoall.org test1" | nc localhost 5140
  2. [email protected]:/home/hadoop# echo "idoall.org test2" | nc localhost 5140
  3. [email protected]:/home/hadoop# echo "idoall.org test3" | nc localhost 5140
  4. [email protected]:/home/hadoop# echo "idoall.org test4" | nc localhost 5140

复制代码

f)在m1的sink窗口，可以看到以下信息：

  1. 14/08/10 15:35:29 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }
  2. 14/08/10 15:35:33 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 34 idoall.org test4 }

复制代码

g)在m2的sink窗口，可以看到以下信息：

  1. 14/08/10 15:35:27 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }
  2. 14/08/10 15:35:29 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 33 idoall.org test3 }

复制代码

说明轮询模式起到了作用。

12)案例12：Hbase sink　　　

a)在测试之前，请先参考《ubuntu12.04+hadoop2.2.0+zookeeper3.4.5+hbase0.96.2+hive0.13.1分布式环境部署》将hbase启动
b)然后将以下文件复制到flume中：

  1. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/protobuf-java-2.5.0.jar /home/hadoop/flume-1.5.0-bin/lib
  2. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-client-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
  3. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-common-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
  4. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-protocol-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
  5. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-server-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
  6. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-hadoop2-compat-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
  7. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-hadoop-compat-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/[email protected]@@
  8. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/htrace-core-2.04.jar /home/hadoop/flume-1.5.0-bin/lib

复制代码

c)确保test_idoall_org表在hbase中已经存在
d)在m1创建hbase_simple配置文件

  1. [email protected]:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/hbase_simple.conf
  2. a1.sources = r1
  3. a1.sinks = k1
  4. a1.channels = c1
  5. # Describe/configure the source
  6. a1.sources.r1.type = syslogtcp
  7. a1.sources.r1.port = 5140
  8. a1.sources.r1.host = localhost
  9. a1.sources.r1.channels = c1
  10. # Describe the sink
  11. a1.sinks.k1.type = logger
  12. a1.sinks.k1.type = hbase
  13. a1.sinks.k1.table = test_idoall_org
  14. a1.sinks.k1.columnFamily = name
  15. a1.sinks.k1.column = idoall
  16. a1.sinks.k1.serializer =  org.apache.flume.sink.hbase.RegexHbaseEventSerializer
  17. a1.sinks.k1.channel = memoryChannel
  18. # Use a channel which buffers events in memory
  19. a1.channels.c1.type = memory
  20. a1.channels.c1.capacity = 1000
  21. a1.channels.c1.transactionCapacity = 100
  22. # Bind the source and sink to the channel
  23. a1.sources.r1.channels = c1
  24. a1.sinks.k1.channel = c1

复制代码

e)启动flume agent

  1. /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/hbase_simple.conf -n a1 -Dflume.root.logger=INFO,console

复制代码

f)测试产生syslog

  1. [email protected]:/home/hadoop# echo "hello idoall.org from flume" | nc localhost 5140

复制代码

g)这时登录到hbase中，可以发现新数据已经插入

  1. [email protected]:/home/hadoop# /home/hadoop/hbase-0.96.2-hadoop2/bin/hbase shell
  2. 2014-08-10 16:09:48,984 INFO  [main] Configuration.deprecation: hadoop.native.lib is deprecated. Instead, use io.native.lib.available
  3. HBase Shell; enter ‘help<RETURN>‘ for list of supported commands.
  4. Type "exit<RETURN>" to leave the HBase Shell
  5. Version 0.96.2-hadoop2, r1581096, Mon Mar 24 16:03:18 PDT 2014
  6. hbase(main):001:0> list
  7. TABLE
  8. SLF4J: Class path contains multiple SLF4J bindings.
  9. SLF4J: Found binding in [jar:file:/home/hadoop/hbase-0.96.2-hadoop2/lib/slf4j-log4j12-1.6.4.jar!/org/slf4j/impl/StaticLoggerBinder.class]
  10. SLF4J: Found binding in [jar:file:/home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-log4j12-1.7.5.jar!/org/slf4j/impl/StaticLoggerBinder.class]
  11. SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation.
  12. hbase2hive_idoall
  13. hive2hbase_idoall
  14. test_idoall_org
  15. 3 row(s) in 2.6880 seconds
  16. => ["hbase2hive_idoall", "hive2hbase_idoall", "test_idoall_org"]
  17. hbase(main):002:0> scan "test_idoall_org"
  18. ROW                                                    COLUMN+CELL
  19. 10086                                                 column=name:idoall, timestamp=1406424831473, value=idoallvalue
  20. 1 row(s) in 0.0550 seconds
  21. hbase(main):003:0> scan "test_idoall_org"
  22. ROW                                                    COLUMN+CELL
  23. 10086                                                 column=name:idoall, timestamp=1406424831473, value=idoallvalue
  24. 1407658495588-XbQCOZrKK8-0                            column=name:payload, timestamp=1407658498203, value=hello idoall.org from flume
  25. 2 row(s) in 0.0200 seconds
  26. hbase(main):004:0> quit

复制代码

经过这么多flume的例子测试，如果你全部做完后，会发现flume的功能真的很强大，可以进行各种搭配来完成你想要的工作，俗话说师傅领进门，修行在个人，如何能够结合你的产品业务，将flume更好的应用起来，快去动手实践吧。

原文地址：https://www.cnblogs.com/frankdeng/p/9127545.html

时间： 2024-09-30 04:26:28

Flume配置案例的相关文章

_00017 Flume的体系结构介绍以及Flume入门案例(往HDFS上传数据)

博文作者:妳那伊抹微笑 个性签名:世界上最遥远的距离不是天涯,也不是海角,而是我站在妳的面前,妳却感觉不到我的存在 技术方向:hadoop,数据分析与挖掘 转载声明:可以转载, 但必须以超链接形式标明文章原始出处和作者信息及版权声明,谢谢合作! qq交流群:214293307  (期待与你一起学习,共同进步) # 学习前言 想学习一下Flume,网上找了好多文章基本上都说的很简单,只有一半什么的,简直就是坑爹,饿顿时怒火就上来了,学个东西真不容易,然后自己耐心的把这些零零碎碎的东西整理整理,各种

sersync+rsync实时同步配置案例

目前业内比较靠谱的同步解决方案有: rsync+inotify-tools,Openduckbill+inotify-tools和rsync+sersync 前两者由于是基于脚本语言编写,所以规范程度,执行效率相对rsync+sersync就稍微弱一些. sersync是使用c++编写,基于boost1.43.0,inotify api,rsync command开发,主要用于服务器同步,web镜像等功能.其对linux系统文件系统产生的临时文件和重复的文件操作能够进行过滤,所以在结合rsync

【初学菜鸟作--邮件服务的简单配置案例】

邮件服务器的配置以及使用 实验一:                    实验目的:简单搭建出邮件服务器并测试其可用性                    实验环境:DNS服务器一台,安装有Portfix的邮件服务器一台 实验步骤: 一.邮件的发送(SMTP) 1.在邮件服务器配置主机名,ip,并安装portfix并启动 [[email protected]~]# tail -2 /etc/sysconfig/network HOSTNAME=mail.tarena.com   [[email

IRF 配置案例

IRF是跨设备的链路聚合,主要是提高网络的带宽,增强网络的可靠性. 配置案例 (1)首先将两台两台交换机用XGE相连,启动: (2)[s1]irf member 1 renumuber 1 (3)进接口T1/0/49 T1/0/50 将接口shuodwon (4)[s1]irf-port 1/2 接口加入到组中 (5)[s1]irf-port-configguration active 激活备份组. 这样s1就配置好了. 接下来配置s2 (6)[s1]irf member 1 renumuber

Flume NG 学习笔记（二）单机与集群Flume 配置

下面的内容基本来自官网:http://flume.apache.org/FlumeUserGuide.html 本文使用的是最新版本的apache flume 1.5,安装完Flume然后测试下Flume是否可以用,在Flume目录下用以下语句测试: bin/flume-ng agent -n$agent_name -c conf -f conf/flume-conf.properties.template 结果如图显示: Ok,我们接下去看下面常用架构.功能配置示例 一.最简单的单一代理Flu

关于flume配置加载（二）

为什么翻flume的代码,一方面是确实遇到了问题,另一方面是想翻一下flume的源码,看看有什么收获,现在收获还谈不上,因为要继续总结.不够已经够解决问题了,而且确实有好的代码,后续会继续慢慢分享,这里先把启动的流程分析一下,这也是找到问题症结的关键. 至于遇到的问题如下: Caused by: org.apache.flume.ChannelException: Put queue for MemoryTransaction of capacity 100 full, consider com

QOS原理及配置案例

可聚合网络: 语音和视频流量之间共存 带宽缺乏.端到端延迟.抖动延迟.丢包 解决带宽匮乏: 1,更新带宽 2,转发作重要的流量 3,压缩2层 4,压缩3层流 延迟: 1,处理延迟 2,队列延迟 3,串行延迟(8bit转换成一个字节) 4,链路延迟 解决延迟: 1,更新带宽 2,转发重要的流量 3,压缩2层负载 4,压缩ip包头 丢包率: 1,tail drops:超过一定深度队列的数据包被丢弃 1,network audit网络审计 2,business audit商务审计 3,service

https和server-status配置案例

https和server-status配置案例 作者:尹正杰 版权声明:原创作品,谢绝转载!否则将追究法律责任. 一.https协议 我们知道http协议是明文的,所以,你的数据发送不管是请求报文(request)还是响应报文(response)统统都是明文的.对于很多数据来讲都是无所谓的,因为你的网站就是让别人来访问的,但是你想访问一些敏感的资源(比如,你登录支付宝,登录淘宝账号,银行网站等等)就显得不是那么靠谱了,你想想把你的银行卡号和密码以及你的身份证ID直接放在互联网上裸奔这意味着什么?

keepalived + lvs + nginx 主备配置案例

一.keepalived lvs 集群1.结构2.主备修改内核参数net.ipv4.ip_forward = 1net.ipv4.ip_nonlocal_bind = 1net.ipv4.conf.lo.arp_ignore = 1net.ipv4.conf.lo.arp_announce = 2net.ipv4.conf.all.arp_ignore = 1net.ipv4.conf.all.arp_announce = 2 注:如果遇到提示是缺少包,yum 安装即可 3.启动keepaliv